Home > Computers & Software > Switches > Planet Switches > Planet GSW-1820HP Switch

Handleiding Planet GSW-1820HP Switch

Handleiding voor je Planet GSW-1820HP Switch nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET 16-/24-Port 10/100/1000T 802.3at

PoE+ Ethernet Switches, GSW-1820HP and GSW-2620HP. “802.3at

PoE+ Switches” mentioned in this Guide refers to the GSW-1820HP

and GSW-2620HP.

Open the box of the 802.3at PoE+ Switches and carefully unpack it. The

box should contain the following items:

The 802.3at PoE+ Switch x 1 User’s Manual x 1 Power Cord x 1

SFP Dust Cap

x 2

Screws x 8

Rack-mounting

Brackets x 2

Rubber Feet

x 4

If any of these pieces are missing or damaged, please contact your

dealer immediately; if possible, retain the carton including the original

packing material, and use them again to repack the product in case

there is a need to return it to us for repair.

 For GSW-2620HP:

- Ports 1 to 22 will isolate respectively.

- Ports 1 to 22 can only communicate with ports 23~24

(uplink ports) and SFP ports 25~26

 Extend mode: Ports 1 to 8 have a data rate of 10Mbps; the

farthest transmission distance up to 250 meters and all ports

can communicate with each other.

 The DIP switch can isolate ports to prevent broadcast storm and

defend DHCP spoong

 Automatic address learning and address aging

 Supports Energy-Ecient Ethernet (EEE) function (IEEE 802.3az)

 Hardware

 19-inch rack-mount size, 1U height

 LED indicators for system power, per port PoE ready and PoE

activity, speed, Link/Act

 Ethernet Link Energy-saving technology

- Link down power saving

- Intelligent scale power based on cable length

3.ProductSpecications

Model GSW-1820HP GSW-2620HP

Hardware Specications

10/100/1000BASE-T

Copper Ports

16 auto-MDI/MDI-X

ports

24 auto-MDI/MDI-X

ports

802.3af/802.3at

PoE+ Injector Ports

16 24

1000BASE-X SFP

Ports

2 2

 Per 10/100/1000BASE-T Port

LED Color Function

1000

LNK/ACT

Green

Lights to indicate the link through that port

is successfully established at 1000Mbps.

Blinks to indicate that the Switch is actively

sending or receiving data over that port.

10/100

LNK/ACT

Amber

Lights to indicate the link through that port

is successfully established at 10/100Mbps.

Blinks to indicate that the Switch is actively

sending or receiving data over that port.

PoE in

Use

Amber

Lights to indicate the port is providing 54V

DC in-line power.

 Per 1000BASE-X SFP Interface

LED Color Function

1000

LNK/ACT

Green

Lights to indicate the link through that port

is successfully established at 1000Mbps.

Blinks to indicate that the Switch is actively

sending or receiving data over that port.

4.3 Multiple Functions of DIP Switch

The front panel of the 802.3at PoE+ Switch provides one DIP switch for

Standard, VLAN and Extend mode selections. The detailed descriptions

are shown in the following table.

Power over Ethernet

PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE

PoE Power Supply

Type

End-span:

1/2 (+), 3/6 (-)

End-span:

1/2 (+), 3/6 (-)

PoE Power Output

Per port 54V DC, 300mA. max. 15.4 watts

(IEEE 802.3af)

Per port 54V DC, 600mA. max. 30 watts

(IEEE 802.3at)

PoE Power Budget 240 watts

Number of PDs,

7 watts

16 24

Number of PDs,

15.4 watts

15 15

Number of PDs,

30 watts

8 8

Standards Conformance

Regulatory

Compliance

FCC Part 15 Class A, CE

Standards

Compliance

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab Gigabit 1000BASE-T

IEEE 802.3z Gigabit SX/LX

IEEE 802.3x ow control and back pressure

IEEE 802.3af Power over Ethernet

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3az Energy-Ecient Ethernet

Environment

Operating

Temperature: 0 ~ 50 degrees C

Relative Humidity: 5 ~ 95% (non-condensing)

Storage

Temperature: -10 ~ 70 degrees C

Relative Humidity: 5 ~ 95% (non-condensing)

2. Product Features

 Physical Port

 16-/24-port 10/100/1000BASE-T Gigabit RJ45 copper

 2 1000BASE-X SFP slots

 Power over Ethernet

 Complies with IEEE 802.3af/at Power over Ethernet end-span PSE

 Up to 16/24 ports of IEEE 802.3af / 802.3at devices powered

 Supports PoE power up to 30 watts for each PoE port, all power

up to 240W PoE budget.

