Handleiding Safety1st Crystal Clear Babyfoon

Handleiding

FREQUENCY RANGE

Channel 1 Frequency: 49.870, Channel 2 Frequency: 49.850

Carrier Frequency: 49.850 to 49.870

Field Strength is 80 dB Micro-volts per meter at 3 meters.

Features & Components

Quick Start Guide Using Your Monitor (continued)

Use and Care

Helpful Hints

Using Your Monitor

One (1) Year Limited Warranty

Troubleshooting

IF YOU ARE STILL HAVING PROBLEMS, PLEASE CALL TOLL FREE FOR HELP! (800) 544-1108.

©2012 Cosco Management, Inc. All Rights Reserved. Todos derechos reservados.

www.djgusa.com (800) 544-1108 www.safety1st.com Made in CHINA.

Hecho en CHINA. Styles and colors may vary. Los estilos y los colores pueden variar.

Distributed by (distribuido por) Dorel Juvenile Group, Inc., 2525 State St., Columbus,

IN 47201-7494 Dorel Distribution

Canada, 873 Hodge, St. Laurent, 5/2/12

QC H4N 2B1 4358-5848

Register for our eNewsletter and

watch our experts on Safety 1

st

TV

safety1st.com

IMPORTANT:

Safety Instructions

Battery Installation & Use

CAUTION!

THE USER SHOULD NOT ATTEMPT TO

SERVICE OR REPAIR THE MONITOR.

ALL SERVICING SHOULD BE REFERRED

TO SAFETY 1ST CUSTOMER SERVICE

DEPARTMENT: (800) 544-1108.

Please read the following instructions and warnings carefully.

Keep these instructions for future reference.

Tool needed: Phillips Head Screwdriver (not included)

Thank you for purchasing a Safety 1st product. We are not only about safety,

we're also about your satisfaction. If you have any questions or comments,

please call our Consumer Relations department at 1-800-544-1108 or

e-mail us at consumer@safety1st.com

User Guide

MO066

Parent Unit/

Receiver (2)

A

B

C

D

E

F

G

H

I

J

K

L

M

N

Baby Unit/

Transmitter

AC Adapters (3)

Parent Unit (2 Receivers)

Speaker

Power/Channel Switch

Low Battery Indicator

Power On Indicator

Volume Dial

External Earphone Jack

AC Adapter Jack

Belt Clip & Carry Loop

Battery Compartment (3 AAA batteries)

Baby Unit (Transmitter)

Power/Channel Switch

Power On Indicator

Microphone

AC Adapter Jack

AC Adapter

AC Adapter (3)

A

B

C

D

J

K

L

E

F

G

H

I

M

N

• DO NOT mix old and new batteries.

• DO NOT mix alkaline, standard (carbon zinc), or rechargeable

(nickel-cadmium) batteries.

• Only batteries of the same or equivalent type as recommended are to be used.

• Exhausted batteries are to be removed from the unit.

• Keep batteries out of child’s reach. Swallowing a battery could be fatal.

• Used batteries should be disposed of properly.

Do not dispose of batteries in fire - they may explode or leak and cause injury.

• Remove batteries when stored for long periods of non-use.

• DO NOT use audio monitor system in portable mode when batteries are low.

• Ensure that the battery compartment is completely secure after replacing batteries.

BATTERY INSTALLATION:

1. Move belt clip out of way. Unscrew battery

compartment cover as shown.

2. Insert 3 AAA batteries.

3. Replace the battery compartment cover

and tighten screw. To obtain maximum

performance, ALWAYS use alkaline type

batteries in this monitor.

• Parent Unit is a Receiver. Baby Unit is a Transmitter.

• Check the reception regularly.

• Certain electronic devices are sensitive to magnetic

fields and may be damaged permanently or temporarily

disabled if exposed to a magnetic field that is too strong.

• To remove AC adapter from the outlet, firmly grasp the

adapter "brick." DO NOT pull on the cord, as this could damage it.

• The LEDs emit IR (infra red) light that is not harmful.

