Handleiding Rusoh Eliminator Brandblusser

Handleiding voor je Rusoh Eliminator Brandblusser nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 2 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

3
Red cartridge cover
CO
2
CARTRIDGE
Fig. B
Fig. C1
Fig. D
Rusoh
uffing wheel
Hose clip
Fig. C2
AGENT
CARTRIDGE
DISCHARGE
HEAD
Tamper
seal
Puncture lever
Lock in
the locked
position
Broken tamper seal
AGENT
CARTRIDGE
(inverted)
Lock being twisted to unlocked position
DISCHARGE HEAD
The discharge head (Fig. B) is factory sealed to the agent cartridge;
houses the CO
2
cartridge; provides the means to carry the extinguisher
and to puncture the CO
2
cartridge; and, when pressurized, routes the
extinguishing agent to the hose.
The lock (Fig. C1) on the discharge head prevents inadvertent
puncturing of the CO
2
cartridge. To pressurize the unit, twist the lock in
either direction to a vertical position until the yellow tamper seal
(Fig. C2) breaks and falls off. Puncture the CO
2
cartridge by pushing
the yellow puncture lever down. IMPORTANT: If the tamper seal is
broken, disturbed, or missing, you must perform the Annual Inspection
procedure on the extinguisher (see pages 7-8).
CO
2
CARTRIDGE
The CO
2
cartridge is a removable component lled with compressed liquid CO
2
(HMIS 1-0-3). For the Safety Data
Sheet (SDS), refer to www.rusoh.com.
Squeeze the ribbed sides of the red cartridge cover and lift it open to access the CO
2
cartridge (Fig. B).
DANGER!
CO
2
cartridge is under high pressure. Do not puncture or
damage the
CO
2
cartridge.
Do not heat or locate the
CO
2
cartridge near a heat source, such as an engine or stove.
Discharge from the
CO
2
cartridge is very cold and can cause frostbite.
AGENT CARTRIDGE
The agent cartridge contains 6 pounds of Eliminator
multi-purpose dry
chemical extinguishing agent that includes monoammonium phosphate,
mica, talc, and amorphous silica (HMIS 1-0-0). The extinguishing agent is
nontoxic. Refer to www.rusoh.com for the SDS.
The Rusoh
ufng wheel is on the bottom of the agent cartridge
(Fig. D). Turning the wheel stirs or “uffs” the dry chemical agent
ensuring that it is in a free-owing state and ready for use.
The hose clip on the agent cartridge keeps the hose and valve assembly
stationary. It also glows in the dark. When charged by natural or articial
lighting, it will provide luminescence in dark areas for up to eight hours.
VALVE ASSEMBLY
The valve assembly (Fig. A) consists of the hose, valve lever, and valve nozzle. The hose carries the extinguish-
ing agent from the discharge head to the valve. The valve lever provides on/off control of the extinguishing agent.
The valve nozzle is designed to direct the extinguishing agent slightly downward, allowing the user to focus the
discharge at the base of the re.
Download de handleiding in het Nederlands en/of Engels (PDF, 5.25 MB)
(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…

Beoordeling

Laat ons weten wat je van de Rusoh Eliminator Brandblusser vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Bent u tevreden over de Rusoh Eliminator Brandblusser?
Ja Nee
Beoordeel dit product als eerste
0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Rusoh Eliminator Brandblusser. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Rusoh Eliminator Brandblusser. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Rusoh. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Rusoh Eliminator Brandblusser in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk Rusoh
Model Eliminator
Categorie Brandblussers
Bestandstype PDF
Bestandsgrootte 5.25 MB

Alle handleidingen voor Rusoh Brandblussers
Meer handleidingen voor Brandblussers

Veelgestelde vragen over Rusoh Eliminator Brandblusser

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Wanneer moet mijn brandblusser worden vervangen? Geverifieerd

Dit is afhankelijk van het merk en type brandblusser. Je vindt de vervaldatum op een sticker op de cilinderbehuizing van de brandblusser.

Ik vind dit nuttig (56) Lees meer

Mijn brandblusser is gedeukt of beschadigd, kan ik deze nog gebruiken? Geverifieerd

Nee! Een gedeukte of beschadigde brandblusser kan bij gebruik gevaarlijk zijn. Laat hem vervangen.

Ik vind dit nuttig (25) Lees meer
Handleiding Rusoh Eliminator Brandblusser

Gerelateerde producten

Gerelateerde categorieën