Handleiding Siemens WD14H320GB Was-droog combinatie

Handleiding

8

Drying table

Cottons/Coloureds (textiles made of cotton or linen such as underwear, T-shirts, sweaters, trousers and kitchen towels)

Dry weight in kg <0,5 0,5ɛ1,0 1,0ɛ2,0 2,0ɛ3,0 3,0ɛ4,0 ɛ0,25 ɛ0,5 ɛ1,5 ɛ2,5

Estimated drying time in minutes Selectable drying time in minutes

Cupboard dry

< 60 60ɛ80 80ɛ120 120ɛ160 160ɛ180

30 60 90 120

< 65 65ɛ85 85ɛ130 130ɛ165 165ɛ180

Recommended programme

Intensive Dry Õc( )

Intensive Dry Õ (time)

Quilt/Terry towel (big or thick textiles made of cotton such as terry towels, bed sheets, table cloths, jeans and workwear)

Dry weight in kg

<0,5 0,5ɛ1,0 1,0ɛ2,0 2,0ɛ3,0 3,0ɛ4,0 ɛ0,25 ɛ0,5 ɛ1,0 ɛ2,0

Estimated drying time in minutes Selectable drying time in minutes

Cupboard dry

< 60 60ɛ75 75ɛ110 110ɛ150 150ɛ180

30 60 90 120

< 65 65ɛ90 90ɛ140 140ɛ170 170ɛ180

Recommended programme

Intensive Dry Õc( )

Intensive Dry Õ (time)

Easy-Care (textiles made of synthetic or mixed fibres such as shirts, sportswear and delicate garments)

Dry weight in kg <0,5 0,5ɛ1,0 1,0ɛ2,0 2,0ɛ2,5 ɛ0,25 ɛ0,5 ɛ1,0 ɛ1,5

Estimated drying time in minutes Selectable drying time in minutes

Cupboard dry

<65 65ɛ100 100ɛ150 150ɛ175

30 60 90 120

< 80 80ɛ110 110ɛ180 ɛ180

Recommended programme Gentle Dry : (auto) Gentle Dry :c (time)

 Times are approximate and refer to a standard load, a spin programme and an ambient temperature.

 The maximum selectable drying time (time dry) is 120 minutes, if the load of laundry to be dried is more than 2.5 kg, please select the

auto dry function. Auto dry is recommended for achieving good drying results and saving energy. The 15 minute time dry programme

is for cooling down laundry.

Consumption values

Programme Option Load

Electricity

consumption***

Water ***

Programme

duration***

Cotton cold - 7,0 kg 0,25 kWh 77 l

2½ hrs

Cotton 20 °C - 7,0 kg 0,30 kWh 77 l 2½ hrs

Cotton 40 °C ** - 7,0 kg 0,70 kWh 77 l 2½ hrs

Cotton 60 °C - 7,0 kg 1,30 kWh 77 l 2½ hrs

Cotton 90 °C - 7,0 kg 2,00 kWh 85 l

2½hrs

Easy-Care 40 °C ** - 3,5 kg 0,60 kWh 60 l 1¾ hrs

Mixed Fabrics 40 °C - 3,5 kg 0,55 kWh 52 l 1¼ hrs

Delicates/Silk 30 °C - 2.0 kg 0.20 kWh 30 l

¾ hrs

d Wool 30 °C - 2,0 kg 0.20 kWh 40 l

¾ hrs

Cotton Eco 60 °C* - 7,0 kg 1,22 kWh 48 l 2¾ hrs

Cotton Eco 60 °C +

Intensive Dry*

-

7,0/3,5 kg

5,67 kWh 89 l

8 hrs

* Programme setting for testing and energy labelling in accordance with EN50229, EU directive 96/60/EC. For the washing cycle,

please select Cotton Eco with default settings. For the drying cycle, please select Intensive Dry with the option.

** Programme setting for testing according to valid version of EN60456.

Note for comparative testing: when using the test programmes, wash using the specified load amount and the maximum spin speed.

*** The values deviate from the indicated values depending on water pressure, water hardness, and inlet temperature, ambient tempera-

ture, type, amount and degree of soiling of the laundry, detergent used, fluctuations in the power supply and selected additional func-

tions.

9

Display and option buttons

 

ʑ

Display symbols

ʑ

Display information

In the standby mode, the

following information for the

selected programme will be

shown alternately in the display:

the programme duration in

minutes, the maximum load

recommendation in kg, the

default setting for the

temperature in °C and the

default setting for the spin speed

in rpm.

* Example of display may vary

depending on selections.

ʑ

Option buttons

You can change the spin speed and temperature even while the selected programme is running.

The effects depend on how far along the programme has progressed.

°C (Temp.)

