Handleiding Siemens WD14H540DN Was-droog combinatie
Handleiding voor je Siemens WD14H540DN Was-droog combinatie nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 4 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.
Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.
Handleiding
Loading…
8
Drying table
Bomuld (Cottons) (textiles made of cotton or linen such as underwear, T-shirts, sweaters, trousers, kitchen towels)
Dry weight in kg
0,5ɛ1,0 1,0ɛ2,0 2,0ɛ3,0 3,0ɛ4,0
Dry weight in kg
ɛ0,5 ɛ1,0 ɛ2,0 ɛ2,5
Estimated
drying time
in minutes
Cupboard Dry 35ɛ50 50ɛ70 70ɛ95 95ɛ130
Selectable
drying time
in minutes
30 60 90 120Extra Dry 40ɛ60 60ɛ85 85ɛ115 115ɛ150
Light Dry 45ɛ65 65ɛ95 95ɛ130 130ɛ175
Recommended programm
Intensiv tørring (Intensive Dry)c(Auto) Intensiv tørring (Intensive Dry) (min)
Strygelet (Easy-Care) (textiles made of synthetic or mixed fibres such as shirts, sportswear, delicate garments)
Dry weight in kg 0,5ɛ1,0 1,0ɛ2,0 2,0ɛ2,5 Dry weight in kg
ɛ1,0 ɛ1,5 ɛ2,0
Estimated
drying time
in minutes
Cupboard Dry 35ɛ45 45ɛ65 65ɛ90 Selectable
drying time
in minutes
60 90 120Extra Dry 35ɛ55 55ɛ85 85ɛ125
Light Dry 40ɛ60 60ɛ95 95ɛ140
Recommended programm Skånetørring (Low Heat Dry)c(Auto) Skånetørring (Low Heat Dry) (min)
Times are approximate and refer to standard load, spin programme and environment temperature.
For terry towels or other large textile items ,the Auto Dry time maybe prolonged, and Extra Dry is recommended.
The maximum selectable drying time (Dry min) is 120 minutes, if the load of the laundry to be dried is more than 2.5 kg, please select
Auto Dry function. Auto Dry is recommended to achieve a good drying result and save energy. 15 minutes drying programme is for
cooling down the laundry.
Only Auto Dry can be used for washing and drying without interruption; when single drying programme is selected, you can choose
Auto Dry, or Dry min (timed drying) with desired drying time. Setting of drying function aPage 9
There are 3 kinds of drying target availbele for Auto Dry mode. You can select one by touching 9c(Dry) button
: Cupboard Dry: for daily laundry, can be worn as soon as the drying programme ends.
: Extra Dry: for heavy laundry, can be additionally dried to remove dampness in the cold season.
:Light Dry: for delicate laundry, must be hung out or ironed when the drying programme ends.
Consumption values
Programme Option Load
Electricity
consumption*** Water ***
Programme
duration
***
Bomuld (Cottons) 30 °C**
7 kg
0,29 kWh 74 l 2:35 h
Bomuld (Cottons) 40 °C**
7 kg
0,81 kWh 74 l 2:45 h
Bomuld (Cottons) 60 °C**
7 kg
1,49 kWh 74 l 2:45 h
Bomuld (Cottons) 60 °C**
ecoPerfect is activated
Rinse plus is deactivated
7 kg 0,91 kWh 51 l 3:40 h
Bomuld (Cottons) 90 °C
7 kg
2,20 kWh 84 l 2:35 h
Strygelet (Easy-Care) 40 °C**
ecoPerfect is activated 3,5 kg
0,53 kWh 55 l 1:43 h
Mix 40 °C**
3,5 kg
0,47 kWh 52 l 1:03 h
Finvask/Silke (Delicates/Silk) 30 °C
2 kg
0,14 kWh 29 l 0:39 h
dUld-/håndvask (Wool) cold
2 kg
0,02 kWh 42 l 0:36 h
dUld-/håndvask (Wool) 30 °C
2 kg
0,16 kWh 42 l 0:36 h
Intensiv tørring (Intensive Dry)
4 kg
2,55 kWh 3 l 2:30 h
Skånetørring (Low Heat Dry)
2,5 kg
1,55 kWh 3 l 2:00 h
Fnugskylning (Fluff Clean) cold
0,04 kWh 29 l 0:16 h
Bomuld (Cottons) 60 °C*+
Intensiv tørring ( : Cupboard Dry, 2cycles)*
ecoPerfect is activated*
Rinse plus is deactivated*
7/3,5 kg 4,76 kWh 57 l 8:08 h
* Programme setting for testing and energy labelling in accordance with EN50229, EU directive 96/60/EC.
