Handleiding Pixel E11 Vertax (Canon 5D Mark III) Battery grip

Handleiding

Battery Grip Vertax 电池盒兼手柄 电池盒兼手柄 E-11

Instructions

使用说明书使用说明书

Thank you for purchasing a PIXEL product.

感谢你购买品色产品。

The Vertax is a battery grip that can hold 2pcs battery LP-E6 or 6pcs size

AA/LR6 batteries. It is also equipped with a vertical-grip shutter button. Multi

selector Attachment wheel,Main Dial, etc. to enable shooting in the same way as

with horizontal grip.

E-11是一个可以装两个电池LP-E6或6个AA/LR6尺寸电池的电池盒兼手柄。本电

池手柄还配有纵向位置快门按钮、多重选择器、主拨盘等，使你在纵向拍摄时与横向

拍摄时的操作方式相同。

在使用本产品之前，请务必仔细阅读本使用说明书。

请务必妥善保管好本书，以便日后能随时查阅。

请在充分理解内容的基础上，正确使用。

1. Remove the battery from the camera.(Fig.1-1)

2. Remove the camera battery compartment cover.(Fig.1-2)

3. Insert the detached cover into its storage slot to ensure that it will not be lost.

(Fig.2)

When taking out the cover, press lightly on the cover hinge and pull it out

upward at a slanted angle.

4. Remove the protection cover, and then insert the electrical contacts into the

camera battery compartment (Fig.3-1)

5. Align the attachment screw with the camera's tripod socket, and then turn the

attach/detach knob to tighten securely. (Fig.3-2)

1.从相机中取出电池。（图1-1）

2.卸下相机电池仓盖。（图1-2）

3.将卸下的电池仓盖插入存放区，以免丢失（图2）。

当取出电池仓盖时，请轻轻的按住电池仓盖的转轴，并以倾斜的角度向上将其拉出。

4.卸下保护盖，然后将电子触点部插入相机电池仓。（图3-1）

5.将固定螺钉与相机三脚架接孔对准，然后拧紧装卸旋钮。（图3-2）

Do not further push open the battery compartment cover when it is already

opened. Doing so may damage its hinge.

Be sure to attach the battery grip to the camera before inserting the batteries.

The results of the battery check may not be displayed properly if you attach

the battery grip to the camera with the batteries already inside.

Before moving the battery grip from the camera, be sure to turn the camera's

power switch to (off), and take out the batteries. After removing the batteries,

attach the protective cover to the electrical contacts.

当电池 仓盖已打 开时， 请不要 继 续推开 仓盖。 这样做可 能会损 坏电池仓 盖得转

轴。

在插入电池之前，请务必先将电池手柄安装到相机上。如果您将已装入电池的电

池手柄安装到相机上，则相机可能无法正确地显示电池电量检测结果。

将电池手柄从相机上卸下之前，请务必先将相机的电源开关拨到(OFF)位置并取出

电池。取出电池后，请为电子触点安装保护盖。

１. 拨出 后，按照箭头所示反向转动，然后拉出电池夹

(BGM-E9L)。(图4)

２.在电池夹(LP-E6用)中装入单个或两个电池 LP-E6。（图5）

３.将电池夹装入电池手柄。(图6-1)

４.关闭电池仓锁把手。(图6-２)

电池仓锁把手

如果只使用单个电池，可将其装在右侧或左侧。

如果安装了两个电池，则两个电池同时供电。可装入两个电量不同的电池并且使

用起来不会有任何问题。

长时间不使用相机时，请从电池手柄中取出锂电电池。

１.将电池装入电池夹 Ａ 尺寸用 。 图7

按照图示所示，确保电池的正负触点朝向正确。

２.将电池夹装入电池手柄。(图8-1)

３.关闭电池仓锁把手。(图8-2)

BGM-E9 (AA/LR6 ) ( )

使用 尺寸电池时，能够拍摄的图像较少。此外，根据电池的品牌和存放条

件，能够拍摄的图像张数可能不同，因此建议您只在紧急的情况下使用AA/LR6尺

寸电池。

利用非充电式AA/LR6尺寸电池时，请在20℃以上的温度下使用６个相同品牌的新

电池。在低温条件下或新旧电池混合使用时，相机可能不工作。

AA/LR6

Attach to the Camera

Lithium Battery Installation

AA/LR6 Battery Installation

Using the Battery Grip

Specifications

安装到相机

安装锂电电池

装入 尺寸电池AA/LR6

产品规格及外观如有变化，恕不另行通知。

规格

１.将纵向位置操作开关转到 位置 以使

用电池手柄按钮和拨盘功能与相机相应部分

的功能相同。

２.在进行横向位置拍摄时，请将纵向位置开关

转到(OFF)位置，以免不小心使用电池手柄上

的按钮或拨盘。

３.可以在相机上查看电池电量，如右图。

(ON) (图9)