 Each port supports 54V DC power to PoE powered device

 Auto detects powered device (PD)

 Circuit protection prevents power interference between ports

 Remote power feeding up to 100m in standard mode with 250m in

extend mode

 Switching

 Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/

MDI-X

 Supports IEEE 802.3x ow control for Full-duplex Mode and back-

pressure for Half-duplex Mode

 Integrates address look-up engine, supporting 8K absolute MAC

addresses

 9K jumbo frame supports all speeds (10/100/1000Mbps)

 IEEE 802.1Q VLAN transparency

 Hardware-based DIP switch for Standard, VLAN and Extend

mode selection;

 VLAN mode:

 For GSW-1820HP:

- Ports 1 to 14 will isolate respectively.

- Ports 1 to 14 can only communicate with ports 15~16

(uplink ports) and SFP ports 17~18.

DIP Switch

Selectable operation mode

 Standard

 VLAN

 Extend

Dimensions

(W x D x H)

440 x 208 x 44 mm (1U height)

Enclosure Metal

Weight 2.55kg 2.79kg

Power Requirements

100~240V AC,

50/60Hz, 3A max.

100~240V AC,

50/60Hz, 3A max.

Power Consumption/

Dissipation

Max. 275 watts/938

BTU

Max. 282 watts/962

BTU

Thermal Fan 2

LED

 System:

Power (Green)

 10/100/1000T RJ45 Interfaces

1000 LNK/ACT (Green),

10/100 LNK/ACT (Amber),

PoE (Amber)

 1000X SFP Interfaces

1000 LNK/ACT (Green)

Switching Specications

Switch Architecture Store-and-Forward

Switch Fabric 36Gbps/non-blocking 52Gbps/non-blocking

Switch

Throughput@64bytes

26.8Mpps 38.7Mpps

MAC Address Table 8K entries

Jumbo Frame 9216 bytes

Flow Control

IEEE 802.3x pause frame for full duplex;

back pressure for half duplex

4. Hardware Introduction

4.1 Front Panel

The Front Panel of the 802.3at PoE+ Switch consists of 16/24 auto-

sensing 10/100/1000Mbps Ethernet RJ45 ports. The LED Indicators are

also located on the front panel of the 802.3at PoE+ Switch.

1 3 5 7 9 11 13 15

162

PWR

4 6 8 10 12 14

GSW-1820HP

PoE-in-Use

ACTLNK1000

ACTLNK10/100

PoE-in-Use

ACTLNK1000

Standard

Extend

VLAN

17 18

16-Port 10/100/1000T

802.3at PoE

2-Port 1000X SFP Gigabit Ethernet Switch

10 12 14 16

9 11 13 15

2 4 6 8

1 3 5 7

Figure 4-1: GSW-1820HP Switch Front Panel

1 3 5 7 9 11 13 15 17 19 21 23

PWR

4 6 8 10 12 14 16 18 20 22 24

GSW-2620HP

PoE-in-Use

ACTLNK1000

ACTLNK10/100

PoE-in-Use

ACTLNK1000

Standard

Extend

VLAN

18 20 22 24

17 19 21 23

10 12 14 16

9 11 13 15

2 4 6 8

1 3 5 7

24-Port 10/100/1000T

802.3at PoE

2-Port 1000X SFP Gigabit Ethernet Switch

Figure 4-2: GSW-2620HP Switch Front Panel

4.2 LED Indicators

 System

LED Color Function

PWR Green Lights to indicate the Switch has power.

DIP Switch Mode Function

Standard

VLAN

Extend

This mode makes the 802.3at PoE+ Switch

operate as a general switch and all PoE

ports operate at 10/100/1000Mbps auto-

negotiation. All ports can communicate with

one another.

Standard

VLAN

Extend

This mode makes the 802.3at PoE+ Switch

operate as a VLAN isolation switch and

For GSW-1820HP:

1. Ports 1 to 14 will isolate respectively.

2. Ports 1 to 14 can only communicate with

ports 15~16 (uplink ports) and SFP ports

17~18.

For GSW-2620HP:

1. Ports 1 to 22 will isolate respectivelyy.

2. Ports 1 to 22 can only communicate with

ports 23~24 (uplink ports) and SFP ports

25~26.

Standard

VLAN

Extend

This mode makes the 802.3at PoE+ Switch

operate as a Long Reach PoE switch and

1. Ports 1 to 8 support farthest transmission

distance of up to 250 meters

2. Ports 1 to 8 have a data rate of 10Mbps

3. All ports can communicate with one

another.

Note

Please adjust the DIP switch before powering on the

802.3at PoE+ Switch.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Planet GSW-1820HP Switch. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Planet. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Planet GSW-1820HP Switch in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk	Planet
Model	GSW-1820HP
Categorie	Switches
Bestandstype	PDF
Bestandsgrootte	1.83 MB

Alle handleidingen voor Planet Switches
Meer handleidingen voor Switches

Beoordeling

Laat ons weten wat je van de Planet GSW-1820HP Switch vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.

Bent u tevreden over de Planet GSW-1820HP Switch?
Ja Nee

Beoordeel dit product als eerste

0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Planet GSW-1820HP Switch. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.