8
1. Conventional Use
The equipment may only be used for the purpose as set forth in the catalogue and in the tech-
nical descriptions which means for ultrasonic cleaning as described in this instruction, and only
in conjunction with external devices and components which are recommended or approved by
Schalltec. Any other use of the equipment is considered to be non conventional.
In case of non conventional use, Schalltec will not be liable for possible damages and will not war-
rant for the correct and functional work of the components. Part of the conventional use is also
the observance of all information given in the operating manual. To this attention is drawn by the
sign on the type plate. The correct and safe operation of the equipment implies appropriate
transportation, storage, installation and assembly as well as careful handling and maintenance.
2. Non Conventional Use
In case of non conventional use of the equipment danger for life and limb as well as danger for
property may occur. Therefore a non conventional use is prohibited. In case of non conventional
use Schalltec will not be liable for possible damages and will not warrant for the correct and
functionally work of the components. In order to avoid non conventional use of the ultrasound
cleaning equipment the following directions are to be considered:
• The equipment may only be operated with the voltage printed on the type plate on the back-
side/ bottom side of the housing (shockproof socket).
• No flammable or aggressive chemicals (i.e. acids etc.) must be used for operation of the equip-
ment. If necessary, use glass container EM 50 DG.
• During operation do not touch the liquid.
• In case of transportation damage, don`t connect the equipment with main source.
• Do not clean creatures (i.e. finger nails, animals etc.) in the equipment.
• The equipment must only be operated with the correct level of water (water till mark, approx.
1 cm below upper brim). This must be controlled if equipment is operated for a longer time.
• Strongly contaminated goods shall be positioned in the equipment with the contaminated
side to the bottom – do not staple goods.
• The goods to be cleaned must not be positioned directly onto the bottom of the tub –
use the basket.
• If the equipment is operated for a longer time, do not stay longer than 4 hours within 1 m
distance to the equipment.
• The equipment must only be operated indoor and within a dry environment.
• It is normal, that the upper brims warm up at longer operation.
• Before emptying the tub, the power connector must be disconnected from the main source.
• An improper usage (heating without ultrasound) leads to a discoloration of the inner tank.
Important: The water can be strongly heated by the formation of ultrasound.
An improper usage (heating without ultrasound) leads to a discoloration of the inner
tank and the heating could be destroyed. Please use the heating just in combination
with ultrasound.
3. Operating Instruction
Check the specification table for the correct operating requirements (located on the back of
the unit).
Startup
Before connecting power, put the unit on a stable and flat working surface. Add water to tank,
suitable to completely immerse the items to be cleaned. Connect the power cable on the back of
the device and make sure the cable is plugged into the power socket. Switch the „main switch“ to
„1“ to turn on the device. The tempurature can be set before. Put your parts inside the basket and
turn the knob clockwise to set the time.
Praat mee over dit product
Laat hier weten wat jij vindt van de Schalltec S20 Ultrasoon reiniger. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.