使用电池手柄

现在，你可以体验无与伦比的品色产品。如有任何疑问可以向当地经销商咨询，

或登陆 http://www.pixelhk.com.cn查询

本说明书中的信息更新至2012年05月01日，如果要与此日期之后发布的产品组合

使用，有关信息请向品色经销商咨询。

PSM90 V10.02

1. After flipping out the release handle, turn it as shown by the arrow, and then

pull out the battery magazine (BGM-E9L). (Fig.4)

2. Insert one or two Battery LP-E6 into the battery magazine (for LP-E6). (Fig.5)

3. Attach the battery magazine into the battery grip. (Fig.6-1) After attaching,

check that the battery magazine is securely attached to the battery grip.

4. Close the release handle. (Fig.6-2)

If only one battery is used, it can be inserted in either the right or left side.

If two battery packs are inserted, power is supplied simultaneously by both

batteries. Two batteries with different charging levels can be inserted and used

without any problems.

Removing the battery packs or size – AA/LR6 batteries from the battery grip

when the camera will not be used for an extended period.

1. Insert the batteries into the Battery Magazine BGM-E9A (for Batteries). (Fig.7)

Make sure the +and –battery contacts are properly oriented as shown in the

figure.

2. Attach the battery magazine into the battery grip. (Fig.8-1)

3. Close the release handle. (Fig.8-2)

Less images can be shot when using size-AA/LR6 batteries. Also, the number

of possible shots may vary depending on the batteries brand and storage

conditions, so usage of size-AA/LR6 batteries is recommended only for

emergencies.

When using with non-rechargable size AA/LR6 batteries, please use when

temperature is above 20℃ . The camera may not work when used in low

temperature or when old and new batteries are used together.

1. Turning the vertical-grip operation switch to

(ON)(Fig.9)make the battery grip buttons and

dial function in the same way as those on the

camera.

2. When shooting in the horizontal-grip position,

turn the vertical-grip operation switch to (OFF)

so that you will not accidentally use the buttons

or dial on the battery grip.

3. The battery power level can be checked on the

camera,such as the right Fig.

The product specifications and exterior are subjected to change without notice.

This manual information is updated at 1st May, 2012. If you wish to use this

product combined with other Pixel products published after this date; please

consult with the PIXEL dealer for further information.

Now you can start to use incredible PIXEL product. If you have any question,

please contact your local dealer or visit to http://www.pixelhk.com

Battery: 1 or 2 of LP-E6 Battery, Or 6pcs AA/LR 6 Alkaline Battery

Power switch: Camera's Power Switch

Working temperature: 0℃-+40℃

Working humidity: 85% Or Less

Dimensions: Approx.153.1(W)x113.3(H)x85.7(D)mm

Weight: Approx.279.4 g(without batteries and battery magazine)

电源

(1)一个或两个电池LP-E6

(2)６个AA/LR6尺寸碱性电池

电源开关

相机的电源开关

工作温度范围

0℃-+40℃

工作湿度范围

85％或更小

尺寸

约153.1(宽)x113.3(高)x85.7(厚)ｍｍ

重量

约279.4克(不含电池和电池夹的重量)

制造商： 品色（香港）企业有限公司

地 址：香港九龙荔枝角青山道704号合兴工业大厦4楼

电 话：(852) 2384-1188

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Pixel E11 Vertax (Canon 5D Mark III) Battery grip. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Pixel. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Pixel E11 Vertax (Canon 5D Mark III) Battery grip in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Pixel Battery grips
Meer handleidingen voor Battery grips

Gerelateerde producten

Handleiding

Vello BG-S6 Battery grip

Handleiding

Walimex Canon 7D Battery grip

Handleiding

Fujifilm VG-XT1 Battery grip

Handleiding

Vello BG-C12 Battery grip

Handleiding

Panasonic DMW-BGS1PP Lumix Battery grip

Handleiding

Vello BG-N7-2 Battery grip

Handleiding

Vello BG-N12 Battery grip

Handleiding

Vello BG-N19 Battery grip

Gerelateerde categorieën