This monitor is not intended to be used as a medical monitor and

its use should not replace proper adult supervision. You should

check your child’s activity at regular intervals as this monitor will

not alert parents to the silent activities of a child.

CAUTION!

For indoor use only. To reduce the risk of fire or electrical shock,

do not expose this product to water or moisture. NEVER attempt

to disassemble the product. This is dangerous and will void

the warranty.

WARNING!

Plug in here

1 Connect AC adapter to the side of

Parent Unit.

2 Connect AC adapter to the side of Baby Unit.

3 Plug Parent Unit and plug Baby Unit

into wall to operate AC power.

4 Turn Parent Unit on. Slide Power/Channel

switch to desired channel selection.

Power On Indicator will illuminate. Make sure

volume is turned down to avoid squealing.

5 Turn Baby Unit on. Slide Power/Channel

switch to same channel selection as Parent

Unit. Refer to Channel Selection section.

Power On Indicator will illuminate.

Plug in here

Power On &

Channel Select

here

Channel 1

Channel 2

Power On &

Channel Select

here

Channel 1

Channel 2

DO NOT PLACE UNITS IN CRIB OR MOUNT ON CRIB.

KEEP OUT OF REACH OF CHILDREN.

AC ADAPTER

The Parent Unit operates on household electricity with the AC Adapter or

with 3 AAA batteries (not included). The Baby Unit operates on household electricity

with the AC Adapter only. The Parent Unit will automatically convert to AC operation

when used with the AC Adapter. It is not necessary to remove the battery during AC

operation. The Parent Unit will automatically switch back to battery power when plug

is disconnected from the AC Adapter.

The AC Adapter should be used whenever possible on the Parent Unit to save battery

life. This is done by inserting the AC Adapter into the AC Adapter Jack. Then simply

plug the AC Adapter into a nearby standard household outlet (120V AC outlet). The AC

Adapters may become slightly warm to the touch during operation. This is normal.

This AC Adapter is a low voltage power source which allows you to use your house-

hold electricity to run the Baby and Parent Units when it connects to the AC Adapter

Jack in the Parent Unit and in the Baby Unit, and plugs into any standard electrical

outlet in your home.

To remove AC adapter from the outlet, firmly grasp the adapter "brick."

DO NOT pull on the cord, as this could damage it.

CAUTION: This AC Adapter was made with a specific design for the Safety 1st

Monitor. It cannot be used with any other appliance, and never use a different type

of adapter with this Monitor.

Parent Unit (Receiver):

CHANNEL SELECTION

The Monitor can broadcast over four preset factory frequencies or channels. Use

setting “1” making sure that both units are set to “1”. If you experience static or noise

interference, simply switch both units to channel “2”.

POWER INDICATOR

The power indicator is a green LED that indicates that the unit is on and functioning.

VOLUME DIAL

Volume can be easily adjusted to any desired listening level by rotating the Volume

Dial, so you can be sure to hear your baby at all times. The sounds are transmitted

through the wide range speaker. It is essential to check reception regularly. Refer to

Use and Care section.

LOW BATTERY INDICATOR

Low battery power is indicated by the red LED, which signals when the battery needs

to be replaced.

EARPHONE JACK

Earphones (not included) can be plugged into earphone jack on side of Parent Unit.

When earphones are in place, it will mute the speaker.

LINK INDICATOR - OUT OF RANGE

Static noise will be heard if both units are not set

to the same channels or if they are too far apart.

BELT CLIP

The Belt Clip is convenient for portability.

You can clip the Parent Unit to your

belt or waistband after a battery has

been installed. The Belt Clip also

easily converts to a carry loop.

Belt Clip

(down)

Carry Loop

(up)

Baby Unit (Transmitter):

PROPER POSITIONING

IMPORTANT: When choosing locations to set up the Baby Unit and Parent Unit, follow

these guidelines:

• For best sound quality, place Baby Unit 6 feet (2 meters) away from the baby.

• Adjust volume dial on Parent Unit to appropriate level to minimize feedback.

