- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Check the contents of your package for the following parts:
Fast Ethernet
Switch x 1
5V DC
1A Power
Adapter x 1
User’s
Manual x 1
If any of these are missing or damaged, please contact
your dealer immediately; if possible, retain the carton
including the original packing material, and use them again
to repack the product in case there is a need to return it to
us for repair.
3. Switch Front Panel
Figures 3-1 and 3-2 show the front panel of FSD-503 and
FSD-803, respectively.
Figure 3-1: FSD-503 Front Panel
Figure 3-2: FSD-803 Front Panel
6. Installing the Switch
This part describes how to install your Fast Ethernet Switch
and make connections to it. Please read the following topics
and perform the procedures in the order being presented.
Note
This Switch does not need software
configuration.
Desktop Installation
To install the Switch on desktop, simply follow the following
steps:
Step 1: Place the Switch on the desk near a power source.
Step 2: Keep some ventilation space between the Switch
and the surrounding objects.
Note
When choosing a location, please keep in
mind the environmental restrictions discussed
in Chapter 7 under Product Specifications.
5. Switch Rear Panel
Figures 5-1 and 5-2 show the rear panel of FSD-503 and
FSD-803, respectively.
12345
5V DC
ON
OFF
Figure 5-1: FSD-503 Rear Panel
Figure 5-2: FSD-803 Rear Panel
2. Product Features
RJ-45 Interface
5/8 10/100Mbps Fast Ethernet ports
Complies with IEEE 802.3, 10Base-T, IEEE 802.3u
100Base-TX Ethernet standards
Supports Auto MDI/MDI-X function
Switching
Hardware based 10/100Mbps, half / full duplex, ow
control and auto-negotiation
Features Store-and-Forward mode with wire-speed
lteringandforwardingrates
IEEE 802.3x ow control for full duplex operation and
backpressure for half duplex operation
Integrated address look-up engine, supporting 2K / 1K
absolute MAC addresses (FSD-503 / FSD-803)
Handles up to 1536bytes packet
Automatic address learning and address aging
Supports CSMA/CD protocol
Hardware
Made from metal, desktop size and wall-mount design
LED indicators for system power, per port Link / Act
5V DC, 1A external power adapter
One power on/off button for energy saving
FCC, CE Class B compliant
4. LED Indicators
FSD-503/FSD-803
LED Color Function
PWR Green
Light
Indicates that the Switch is powered
ON.
OFF
Indicates that the Switch is powered
OFF.
Link/
ACT
Green
Light
Indicates the link through that
port is successfully established at
10/100Mbps.
Blink
Indicates the Switch is actively
sending or receiving data over that
port.
Power
Notice
1. The device is a power-required device,
meaning it will not work till it is powered.
If your networks should be active all
the time, please consider using UPS
(Uninterrupted Power Supply) for your
device. It will prevent you from network
data loss or network downtime.
2. In some area, installing a surge
suppression device may also help to protect
your Switch from being damaged by
unregulated surge or current to the Switch
or the power adapter.
Step 3: Connect your Switch to network devices.
A. Connect one end of a standard network cable
to the 10/100 RJ-45 ports on the Rear Panel of
the Switch.
B. Connect the other end of the cable to the
network devices such as printer servers,
workstations or routers, etc.
Step 4: Supply power to the Switch.
A. Connect one end of the power cable to the
Switch.
B. Connect the 5V DC power adapter to a
standard wall outlet.
When the Switch receives power, the Power LED should
remain solid Green.
PC/Laptop
xDSL/Cable Router
Internet
Power Adapter
RJ-45
RJ-45
Power
001101010
Praat mee over dit product
Laat hier weten wat jij vindt van de Planet FSD-503 Switch. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.