Handleiding Renkforce 1507156 USB 2.0 Kaartlezer
Handleiding voor je Renkforce 1507156 USB 2.0 Kaartlezer nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 2 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.
Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.
Handleiding
Loading…
Connection
Connect the card reader to a free USB port on your computer. Use the included USB extension cable if
required.
Important information concerning use on Windows
®
7:
Additional installation steps are necessary to read/write SIM cards when using Windows
®
7. Proceed as
follows:
• First install the driver/software.
• Connect the card reader to your computer. Windows
®
7 will not locate a required driver and instead
recognizes an “eHome” infrared receiver (Windows
®
7 should indicate that installation has failed).
• Open the Device Manager on the Control Panel. On the Control Panel, rst select “Hardware and Sound”
• Then click “Device Manager”.
• Under “USB Controller” the “eHome infrared receiver (USBCIR)” is marked with an exclamation point as
Windows
®
7 could not launch the hardware.
• Right-click the “eHome infrared receiver (USBCIR)” and select “Update driver software...”.
• Then select “Search for driver software on this computer”.
• Click “Select from a list of device drivers on this computer”.
• The following list should now show e.g. “eHome infrared receiver (USBCIR)” and “USB composite device”.
• Click “USB composite device” and “Next”.
• Now the driver will be correctly integrated. The following message appears: “The driver software was
successfully installed”.
• Click “Close”. Following this set-up procedure, the product and all functions are now available on
Windows
®
7.
Notes
• To read/write SIM cards on Windows
®
, rst start the software “SimEdit”. Then insert your SIM card into
the appropriate slot.
Click on the button “SimEdit Manual” to show the software instructions.
• The SD and microSD slots may not be used at the same time. If both slots are occupied, only the microSD
slot is active.
• The LED lights up when the card reader is connected to the power supply. The LED ashes during data
transfer.
• For older operating systems: Some memory card formats (such as exFAT) might require the installation
of a system patch in order for the card reader to recognize the memory card. Refer to the operating
instructions and the latest update information of your operating system.
• The card reader or the card could get damaged if the card is improperly aligned and inserted.
• Never disconnect the product or remove the card during data transmission. There is a risk of loosing or
corrupting data.
• Properly eject the memory card from the card reader before removing it to prevent data loss, data
corruption or product damage. Observe the operating instructions of your operating system.
Cleaning and care
• Remove the product from the computer before cleaning.
• Never submerge the product in water.
• Clean the product with a dry, bre-free cloth.
• Do not use any abrasive or chemical cleaners.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulll your statutory obligations and contribute to the protection of the environment.
Technical data
Slots ...................................................... SD, microSD, MS, xD, CF, SIM
System requirements ............................ Windows
®
2000/XP/Vista™/7/8/10, from Mac OS X 10.4
Operating conditions ............................ 0 to +60 °C, 20 - 80 % RH
Storage conditions ................................ -20 to +60 °C, 10 - 95 % RH
Dimensions (L x W x H) ........................80 x 48 x 16 mm
Weight ..................................................45 g
Operating instructions
Card reader CR52e USB2.0
Item no. 1507156
Intended use
The product is designed to read and write suitable memory cards of various formats. It can be connected
to a computer via USB.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
cause hazards such as short circuiting, re etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Card reader
• USB cable (90 cm)
• Software CD
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads or scan the printed
QR code. Follow the instructions on the website.
Description of symbols
The symbol with an exclamation mark in a triangle indicates important instructions contained in
these operating instructions that must be followed.
The arrow symbol alerts the user to the presence of important tips and notes on using the
device.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, ammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modications and repairs are to be performed exclusively by an expert or at a
qualied shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Driver/software installation
The CD contains a driver/software for the SIM card reader.
The SIM card reader can be used only on Windows
®
.
The drivers necessary for reading/writing normal cards (SD, MS, etc.) are already integrated into
the operating system.
• Turn on the computer and wait until the operating system has fully loaded.
• Insert the included CD into your computer’s appropriate disk drive. If the installation program does not
start automatically, you need to start it manually (the installation program in the CD’s root folder is called
“autorun.exe” or similar).
• Follow the instructions of the software or your operating system.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE. *1507156_V1_1116_02_IPL_m_en
Loading…
Beoordeling
Laat ons weten wat je van de Renkforce 1507156 USB 2.0 Kaartlezer vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.Meer over deze handleiding
We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Renkforce 1507156 USB 2.0 Kaartlezer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Renkforce. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Renkforce 1507156 USB 2.0 Kaartlezer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.
Specificaties
| Merk | Renkforce |
| Model | 1507156 USB 2.0 |
| Categorie | Kaartlezers |
| Bestandstype | |
| Bestandsgrootte | 0.32 MB |
Alle handleidingen voor Renkforce Kaartlezers
Meer handleidingen voor Kaartlezers
Veelgestelde vragen over Renkforce 1507156 USB 2.0 Kaartlezer
Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.
Waar staat SD voor? Geverifieerd
SD staat voor Secure Digital. SD kaarten zijn het standaard opslagmedium voor veel digitale camera's.
Ik vind dit nuttig (25) Lees meerWaar staat USB voor? Geverifieerd
USB staat voor Universal Serial Bus. Het is een connectiestandaard om apparaten mee aan te sluiten op een computer.
Ik vind dit nuttig (15) Lees meer
Praat mee over dit product
Laat hier weten wat jij vindt van de Renkforce 1507156 USB 2.0 Kaartlezer. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.