Handleiding Philips GC1850 Strijkijzer

Handleiding

ENGLISH

General description (fig. 1)IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

A Temperature control dial

B Steam control dial

O = no steam

q = moderate steam

w = maximum steam

x = Calc-Clean function

C Spray button T

D Spray nozzle

E Temperature pilot light

F Water filling opening

G Water tank

H Type plate

I Cord

J Extra Steam function (press steam control dial) (type GC1580)

K Auto shut-off (type GC1580)

L Release button for water tank

M Shot of Steam function (type GC1575)

ImportantIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

For optimal safety, read these instructions carefully and look at the illustrations before

you start using the appliance.

Keep these instructions for future reference.

◗ Never leave the iron unattended when it is connected to the mains.

◗ This appliance is not intended for use by children.

◗ Keep an eye on children to make sure that they do not play with the appliance.

◗ The soleplate of the iron can become extremely hot and may cause burns if

touched.

◗ Never use the appliance if it is damaged in any way.

◗ When you have finished ironing, when you clean the appliance, when you fill or

empty the water tank and also when you leave the iron even for a short while:

set the steam control to position O, put the iron on its heel and remove the

mains plug from the wall socket.

◗ If the supply cord is damaged, it must be replaced by a special Philips or its

service agent or a similarly qualified person in order to avoid a hazard.

◗ Check if the voltage indicated on the type plate corresponds to the local mains

voltage before you connect the appliance.

Before first useIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

1 Remove sticker or protective foil from the soleplate if there is any.

2 Heat up the iron to the maximum temperature and pass the iron over a piece

of damp cloth for several minutes to remove any residues from the soleplate.

The iron may give off some smoke when you use it for the first time. This will cease

after a short while.

Filling the water tankIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

Never immerse the iron in water.

1 Remove the mains plug from the wall socket.

2 Set the steam control to position O (= no steam) (fig. 2).

3 Press and hold the release button and remove the detachable water tank

(fig. 3).

4 Fill the water tank with cold tap water up to the maximum level (fig. 4).

Do not fill the water tank beyond the MAX indication.

Only use water. Do not use vinegar, starch, ironing concentrates or chemically

descaled water.

If the tap water in your area is very hard, we advise you to mix it with an equal

amount of distilled water or to use distilled water only.

5 Push the water tank back into the iron until you hear a ‘click’.

Setting the temperatureIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

1 Put the iron on its heel.

2 Check the garment label for the required ironing temperature:

1 Synthetic fabrics (e.g. acrylic, viscose, polyamide, polyester)

1 Silk

2 Wool

3 Cotton, linen

If you do not know what kind of fabric(s) a garment is made of, determine the right

ironing temperature by ironing a part that will be invisible when you wear the

garment.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent

shiny patches. Avoid using the spray function to prevent stains.

Start ironing the articles that require the lowest ironing temperature, such as those

made of synthetic fibres.

3 Set the temperature control dial to the required ironing temperature by

turning it to the appropriate temperature indication (fig. 5).

4 Put the mains plug in an earthed wall socket.

5 When the temperature pilot light has gone out, wait a while before you start

ironing (fig. 6).

The pilot light will go on from time to time during ironing.

Steam ironingIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

1 Make sure that there is enough water in the water tank.

2 After the temperature pilot light has gone out, set the steam control to the

appropriate steam position (fig. 7).

q for moderate steam (temperature settings 2 to MAX)

w for maximum steam (temperature settings 3 to MAX)

The iron will start producing steam as soon as the set temperature has been

reached.

3 Set the temperature control dial to the recommended position.

See 'Setting the temperature'.

Ironing without steamIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

1 Set the steam control dial to position O (= no steam).

2 Set the temperature control dial to the recommended position.

See 'Setting the temperature'.

Other featuresIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

Spray function

To remove stubborn creases at any temperature

◗ Make sure there is enough water in the water tank.

1 Press the spray button several times to moisten the article to be ironed

(fig. 8).

Extra Steam (type GC1580)

This function provides extra steam to remove very stubborn creases.

◗ The Extra Steam function only works at temperature settings between 3

and MAX.

1 Set the steam control dial to the maximum position w (fig. 9).

2 Press and hold the steam control dial for maximal 5 seconds (fig. 10).

3 Release the steam control dial and wait at least 1 minute before using this

function again to prevent water from dripping out of the soleplate.

Shot of steam (type GC1575)

A powerful shot of steam helps to remove stubborn creases.

Use the Shot-of-Steam function only at temperature settings between 3 and

MAX.

1 Press and release the Shot of steam button (fig. 11).

Wait for while before using the button again to avoid spluttering.

Never direct the steam towards people.

ASO - Auto shut off (type GC1580)

An electronic safety device will automatically switch off the iron if it has not been

removed for a while.

To indicate that the iron has been switched-off, the red auto-off pilot light will start

blinking (fig. 12).

- In a horizontal position, this will happen after 30 seconds.

- In a vertical position, this will happen after 8 minutes.

To heat up the iron again:

- Pick up the iron or move it slightly.

- The red auto-off pilot light will go out. The amber temperature pilot light will go

on.

- When the amber pilot light has gone out and goes on again, the iron is ready for

use.

Cleaning and maintenanceIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

Calc-Clean function

The Calc-Clean function removes scale and impurities.

4239.000.5257.3

2/9

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Philips GC1850 Strijkijzer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Philips. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Philips GC1850 Strijkijzer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Philips Strijkijzers
Meer handleidingen voor Strijkijzers

Veelgestelde vragen over Philips GC1850 Strijkijzer

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Philips DST7022 Strijkijzer

Handleiding

Philips GC3829 Strijkijzer

Handleiding

Philips GC8652 PerfectCare Aqua Strijkijzer

Handleiding

Philips GC6405 Strijkijzer

Handleiding

Philips DST8030 Azur Strijkijzer

Handleiding

Philips GC4558 Strijkijzer

Handleiding

Philips GC8565 ComfortCare Strijkijzer

Handleiding

Philips GC4889 Azur Pro Strijkijzer

Gerelateerde categorieën