** Programme setting for testing according to valid version of EN60456.
Note for comparative testing: to test using the test programmes, wash using the specified load amount and maximum spin speed.
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambiente temperature,
type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional functions.
9
Display and Option buttons
ʑ
Display symbols and information
* âExample of display may vary depends on
selections.
The back light of display light when
Programme running.
Before programme start, or finish in time
start counting down, or programme end, if
no operation within 5 min, the back light of
display will go out. Touch any button first to
activate the back light, then you can take
operation.
ʑ
Additional function Display see detailed information aPage 10
Additional function symbol displays when
this function is available for selected
programme and symbol goes out when this
function can not be selected anymore
during programme running.
ʑ
Option buttons
You can change the spin speed and temperature even while the selected programme is running. The
effects depend on the progress of the programme.
°C (Temp.) / (Spin)
You can change the indicated washing temperature and spin speed. The maximum washing
temperature and spin speed which can be selected depends on the programme that has been
chosen. If is selected, the load is held in the rinsing water.aPage 7
(Finish in)
When you select a programme, the respective programme duration is displayed. You can delay
the start of the programme before it begins. The finish-in time indicates when the programme will
be finished. It can be set in hour increments up to a maximum of 24 h.Press and hold the
(Finish in) button until the required number of hours is shown (h=hour).
Select (Start/Reload), the door is locked.
9c(Dry)
You can activate, deactivate and set the drying function by touching this button 9c(Dry). When
this function is activated, you can keep on touch this button 9c(Dry) to move the selection bar
below the symbols of Auto Dry target and shift the setting of Dry min(timed drying). Keep
on touch this button until the selection bar disappeared, this function is deactivated.
Programme progress symbols:
Prewash, tüWashing, müRinse, Spin, 9Drying,
Above symbols on when programme running in particular phase.
Cooling-down, Rotating during drying phase.
progress bar, Indicates progress when programme running or
indicates percentage of load to maximum of selected programme when door
is opened before programme starts. Flashing, if overload.
Machine state symbols:
xTap: On , if low water pressure. programmewill be extend.
Flashing , if tap not open or no water supply.
küOverdosage: On, if too much foam detected. Maybe too much detergent.
süChildproof lock: On, if childproof lock is activated.
Flashing, if there is misoperation.
Activate/deactivate childproof lock. aPage 10
rDoor: On if door can be opened.
Load recommendation display:
*, maximum load recommendation for selected programme
aPage 7, Programme overview
Remaining time and multi information display:
*: programme remaining time
*: Finish in time defined by user. aPage 9
: End of programme, or
:end of programme with the setting (without final spin)
: On if programme is in pause
: On if door can be opened when programme was paused
*:Information on the display. aPage 11
Additional function:
Stains, certain one stain can be selected by Û button
Blood, Cosmetic, Coffee, Tomato, Grass,
²
Wine
Rinse plus, default rinse cycles plus additionl selection
࣋࣋: Selection bar, on when the additional function is selected.
: Function frame, on when the additional function can be selected.
Drying mode, see information and setting aPage 8,9
Auto Dry, 3 drying targets can be selected as:
: Cupboard dry, : Extra dry, : Light dry
Dry min, 5 drying duration can be selected, e.g:
*: drying time defined manually.aPage 9, 9 (Dry)
10
ʑ
Additional functions
See also Programme overview aPage 7
Select the desired additional functions with the Ûü(Option) button, keep on touch this button until your
desired function frame flases and then activate the chosen function by touching the Ù(Set) button,
the selected bar appears below the frame, then the function is selected or touch the
Ù(Set) button again to deactivate this function. Repeat operation you can select more additional
functions which available for the selected programme. If no other action, function frame stops
flashing and comes on after several seconds. Additional function is selected sucessfully.
Stains
There are a total of 6 different stains to choose from. When this
function is selected, you can keep on touch the Ù(Set) button to
move the selection bar below the symbol of certain stain, then
this stain is selected.
hRinse plus
Additional rinse cycles, extended washing time. For areas with
very soft water or for further improvement of the rinsing result.
Select hRinse plus by Ûü(Option) button. Then touch Ù(Set)
button toâactivate the function, you can keep on touch this button
for desired rinse cycles (max. 3+3 cycles).
ispeedPerfect
Shorten the washing time. For slightly soiled items.
jecoPerfect
Extends the washing time for a more intensive washing ofâheavily
soiled items. save energy consumption.
wLess iron
Special spin sequence with subsequent fluffing. Gentle final
spin residual moisture in the laundry increased slightly.