You can change the indicated washing temperature. The maximum washing temperature that can

be selected depends on the programme that has been selected. aPage 7

 (Spin)

You can change the indicated spin speed. The maximum spin speed which can be selected

depends on the selected programme. If is selected, the load is held in the rinsing water.

(Finish in)

When you select a programme, the respective programme duration is displayed. You can delay

the start of the programme before it begins. The finish-in time indicates when the programme will

be finished. It can be set in hourly increments up to a maximum of 24 hours.

Press and hold the 

(Finish in) button until the required number of hours is shown (h=hour).

Select  Start/Reload, the door is locked.

t Washing: On if the washing cycle is running.

mcRinse: On if the rinse cycle is running.

Spin: On if the spin cycle is active.

9cDrying: On if the drying cycle is active.

küOverdosage: Foam detected. Maybe too much detergent.

s Childproof lock: On if the childproof lock is activated.

Activate/deactivate the childproof lock aPage 10

rcDoor: On if door can be opened.

kg, *:Maximum load recommendation in kg for the

selected washing/drying programme. aPage 7, Programme

Time, e.g. *: Remaining time of programme, or

*:Finish in time defined by user. aPage 9

ॕ

, e.g. ±¯ॕ : The temperature which has been set for the

selected programme.

Dry, drying mode and drying time:

: Cupboard dry mode. Dries the items until they are only

slightly damp. The items can be folded or hung in a cupboard

to finish drying. Suitable for normal fabrics which do not need

ironing.

: Extra dry mode. Dries the items until they are

completely dry. Suitable for thick or quilted fabrics, such as

towels and bathrobes, which do not need ironing.

: The drying programme is off.

*: Time dry, drying time defined manually. aPage 10,

:Õ (Dry) button

: On if the door can be opened when the programme was

paused.

: On if the door cannot be opened when the programme

was paused.

: End of programme, or

:End of programme with the setting.

*:

Set the volume of the signals. aPage 10

*:



Information on the display. aPage 11

10

:Õü(Dry)

You can activate, deactivate and set the drying function by touching this option button. Mode

of washing and drying without interruption is auto dry; when the single drying programme

is selected, you can choose auto dry, or time dry with a desired drying time. Set the drying time

arefer to page 8, Drying table

ʑ

Additional functions



See also Programme overview aPage 7

Select or cancel the additional function with the z Quick Wash or h Extra Rinse button:

– The indicator lights of the buttons come on if additional functions are active.

– Switching off the additional option: touch the button again. The indicator light goes out.

– You can select two additional functions at the same time for some programmes.

Quick Wash z

Shorten the washing time. For slightly soiled items.

Extra Rinse h

Additional rinse cycles, extended washing time. For regions with

very soft water or for further improvement of the rinsing result.

ʑ

 Start/Reload

For starting or pausing the washing/drying programme.

ʑ

Hibernate mode

The back light of the display will go out if the machine is not operated for 5 minutes before the

programme starts, when the finish-in time starts counting down, or the programme ends. Touch any

button first to activate the back light, then you can operate the machine.

ʑ

Signal volume (for button signal and information signal)

ʑ

Childproof lock s Programme will not be changed by accidental operation.

To activate the childproof lock:

– After the programme starts or the finish-in time is activated aPage 9, press and hold the

(Finish in) button for 5 seconds;

– Release when the s symbol lights up. If button signal is on, an acoustic signal will be heard.

When the programme ends, the Start/Reload indicator remains on to remind you to deactivate the

childproof lock.

To deactivate the childproof lock:

– Touch the (Finish in) button until the s symbol turns off.

– Release the button.

s symbol flashes if the programme has been changed while childproof lock is activated.

If the childproof lock is deactivated while the programme selector is in a different position from when

the childproof lock was activated, the programme which is currently running be halted.

Set to for

at least

5 seconds

1 step

clockwise

Touch and

hold the °C

button

1 step

clockwise

Button signals Information signals

Touch the 

button and set

the volume

*

1 step

clockwise

Set to 

direct

*If required, set repeatedly.

1. Activate the

setting mode for

the signal volume

2. Set volume for ...

Release

the °C

button.

+

Touch the 

button and set

the volume

*

Additional functions and Individual settings

11



Please close the door immediately because the water level is rising.

In the pause status, and are displayed alternately.



In pause status, is flashing if the spin speed is high, please just wait to let the spin speed

drop down. If is continuously display in pause status then it means door is locked due

to safety reasons(water level and/or temperature are too high). For the washing

programme: If you need to open the door, wait for the temperature to drop or drain the water

(e.g. select the Spin or Empty programme).

For the drying programme: If you need to open the door, wait for the temperature drop or

set the time dry programme for 15 minutes to allow the laundry to cool down.

The door cannot be locked/unlocked due to the high temperature of the door lock. Keep the

machine switched on for about 1 minute. Then the machine can be locked/unlocked again.