• During use of the monitor, sound quality deteriorates as you reach the

limits of the monitor's range. If this happens, you will need to move the

Parent Unit in closer proximity to the Baby Unit.

• Adjust the volume to a comfortable level for your environment.

The first time you use your monitoring system, two adults

should test it in the following way:

• Place Parent Unit at least 20 ft. (6m) away from Baby Unit.

• Have an adult speak into Baby Unit at various levels (soft to loud)

while another adult checks Parent Unit for the proper sound reception.

Try Parent Unit in every location that it will be used.

Care and Cleaning:

Use a soft, dry cloth to keep your monitor free from dust.

DO NOT immerse product in water.

IMPORTANT:

Use household electricity whenever possible. When the AC Adapter is used with your

household electricity, you will find that the power is stronger and more consistent than

when you rely solely on the battery. Range and sound quality also depends on the

construction of your house. Steel reinforced wall, for example, reduces the effective

range of the monitor. Conserve the battery so you will have power when you don’t

have easy access to AC outlets.

Make sure that both Units are on the same channel.

Even though you may hear you baby’s sounds, proper use of this system requires that

both Units must be on the same channel. If the Units are on different channels, the

signals from the Baby Unit may still be strong enough to be picked up by the Parent

Unit, but there will be a lot of static.

When not using the Unit, remove AC Adapter

and be sure the power button is “OFF”.

When you are not using the AC Adapter, remove it from the Unit and store it in a safe,

dry place until you need it again. If the AC Adapter is plugged into the Parent Unit but

not being used in an electrical outlet, the AC Adapter will prevent battery operation

of the Unit.

When using the AC Adapter with household electricity,

make sure the outlet is “ON”.

Some electrical outlets are powered through a switch in the room. If the Baby Unit is

plugged in and turned “ON”, the power indicator light should be lit. If it is not, try

turning the light switch in the room “ON”.

Dorel Juvenile Group, Inc. warrants to the original purchaser that this Crystal Clear Audio Monitor

2 Receiver Set, is free from material and workmanship defects when used under normal

conditions for a period of one (1) year from the date of purchase. Should the product contain

defects in material or workmanship Dorel Juvenile Group, Inc., will repair or replace the product,

at our option, free of charge. Purchaser will be responsible for all costs associated with

packaging and shipping the product to Dorel Juvenile Group Consumer Relations Department at

the address noted below and all other freight or insurance costs associated with the return.

Dorel Juvenile group will bear the cost of shipping the repaired or replaced product to the

purchaser. Product should be returned in its original package accompanied by a proof of

purchase, either a sales receipt or other proof that the product is within the warranty period.

This warranty is void if the owner repairs or modifies the product or the product has been

damaged as a result of misuse.

This warranty excludes any liability other than that express stated previously, including but not

limited to, and incidental or inconsequential damages.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS

THAT MAY VARY FROM STATE TO STATE.

Thank you again for purchasing a Safety 1st product. We are not only about safety, we’re also

about your satisfaction. If you have any questions or comments, please call our Consumer

Relations department at 1-800-544-1108 or e-mail us at [email protected].

FCC Statement

Radio and Television Interference

Note: This equipment has been tested and found to comply with the limits for a class B digital

device, pursuant to part 15 of the FCC Rules and applicable Industry Canada specifications.

These Limits are designed to provide reasonable protection against harmful interference in a

residential installation. For body worn operation, this product has been tested and meets the

FCC RF exposure guidelines when used with the belt clip supplied or designed with this product.

Use of other accessories may not ensure compliance with the FCC exposure guidelines.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does not cause harmful interference to radio or television

reception, which can be determined by turning this equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

To operate this equipment under the Federal Communications Commission rules.

WARNING: Changes or modifications not expressively approved by Dorel Juvenile Group can void

your authority to operate this equipment.

This Category II radiocommunication device complies with Industry Canada Standard RSS-310.