ʑ
Start/Reload
For starting or pausing the washing/drying programme.
ʑ
Signal volume (for button signal and information signal)
ʑ
Childproof lock s Programme will not be changed by accidental operation.
To activate/deactivate the childproof lock:
After the programme starts or finish in time being activated aPage 9, press and hold the
(Finish in) button for 5 seconds.;
Release when the süsymbol lights up. If button signal is on, an acoustic signal will be heard.
When the programme ends, the (Start/Reload) indicator remains on to remind you to the
childproof lock.
Touch the (Finish in) button until the süsymbol turns off, the childproof lock is deactivated.
süsymbol flashes if the programme has been changed while childproof lock is activated. Ifâthe
childproof lock is deactivated while the programme selector is in a different position from when the
childproof lock was activated, the running programme will be halted.
ʑ
Drum interior light
Drum interior light is installed.It lights a while when machine door is opened or closed.
and it will go out after programme running for 10 seconds.
2. Set volume for ...
1. Activate setting
mode for signal
volume
Set to Fra
(Off)for at
least 5
seconds
1 step
clockwise
Touch °C
(Temp.) button
and hold
1 step
clockwise
Button signals Information signals
Touch
button and
set volume
*
1 step
clockwise
Set to Fra
(Off)
direct
*If required, set repeatedly.
Release the
°C (Temp.)
button.
+
Touch
button and
set volume
*
Additional functions and Individual settings
11
Please close the door immediately because of rising water level or high temperature
Door is locked due to safety reasons (water level and/or temperature are too high). For
washing programme: In pause status, and are displayed alternately. If you
need to open the door, wait for the temperature to drop or drain the water (e.g. select
Skyl/Centrifugering (Rinse/Spin) or Udpumpning (Empty) programme.
For drying programme: If you need to open the door, wait for the temperature to drop or
set 15 minutes time dry programme to cool down the laundry.
If comes up after the drying programme ends frequently:
Clean the cool air inlet filter. aInstallation and maintenance instructions, Page 9
Run the Fnugskylning (Fluff Clean)ü(cold) programme without laundry.
Door cannot be locked/unlocked due to high temperature of the door lock. Keep the
machine switched on for about 1 minute. Or switch off then switch on to any programme.
Then the machine can beâlocked/unlocked again.
Door cannot be opened due to the high temperature after the drying programme. The
cooling down process will continue until this display disappears and the door can be
opened.
üüü
x
Flashing (no water supply):
Tap turned on?
Inlet filter blocked? Clean filter aInstallation
and maintenance instructions, Page 8
Supply hose kinked or blocked?
On (low water pressure):
Only information. No influence on the
programme process. The programme
duration will be prolonged.
Clean drain pump aInstallation and maintenance instructions, Page 8;
outlet pipe/drainage hose blocked.
Hold the 9c(Dry) button for 3 seconds to clear this display.
Clean the cool air inlet filter. aInstallation and maintenance instructions, Page 9
Run the Fnugskylning (Fluff Clean)ü(cold) programme without laundry.
Laundry amount information. On when drying phase finished.
: Maybe small load for drying. : Maybe overload for drying.
other displays
Switch off the appliance, wait 5 seconds and switch it back on.
If the display appears again, call the customer service.
Safety instructions
Read and follow the operating and Installation and maintenance instructions and all other
information enclosed with the washer dryer.
Retain documents for subsequent use.
Risk of electric
shock
Never pull out the mains plug by tugging the power cord.
Never insert/pull out the mains plug with damp hands.
Risk of death
(For worn-out
appliances)
Pull out the mains plug.
Sever the power cord and discard together with the plug.
Destroy the lock on the washer dryer door. This will prevent children from
locking themselves in and risking their lives.
Risk of suffocation Keep packaging, plastic film and packaging parts out of the reach
ofâchildren.
Risk of poisioning Keep detergents and care products out of the reach of children.
Risk of explosion Items of laundry pretreated with cleaning agents containing solvents, e.g.
stain remover/cleaning solvents may lead to an explosion after being loaded
into the washer dryer.
First rinse items of laundry thoroughly by hand.
Risk of injury
Washer dryer door may become very hot.
Take care when draining hot detergent solution.
Do not climb onto the washer dryer.
Do not lean on the open washer dryer door.
Do not touch the drum in case it is still spinning.
Ensure that the pump cap is screwed on while the machine is running to
prevent the escape of water and contact with moving pump parts.
If a drying programme was interrupted, the washer dryer and laundry may be
very hot, select Intensiv tørring (Intensive Dry) or Skånetørring (Low Heat
Dry) and set 15 minutes programme to cool down the laundry, then remove
the laundry.
