Connect the USB device to the USB port on the
front panel of the product.
Press the FUNCTION button to select USB.
USB appears on the display screen and then
disappears.
Press the
_+
buttons to select Videos, Photos
or Music.
- Select a le to play.
Safe USB Removal
To prevent damage to the memory stored in the
USB device, perform safe removal before
disconnecting the USB cable.
Press the YELLOW(C) button.
- REMOVE will appear on the display.
Remove the USB cable.
NOTE
To listen to your music les with 5.1 channel
sound, you must set the Dolby Pro Logic II
mode to Matrix. (See page 35)
Remove the USB cable from the USB port
slowly. Otherwise, it may cause damage to the
USB port.
~
~
~
✎
`
`
While playing CD-DA (Compact Disc Digital Audio)
using the USB Recording function or listening to the FM
radio or receiving audio source from an external device,
you can record the audio source in the USB memory.
Ex) USB recording of CD-DA audio contents
Connect the USB device to your product.
Insert the CD-DA disc into the CD tray.
Press the USB REC button on the remote control.
To start ripping the current track, press
the USB REC button on the remote control while the
system is playing a track or stopped temporarily.
To record the entire CD, press and hold the USB
REC button on the remote control.
- "FULL CD RIPPING" appears on the display and
recording starts.
Press the STOP (@) button to stop recording.
When USB recording of a CD is completed, you
will nd a new folder named “RECORDING” in the
USB drive. The contents will be saved in the folder
in the MP3 format.
When USB recording of FM radio or AUX source is
completed, you will nd a new folder named
“TUNER RECORDING or AUX RECORDING” in the
USB drive. The contents will be saved in the folder
in the MP3 format.
NOTE
Do not disconnect the USB connection or the power cable
during the USB Recording. Otherwise, it may cause damage
to the data.
To stop USB Recording, press the STOP button and
disconnect the USB device after the system stops playing
the CD completely.
If you disconnect the USB connection during the USB
Recording, the system will turn off and you will not be able
to delete the recorded le.
If you connect the USB device to the system while it is playing
a CD, the system stops temporarily and will play again.
DTS-CDs cannot be recorded.
If the recording duration is less than 5 seconds, a recording
le may not be created.
USB Recording works only if the USB device is formatted in
the FAT le system. (The NTFS le system is not supported.)
The audio signal will not be output during USB recording of
the CD.
When HDMI AUDIO is set to On, the USB Recording
function is not supported.
Do not insert the MIC while CD Ripping.
~
~
~
~
✎
`
`
`
`
`
`
`
`
`
Advanced Functions
Praat mee over dit product
Laat hier weten wat jij vindt van de Samsung HT-D450K Home cinema set. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.