The door cannot be opened after the drying programme because the temperature is too

high. The cooling process will continue until this display disappears and the door can be

opened. If the laundry needs to be removed as soon as possible, select the Intensive Dry

Õü

programme and set the time dry function to 15 minutes to allow the laundry to cool down.

No water supply during washing

Tap turned on? Supply hose kinked or blocked?

Inlet filter blocked? Clean the filter aInstallation and maintenance instructions, Page 8

No water supply during drying

Tap turned on? Inlet filter blocked? Cooling water valve faulty?

Clean the drain pump aInstallation and maintenance instructions, Page 8;

outlet pipe/drainage hose blocked.



Flashing: The machine detected an imbalance in the drum that cannot be adjusted. The

maximum spin speed cannot be reached in order to protect the machine. The washing

solution will not be removed completely after spinning, and the subsequent drying

programme is automatically stopped.

If the drying cycle stops and ¤ flashes on the display, the cooling programme will keep

running automatically until ¤ disappears and the door can be opened.

- Wash or dry small and large items of laundry together.

After the auto drying cycle, the symbols and §Ê are displayed alternately, suggesting that

the drying result may not be satisfactory.

– : the amount of laundry is too much. : the amount of laundry is too little.

Other displays

Switch off the appliance, wait 5 seconds and switch it back on.

If the display appears again, call customer service.

Safety instructions

– Read and follow the operating instructions as well as the installation and maintenance instructions

and all other information enclosed with the washer dryer.

– Retain documents for subsequent use.

Risk of electric shock

– Never pull out the mains plug by pulling on the power cord.

– Never insert/pull out the mains plug with wet hands.

Risk of death

For worn-out appliances:

– Pull out the mains plug.

– Sever the power cord and discard together with the plug.

– Destroy the lock on the washer dryer door. This will prevent children from

locking themselves in and putting their lives at risk.

Risk of suffocation

– Keep packaging, plastic film and packaging parts out of the reach of

children.

Risk of poisoning

– Keep detergents and care products out of the reach of children.

Risk of explosion

– Items of laundry pretreated with cleaning agents containing solvents, e.g.

stain remover/cleaning solvents may lead to an explosion after being loaded

into the washer dryer. Rinse items of laundry thoroughly by hand

beforehand.

Risk of injury

– Washer dryer door may become very hot.

– Take care when draining hot detergent solution.

– Do not climb onto the washer dryer.

– Do not lean on the washer dryer door when it is open.

– Do not touch the drum in case it is still spinning.

– Ensure that the pump cap is screwed on while the machine is running to

prevent water from leaking out and coming into contact with moving pump

parts.

– If a drying programme was interrupted, the washer dryer and the laundry

may be very hot, select Intensive Dry

Õ or Gentle Dry :üand set the time

dry programme to 15 minutes to allow the laundry to cool down, then

remove the laundry.

Information on the display

12

What to do if ...

ʑ

Water is leaking out.

– Fit/refit the drainage hose correctly.

– Tighten the screw connection of the supply hose.

ʑ

There is no water supply.

Detergent is not dispensed.

– Start/Reload not selected?

– Tap not turned on?

– Filter blocked? Clean the filter. aInstallation and maintenance

instructions, Page 8

– Supply hose kinked or trapped?

– There is water in the drum already.

ʑ

Washer dryer door cannot be

opened.

– Safety function active. Programme stopped? aPage 5

– (no final spin/drain) selected? aPage 5

– Can be opened by emergency release only. aPage 13

– Childproof lock activated? Deactivate it aPage 10

ʑ

Programme does not start.

– Start/Reload or 

(Finish in) selected?

– Washer dryer door closed properly?

ʑ

Detergent solution is not

drained.

– Clean the drain pump. aInstallation and maintenance

instructions, Page 8

– Clean the waste pipe and/or drainage hose.

ʑ

Water not visible in the drum.

– Not a fault - water below the visible area.

ʑ

The spin result is not

satisfactory.

– Wash small and large items of laundry together.

– Selected speed too low? aPage 9

ʑ

The spin cycle performs

several times.

– This is not a fault – the unbalanced load detection system

adjusts the imbalance.

ʑ

Compartment ~ is not rinsed

out completely.

– Remove the insert. Clean the detergent drawer and insert it

again.

aInstallation and maintenance instructions, Page 7

ʑ

Odour forms in the washer

dryer.

– Run the Fluff Clean cold programme without laundry.

– Use standard detergents.

ʑ

Foam escapes from the

detergent drawer.

– Too much detergent used?

Mix 1 tablespoon of fabric softener with ½ litre of water and pour

this mixture into compartment II in the detergent drawer.

– Reduce the detergent dosage for the next wash cycle.

