Handleiding SentrySafe SFW123BTC Kluis

Handleiding

Your SentrySafe Product

Your SentrySafe product has a number of features to keep your

important documents and valuables protected including:

Water Protection UL Classified

Fire Protection

Digital Media

Protection

Preparing Your Safe for First Time Use

1

2

Slide out the battery drawer on the side

of the keypad. Insert 4 AAA alkaline

batteries (not included). DO NOT use

rechargeable batteries or any other

type of non-alkaline battery.

Do not mix old and new batteries.

Do not mix alkaline and standard batteries.

Slide battery drawer back into keypad until it clicks into place.

Using Your Safe

Enter the 5 digit factory code found on the back of this

owner’s manual.

Turn handle downward to open safe.

IMPORTANT: Test your code several times before putting

valuables inside.

IMPORTANT: If you exert too much force on the handle,

the handle will move without moving the bolts. When this

happens, you will hear a ’click.’ DO NOT be alarmed.

This feature is designed to protect the bolts from being

overpowered by force. Simply exert force in the opposite

direction (lifting up) until the handle clicks back

into place.

Thank you for choosing SentrySafe to store all your important documents and valuables.

We hope that this product will help you stay organized and provide you with the peace-of-mind of knowing the things most important to you are protected.

Water/Fire-Resistant Digital Safe with Fingerprint Scanner

3

4

Using Your SentrySafe

The digital lock on your safe comes with two flexible solutions

for entry: a digital keypad and fingerprint scanner. You will

be able to program two 5 digit codes in addition to the factory

code found on the back of this owner’s manual. The fingerprint

scanner can also be programmed for up to two users, with two

fingerprints per user.

NOTE: To add or delete a secondary user’s fingerprint, you must

have previously programmed a 5 digit primary user code.

NOTE: Factory code cannot be deleted.

Programming Digital

Keypad Entry

NOTE: Green light will blink to indicate the safe is in

program mode.

To Add a Primary User Code

Only 1 primary user code can be programmed at a time.

1

2

Press: “P”

Enter the 5 digit “FACTORY CODE”

(found on the back of this owner’s manual).

Press a 5 digit primary user code you have

chosen for your safe

3

Deleting a Primary User Code

1

2

Press: “P”

Enter the 5 digit “FACTORY CODE”

(found on the back of this owner’s manual).

Press: “0” –“0” –“0” –“0” –“0”

NOTE: The electronic lock will NOT indicate that it has

deleted the user code—please test code to make sure it

has been deleted.

NOTE: A primary user code is necessary to adding/deleting

a secondary user code/fingerprint.

3

Programming the Secondary Code

Only 1 secondary user code can be programmed at a time.

1

2

Press: “P”

Enter your programmed 5 digit primary user code.

Press a personal 5 digit secondary user code.

3

1

2

Press: “P”

Enter your programmed 5 digit primary user code.

Press: “0” –“0” –“0” –“0” –“0”

NOTE: The electronic lock will NOT indicate that it has

deleted the user code—please test code to make sure it

has been deleted.

3

Deleting a Secondary Code

Deleting a Primary Fingerprint User

1

2

Press: “P”

Enter the 5 digit “FACTORY CODE”

(found on the back of this owner’s manual).

Swipe any fingerprint once.

Press: “C”

NOTE: The electronic lock will NOT indicate that it has

deleted the user’s fingerprint—please test to make sure

it has been deleted.

NOTE: This will delete both fingerprints for this user.

3

4

Programming Your

Fingerprint Scanner

NOTE: Green light will blink to indicate

the safe is in program mode.

NOTE: Each user will have the ability

to program two fingerprints.

NOTE: Turning the keypad sound off

may make it more difficult to use

fingerprint scanner as a single beep

indicates your finger has been scanned.

To Add a Primary Fingerprint User

1

2

Press: “P”

Enter the 5 digit “FACTORY CODE”

(found on the back of this owner’s manual).

NOTE: Blue light will blink to indicate the fingerprint

sensor is ready to scan a new fingerprint.

Swipe the first finger 5-10 times.

Between each finger swipe you should hear a single beep

to indicate the fingerprint was scanned.

When the safe has registered the first fingerprint the green

indicator light will blink 3 times and you will hear

3 beeps.

To register a second fingerprint for this user – immediately

repeat steps 3 & 4 with a second finger for this user.

-OR-

If you would like to program only one finger

press “C”.

3

4

5

• Do not choose a finger with a cut or scar.

• Make sure hands are clean and dry before programming or

operating the fingerprint scanner.

• For optimal performance, clean the fingerprint sensor periodically

with a dry, lint-free cloth.

• The fingerprint sensor may not work well when cold.

Your Digital

Fingerprint Lock

Tips for Using Your

Fingerprint Scanner

Dual Key Lock

IMPORTANT: A dual key lock option is included

in your safe. Using this key can disable/enable

entry into the safe. This is NOT an override key.

Key must be in horizontal position to access safe.

English

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je SentrySafe SFW123BTC Kluis. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met SentrySafe. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van SentrySafe SFW123BTC Kluis in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor SentrySafe Kluizen
Meer handleidingen voor Kluizen

Veelgestelde vragen over SentrySafe SFW123BTC Kluis

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.