Crystal Clear

Audio Monitor

2 Receiver Set

PROBLEM

Power indicator light

not working

Static or interference in the

signal transmission

Parent Unit is making

loud noises

Parent Unit is picking up

noises from outside

your home

Weak sound coming

from Parent Unit

Can’t hear baby’s sounds

POSSIBLE CAUSE

Power is not getting to the Unit

Baby and Parent Units may be

on different channels

Appliances with loud fans near Units

may be blocking transmission

Unit may be under fluorescent lights

Local interference from electrical or radio frequency

appliance near your location

Units are too close together

Volume dial on Parent Unit may be too high

Neighbors may have a baby monitor or cordless phone

Battery may be weak

Units may be too far away from each other

Speaker or microphone could be blocked

SOLUTION

Make sure wall outlet is working; may possibly need to be turned on by a switch

Make sure AC adapter is plugged into wall and the Unit

Make sure both Units are on the same channel

(2 channel options: 1 or 2)

Turn off the appliances that may be causing interference

Reduce the distance between the two Units or turn off lights

Switch channel setting on both Parent and Baby Units

Parent Unit needs to be at least 10 feet / 3 meters away from the Baby Unit

Turn down volume on the Parent Unit

Change both Units to the alternative channel

(2 channel options: 1 or 2)

Check battery; replace if necessary

Battery life is short Battery life in the parent unit will last approximately 24hrs Use unit cautiously during battery operation to conserve your battery life

Move the Units closer to each other

Keep speaker/microphone clear from obstructions

WARNING!

Strangulation Hazard - Children

have STRANGLED in cords.

Keep cords out of

reach of children

more than 3 feet

(0.9 m) away.

Strangulation Hazard - Children have STRANGLED

in cords. Keep cords out of reach of children more

than 3 feet (0.9 m) away.

WARNING!

It is essential to check reception regularly.

Please see Use and Care section.

VENTILATION: The Monitor should not be situated on a bed, sofa, rug, or

similar surface that may block the ventilation openings, or placed in an

enclosed installation, such as a book case or cabinet that may impede

the flow of air through the ventilation openings.

• Position the Transmitter, Receiver and AC adapters to allow adequate

ventilation and prevent these components from overheating.

HEAT: The Monitor should be situated away from heat sources such as

radiators, heat registers, stoves, or other appliances that produce heat.

Also keep these components out of direct sunlight.

POWER SOURCE: The Monitor should be connected to a power supply

only of the type described in these operating instructions.

POWER CORD PROTECTION: The power supply cord should be routed so

that it is not likely to be walked on or pinched by items placed upon or

against it. Pay particular attention to the cord at the plug, convenience

receptacle, and at the point it exits from the Monitor. NOTE: Do not

place adapter under a window where a child might use it to step

on and reach something that might be dangerous.

• Check to make sure outlet plates are not unusually hot to the touch.

If they are, immediately unplug cords from these outlets. Check that

all outlet connections are in good condition so that adapter is not loose

or that no wiring is exposed. Have a qualified, licensed electrician

check the wiring as soon as possible.

OBJECT AND LIQUID ENTRY: Care should be taken so that objects

do not fall onto, and liquids are not spilled into the enclosure through

the openings.

DAMAGE REQUIRING SERVICE: The Monitor should be serviced by

qualified service personnel when:

A. The power supply cord has been damaged; or

B. Objects have fallen or liquid has been spilled into the product; or

C. The Monitor has been exposed to rain; or

D. The Monitor does not appear to operate normally or exhibits

a marked change in its performance; or

E. The Monitor has been dropped or the enclosure damaged.

To protect your privacy, always turn the monitor off when not in use.

Always remember that you are using public airwaves. Sound

may be broadcast to other receiving devices outside your home.

Conversations, even from rooms nearby, may be broadcast.

CAUTION!

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Safety1st Crystal Clear Babyfoon. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Safety1st. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Safety1st Crystal Clear Babyfoon in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Safety1st Babyfoons
Meer handleidingen voor Babyfoons

Veelgestelde vragen over Safety1st Crystal Clear Babyfoon

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.