Handleiding Siemens HM778GMB1B Oven

Handleiding

en Basic operation

14

8.3 Starting the operation

You must start each operation.

ATTENTION!

If there is water on the cooking compartment floor

when operating the appliance at temperatures above

120°C, this will damage the enamel.

▶ Do not use the appliance if there is water on the

cooking compartment floor.

▶ Wipe away any water on the cooking compartment

floor before operation.

▶

Use "Start" to start the operation.

a The settings appear on the display.

8.4 Interrupting the operation

You can interrupt the operation and then continue

again.

1.

To interrupt the operation, press "Stop".

2.

To continue the operation, press "Start".

8.5 Setting an operating mode

After you have switched on the appliance, the menu

appears on the display.

1.

To scroll through the various selection options,

swipe to the left or right on the display.

2.

To select a function, press the corresponding tile.

a Depending on the function, possible adjustment val-

ues or other tiles are available for selection.

3.

If required, press on another tile.

4.

To change the adjustment values:

‒ Swipe over the blue adjustment line or push the

adjustment line to the appropriate point.

‒ Or press

and enter the value directly via the

number field that appears.

5.

Use "Start" to start the operation.

6.

If the operation is ended:

‒ If required, you can select other settings and re-

start the operation.

‒ When the food is ready, use to switch the ap-

pliance off.

Tip:You can save your settings as "Favourites" and

use these again.

→"Favourites", Page22

8.6 Setting the type of heating and the

temperature

1.

Press "Types of heating".

2.

Press the type of heating that you want to use.

3.

Set the temperature using the adjustment line or dir-

ectly via the number field

⁠.

If required, you can implement additional settings:

– →"Rapid heating", Page15

– →"Time-setting options", Page15

– →"Microwave", Page16

– →"Ventilation function 'Crisp Finish'", Page18

– →"Meat probe", Page19

4.

Use "Start" to start the operation.

a The appliance starts heating.

a The adjustment values and how long the appliance

has already been in operation are shown on the dis-

play.

5.

When the food is ready, use

to switch the appli-

ance off.

Note:The most suitable type of heating for your food

can be found in the type of heating description.

→"Types of heating", Page10

Changing the type of heating

When you change the type of heating, the other set-

tings are also reset.

1.

Press "Stop".

2.

Press

⁠.

3.

Press the type of heating that you want to use.

4.

Reset the operation and use "Start" to start.

Changing the temperature

Once the operation has started, you can change the

temperature at any time.

1.

Press the temperature.

2.

Change the temperature using the adjustment line

or enter it directly via the number field

⁠.

3.

Press "Apply".

8.7 Displaying information

In most cases, you can call up information about the

function that you have just started. The appliance auto-

matically displays certain information, e.g. to ask you to

do/confirm something or to issue a warning.

1.

Press

⁠.

a If information is available, this is displayed for a few

seconds.

2.

If there is a lot of content, swipe down.

3.

If required, close the notification using ⁠.

8.8 Sabbath-compliant use

If you want to operate your appliance so that it is Sab-

bath-compliant, use the time-setting options and

change the basic setting for the lighting.

Note:If you open the appliance door during operation,

the appliance stops heating. When you close the appli-

ance door, the appliance continues to heat again. To

operate your appliance so that it is Sabbath-compliant,

do not open the appliance door until after operation.

1.

Change the "Lighting" basic setting to "Always off".

→"Basic settings", Page23

This will ensure that the light in the cooking com-

partment is always off while the appliance is in oper-

ation and when you open the appliance door.

2.

Set the required operating mode.

→"Setting an operating mode", Page14

→"Setting the type of heating and the temperature",

Page14

3.

Set the required cooking time depending on the op-

erating mode.

→"Setting the cooking time", Page15

→"Time-setting options", Page15

4.

Use "End time" to set the time at which the opera-

tion should end.

→"Setting the end time", Page15

→"Time-setting options", Page15

5.

Place the food in the cooking compartment before

the appliance starts to heat.

6.

Start the operation.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Siemens HM778GMB1B Oven. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Siemens. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Siemens HM778GMB1B Oven in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Siemens Ovens
Meer handleidingen voor Ovens

Veelgestelde vragen over Siemens HM778GMB1B Oven

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Siemens HB774G2B1S Oven

Handleiding

Siemens HB736G1B1B Oven

Handleiding

Siemens HB774A1B1 Oven

Handleiding

Siemens HM736GAB1 Oven

Handleiding

Siemens HB778GNB1M Oven

Handleiding

Siemens HR776G1B1B Oven

Handleiding

Siemens HB578GES7 Oven

Handleiding

Siemens CS936G1B1 Oven

Gerelateerde categorieën