Handleiding Shop Fox W1873 Schaafmachine

Handleiding

-11-

Model W1873/W1874 (For Machines Mfd. Since 10/20)

SAFETY

WEARING PROPER APPAREL. Do not wear

clothing, apparel, or jewelry that can become

entangled in moving parts. Always tie back

or cover long hair. Wear non-slip footwear to

avoid accidental slips, which could cause loss

of workpiece control.

HAZARDOUS

DUST. Dust created while using

machinery may cause cancer, birth defects,

or long-term respiratory damage. Be aware of

dust hazards associated with each workpiece

material, and always wear a NIOSH-approved

respirator to reduce your risk.

HEARING PROTECTION.

Always wear hearing

protection when operating or observing

loud machinery. Extended exposure to this

noise without hearing protection can cause

permanent hearing loss.

REMOVE ADJUSTING TOOLS.

Tools left on

machinery can become dangerous projectiles

upon startup. Never leave chuck keys,

wrenches, or any other tools on machine.

Always verify removal before starting!

INTENDED USAGE.

Only use machine for its

intended purpose—never make modifications

without prior approval from Woodstock

International. Modifying machine or using

it differently than intended will void the

warranty and may result in malfunction or

mechanical failure that leads to serious

personal injury or death!

AWKWARD POSITIONS.

Keep proper footing and

balance at all times when operating machine.

Do not overreach! Avoid awkward hand

positions that make workpiece control difficult

or increase the risk of accidental injury.

CHILDREN & BYSTANDERS.

Keep children and

bystanders at a safe distance from the work

area. Stop using machine if they become a

distraction.

GUARDS & COVERS.

Guards and covers reduce

accidental contact with moving parts or flying

debris—make sure they are properly installed,

undamaged, and working correctly.

FORCING MACHINERY. Do not force machine. It

will do the job safer and better at the rate for

which it was designed.

NEVER STAND ON MACHINE. Serious injury may

occur if machine is tipped or if the cutting

tool is unintentionally contacted.

STABLE MACHINE. Unexpected movement during

operation greatly increases risk of injury or

loss of control. Before starting, verify machine

is stable and mobile base (if used) is locked.

USE RECOMMENDED ACCESSORIES. Consult

this owner’s manual or the manufacturer for

recommended accessories. Using improper

accessories will increase risk of serious injury.

UNATTENDED OPERATION. To reduce the risk

of accidental injury, turn machine OFF and

ensure all moving parts completely stop

before walking away. Never leave machine

running while unattended.

MAINTAIN WITH CARE. Follow all maintenance

instructions and lubrication schedules to

keep machine in good working condition. A

machine that is improperly maintained could

malfunction, leading to serious personal injury

or death.

CHECK DAMAGED PARTS. Regularly inspect

machine for any condition that may affect

safe operation. Immediately repair or replace

damaged or mis-adjusted parts before

operating machine.

MAINTAIN POWER CORDS. When disconnecting

cord-connected machines from power, grab

and pull the plug—NOT the cord. Pulling the

cord may damage the wires inside, resulting

in a short. Do not handle cord/plug with wet

hands. Avoid cord damage by keeping it away

from heated surfaces, high traffic areas, harsh

chemicals, and wet/damp locations.

EXPERIENCING DIFFICULTIES. If at any time

you experience difficulties performing the

intended operation, stop using the machine!

Contact Technical Support at (360) 734-3482.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Shop Fox W1873 Schaafmachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Shop Fox. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Shop Fox W1873 Schaafmachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Shop Fox Schaafmachines
Meer handleidingen voor Schaafmachines

Veelgestelde vragen over Shop Fox W1873 Schaafmachine

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Shop Fox W1874 Schaafmachine

Handleiding

Shop Fox W1864 Schaafmachine

Handleiding

Shop Fox W1862 Schaafmachine

Handleiding

Shop Fox G0546 Schaafmachine

Handleiding

Shop Fox W1877 Schaafmachine

Handleiding

Grizzly G9003 Schaafmachine

Handleiding

Einhell TC-SP 204 Schaafmachine

Handleiding

Grizzly G0889 Schaafmachine

Gerelateerde categorieën