Handleiding Pro-Ject Essential II Phono USB Platenspeler

Handleiding voor je Pro-Ject Essential II Phono USB Platenspeler nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 1 veelgestelde vraag, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

© Audio Trade GmbH · Pro-Ject Essential II/Phono USB / Pro 8.6 / Ortofon OM 5E · Revision 2013.6.15
4
Anti-skating force adjustment
Hang the loop of the thread of the anti-skating weight in the groove of the anti-skating stub (8) corresponding
to the downforce applied to your cartridge and feed the thread through the loop of the wire support (9).
The anti-skating force must be adjusted corresponding to the downforce as follows:
Downforce
Groove in the stub (8)
10 - 14mN 1
st
from bearing rings
15 - 19mN 2
nd
" " "
20mN and bigger
3
rd
" " "
8
Fitting the lid
Fit the lid (dust cover ) carefully over the hinge prongs and adjust the screws (14) until the lid stays open where you
want it to without being too stiff to open or close.
Connection to the amplifier
The record player has gold plated female RCA phono sockets (12) so you can substitute the interconnect cables
supplied with those of your choice for connection to the amplifier if you wish. Your dealer can advise you on
alternative cables. Use a line input (such as AUX, CD, Tuner, Tape or Video) on your amplifier.
!
Due to the built in phono pre-amplifier, a phono input (sometimes labelled gram, disc or RIAA) is not
suitable.
Take care to connect the left and right channels correctly. The right channel is usually marked red, the left
channel black or white. Check the manual supplied with your amplifier for relevant information. The earthing
wire of the tonearm lead should be connected to the earth terminal on your amplifier (if provided).
The 3,5 mm connector (supplied) can be used to connect your Pro-Ject record player to any line level/auxiliary
input (Computer, Midi System, Mixer etc.).
Connect the socket end to the phono plugs at the end of the audio trailing lead from your turntable and
insert the 3,5 mm plug into the relevant socket on your audio component.
Connecting to a Computer
Connect the USB-output of the unit to a free USB-socket on your computer and turn it on/make sure it is
powered on.
The “new hardware found assistant“ will automatically detect the unit and announces it as a Microphone USB
audio codec. There is no need to install a driver manually.
After installation, one setting has to be done. For example - Windows 7
®
operating system:
Control Panel Sound Recording Microphone USB Audio CODEC Properties
Advanced: set to 2 channel, 16 bit, 48000 Hz (DVD Quality)
Please note: Connection should be made to an USB-socket of your computer directly. Connecting to
USB-hubs or switches can cause problems.
Recording Programme
In case you do not have a recording programme installed on your computer, you may download one free from
the Internet. Recording programmes may be found by searching Google.
In the menu of the recording programme, source or input may have to be set to Microphone USB audio codec.
Please be aware that downloads from the Internet are made entirely at your own risk. Under no
circumstances can we carry responsibility or provide support for third-party software products sourced
from the internet or for any damage or problems arising from the use thereof. All downloads should
be checked with an up-to-date anti-virus programme. License fees may be applicable.
Mains power connection
The turntable is supplied with a power supply suitable for your country's mains supply. Check the label before
connecting to ensure compliance with the mains rating in your house.
Connect the low voltage plug from the power supply to the socket (13) on the rear of the record player
before connecting the power supply to the mains.
Download de handleiding in het Nederlands en/of Engels (PDF, 0.12 MB)
(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…

Beoordeling

Laat ons weten wat je van de Pro-Ject Essential II Phono USB Platenspeler vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Bent u tevreden over de Pro-Ject Essential II Phono USB Platenspeler?
Ja Nee
Beoordeel dit product als eerste
0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Pro-Ject Essential II Phono USB Platenspeler. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Pro-Ject Essential II Phono USB Platenspeler. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Pro-Ject. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Pro-Ject Essential II Phono USB Platenspeler in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk Pro-Ject
Model Essential II Phono USB
Categorie Platenspelers
Bestandstype PDF
Bestandsgrootte 0.12 MB

Alle handleidingen voor Pro-Ject Platenspelers
Meer handleidingen voor Platenspelers

Veelgestelde vragen over Pro-Ject Essential II Phono USB Platenspeler

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Wanneer moet ik de naald van mijn platenspeler vervangen? Geverifieerd

Dit hangt af van de naald, maar het is te zeggen dat een naald 500-2000 speeluren mee gaat, afhankelijk van de kwaliteit van de naald. Vervang bij aankoop van een tweedehands platenspeler altijd preventief de naald. Een naald niet tijdig vervangen kan leiden tot schade aan de platen.

Ik vind dit nuttig (303) Lees meer
Handleiding Pro-Ject Essential II Phono USB Platenspeler

Gerelateerde producten

Gerelateerde categorieën