Handleiding Salter 9034 Weegschaal

Handleiding

2.With a spirit level, carefully position the mirror unit on the wall at your desired height and mark a

horizontal pencil line on the wall from corner to corner along the bottom of the mirror unit (Fig 2).

3.With a spirit level mark a vertical centreline starting from the middle of the horizontal line you have

just drawn (Fig 3).

4. Mark the screw hole positions at 110mm up and 195mm apart (Fig 3).

5. Using a suitable drill, drill holes for the wall plugs (The wall plugs provided are suitable for solid

walls and require a 6 mm diameter hole. For hollow or other wall types – use a suitable alternative

fixing.).

6. Using a suitable screwdriver fit the screws, but do not fully tighten.

7.Temporarily position the mirror unit and adjust the screws until the mirror unit is held firmly against

the wall (You will need to remove the mirror unit to adjust the screws).

Tip: Look through the clock window to locate the screw heads.

8. Fit the mirror unit onto the screws and pull down to ensure it is correctly located the screws

sitting in the upper part of the keyholes.

9. Before storing the scale for the first time check the mirror unit is secure and level.

10.To remove the scale, reach behind the mirror and locate the vertical bar on the back of the scale

glass platform. Slide the scale to the edge of the mirror unit until you can firmly grasp the scale

platform. Place your other hand under the bottom edge of the scale platform and carefully remove.

To replace the scale simply slide the scale behind the mirror. The scale is guided into position and

should rest with the clock clearly visible through the mirror window.

CAUTION: For safety, the scale should only be removed from the mirror unit with clean dry hands.

GB

3

GB

2

Your quality Salter Mirror Scale has been designed especially for your convenience. The wall mounted

mirror unit provides a practical dual-purpose storage solution for your scale. When not in use the

scale becomes a useful clock.

Note: To fix the mirror unit to your bathroom wall you will need a drill, a screwdriver, a pencil and a

spirit level.

CAUTION: Please ensure the wall you wish to fit your mirror unit to does not have any cables,

pipes (or similar) behind it.

FIXING YOUR MIRROR UNIT TO THE WALL

1. Observing the above caution, choose a suitable location for the mirror unit ensuring the scale can

be comfortably accessed. Allow sufficient space around the mirror unit for removing and replacing

the scale (Fig 1). The scale may be removed or replaced from either side.

Fig 1

Fig 2 Fig 3

9034_IB.qxd:Layout 1 28/4/09 16:58 Page 2

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Salter 9034 Weegschaal. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Salter. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Salter 9034 Weegschaal in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Salter Weegschalen
Meer handleidingen voor Weegschalen

Veelgestelde vragen over Salter 9034 Weegschaal

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.