– Use commercially available low foam detergents and care

products which are suitable for use in the washer dryer.

ʑ

Excessive noise, vibrations

and "wandering" during the

spin cycle.

– Are the appliance's feet fixed?

Secure the appliance's feet. aInstallation and maintenance

instructions, Page 5

– Have the transport bolts been removed?

Remove the transport bolts. aInstallation and maintenance

instructions, Page 3

ʑ

Display panel/indicator lights

do not function while the

appliance is running.

– Power failure?

– Circuit breaker tripped? Reset the circuit breaker/change the

fuse.

– If the fault occurs repeatedly, call after-sales service.

ʑ

The programme sequence is

longer than usual.

– This is not a fault – the unbalanced load detection system

adjusts any imbalance by repeatedly distributing the laundry.

– Not a fault – the foam detection system is active; it adds an

additional rinse cycle.

ʑ

There are detergent residues

on the laundry.

– Occasionally, phosphate-free detergents contain water-insoluble

residues.

– Select Rinse or brush the laundry after washing.

ʑ

Spinning noise during drying.

– This is an innovative process called thermospinning to reduce

energy consumption during drying.

ʑ

Differently coloured fluff from

the previous drying cycle is

redeposited on the laundry in

the following washing cycle.

– Run the Fluff Clean cold programme without laundry to remove

fluff which has accumulated in the tub during tumble drying.

13

ʑ

Drying takes too long.

– According to the water cooling technology a higher water

temperature will result in lower drying performance and an

increased drying time.

– If dripping laundry is put inside the drum to dry directly or

laundry has not been spun well enough before drying, the drying

time will be longer.

– Run the Fluff Clean cold programme without laundry to remove

fluff which has accumulated in the tub and drying system.

ʑ

Drying programme does not

start.

– Drying programme not selected? aPage 10:

:Õ (Dry) option

button and Page 7: Programme overview

– Washer dryer door not closed properly?

– cflashes? Wash small and large items of laundry together.

– The pump is blocked. aInstallation and maintenance

instructions, Page 8: Clean the pump

ʑ

The drying result is not

satisfactory (laundry is not dry

enough).

– Water temperature is too high.

– The laundry has not been spun well enough before drying –

always set the highest selectable spin speed for all washing

programmes.

– Machine overloaded: please follow the load recommendation

in the programme table and on the load display, do not overload

the machine, as the maximum load for drying is lower than for

washing. Unload the machine after washing a maximum load of

laundry and separate the load into two drying cycles.

– The line voltage of the power supply is too low, too high, or

unstable.

– Thick multilayered textiles or textiles with thick fillings – these

textiles easily dry on the surface, but not inside. This drying

process may take longer. Please use time drying programmes

to dry these kinds of textiles completely.

ʑ

A small amount of water can

be seen dripping on the dried

load of laundry when the door

is opened.

– Opening the door quickly creates a suction effect which can pull

any remaining water drops from the drying system.

– Open the door slowly. Avoid jerking the door open.

ʑ

If you cannot correct a fault yourself or a repair is required:

– Turn the programme selector to  Off and disconnect the mains plug.

– Turn off the tap and call customer service.

Emergency release e.g. in the event of power failure

The programme will continue to run when the power is restored.

However, if the laundry has to be removed, the washing

machine door can be opened as follows:

Risk of scalding.

The detergent solution and laundry may be hot.

If possible, leave it to cool down.

Do not open the washer dryer door if water can be seen

through the glass.

– Set the programme selector to  Off and disconnect the mains

plug.

– Drain the detergent solution. aInstallation and maintenance

instructions, Page 8

– Pull the emergency release with a tool and release it.

The washer dryer door can then be opened.

What to do if ...

Operating instructions

WD14H320GB

en

Follow the safety

instructions on page 11.

Washer dryer

Read these instructions before switching on the

washer dryer. Also follow the separate Installation and

maintenance instructions.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Siemens WD14H320GB Was-droog combinatie. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Siemens. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Siemens WD14H320GB Was-droog combinatie in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Siemens Was-droog combinaties
Meer handleidingen voor Was-droog combinaties

Veelgestelde vragen over Siemens WD14H320GB Was-droog combinatie

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Siemens WN54C2A0NL Was-droog combinatie

Handleiding

Siemens WD14H540DN Was-droog combinatie

Handleiding

Siemens WD14U540ES Was-droog combinatie

Handleiding

Siemens WD4HU541GB Was-droog combinatie

Handleiding

Siemens WN44A1C0DN Was-droog combinatie

Handleiding

Siemens WD14H422GB Was-droog combinatie

Handleiding

Siemens WN34A100EU Was-droog combinatie

Handleiding

Siemens WN54G2A0DN Was-droog combinatie

Gerelateerde categorieën