Information on the display
12
What to do if ...
ʑ
Water is leaking out. Fit/refit drainage hose correctly.
Tighten the screw connection of the supply hose.
ʑ
No water supply.
Detergent not dispensed.
(Start/Reload) not selected?
Tap not turned on?
Filter blocked? Clean the filter. aInstallation and maintenance
instructions, Page 8
Supply hose kinked or trapped?
ʑ
Washer dryer door cannot be
opened.
Safety function active. Programme stopped? aPage 5
(no final spin/drain) selected? aPage 5
Can be opened by emergency release only. aPage 13
ʑ
Programme does not start. (Start/Reload) or (Finish in) selected?
Washer dryer door closed properly?
ʑ
Detergent solution is not
drained.
Clean the drain pump. aInstallation and maintenance
instructions, Page 8
Clean waste pipe and/or drainage hose.
ʑ
Water not visible in the drum. Not a fault water below the visible area.
ʑ
Spin result not satisfactory. Wash small and large items of laundry together.
wLess iron selected? aPage 10
Speed selected too low? aPage 9
ʑ
Spin cycle performed several
times.
Not a fault unbalanced load detection system adjusts the
imbalance.
ʑ
Compartment ~ not rinsed
out completely.
Remove the insert. Clean detergent drawer and insert it again.
aInstallation and maintenance instructions, Page 7
ʑ
Odour formation in the
washer dryer.
Run the Fnugskylning (Fluff Clean) 90°C programme without
laundry.
Use standard detergents.
ʑ
Foam escapes from the
detergent drawer.
Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water and
pour into compartment II in the detergent drawer.
Reduce detergent dosage for the next wash cycle.
Use commercially available low foam detergents and care
products which are suitable for use in washer dryer.
ʑ
Excessive noise, vibrations
and wandering during spin
cycle.
Are the appliance feet fixed?
Secure the appliance feet. aInstallation and maintenance
instructions, Page 5
Transport bolts removed?
Remove transport bolts. aInstallation and maintenance
instructions, Page 3
ʑ
Display panel/light guide ring
do not function while the
appliance is running.
Power failure?
Circuit breaker tripped? Reset the circuit breaker/change
theâfuse.
If the fault occurs repeatedly, call the customer service.
ʑ
Programme sequence
longer than usual.
Not a fault unbalanced load detection system adjusts
imbalance by repeatedly distributing the laundry.
Not a fault foam detection system active adds an additional
rinse cycle.
ʑ
Detergent residues on the
laundry.
Occasionally, phosphate-free detergents contain water-
insoluble residues.
Select Skyl/Centrifugering (Rinse/Spin) or brush the laundry
after washing.
ʑ
Spinning noise during drying. This is an innovative process called thermospinning to reduce
energy consumption during drying.
ʑ
Differently coloured fluff is
redeposited on the laundry
Run the Fnugskylning (Fluff Clean) cold programme without
laundry inside to remove fluff accumulated in the tub during
tumble drying.
ʑ
Water inlet noise during
drying, Water tap symbol
isâflashing during drying.
The machine includes a self cleaning function to remove fluff
that is released from laundry during drying. This is done with
help of a small amount of tap water. Open the water tap
also during drying.
13
ʑ
Drying duration extended. According to the air cooling principle, higher environment
temperature will result in poor drying performance, so the
drying duration will be extended. Ensure a good ventilation
toâremove exhaust heat.
Cooling air inlet filter blocked? aInstallation and maintenance
instructions, Page 9: Clean the air inlet filter
Run the Fnugskylning (Fluff Clean) cold programme without
laundry toâremove fluff accumulated in the tub and drying
system.
ʑ
Drying programme does not
start.
Drying programme not selected? aPage 9: 9 (Dry) option
button and Page 7: Programme overview
Loading door not closed properly?
Pump is blocked. aInstallation and maintenance instructions,
Page 8: Clean the pump
ʑ
The drying result is not
satisfactory (laundry is not dry
enough).
Too high environmental temperature (above 30â°C) or bad
ventilation of the room, where the washer dryer is placed
ensure good ventilation to remove exhaust heat.
The laundry has not been spun well enough before drying
always set the highest selectable spin speed for all washing
programmes.
Machine overload: please follow the load recommendation
inâthe progamme table and load display, do not overload
machine, because of maximum load amount for drying is lower
than for washing unload the machine after washing with
maximum load for washing and separate the load into two
drying cycles.
The line voltage of the power supply is too low ( below 200âV)
ensure suitable power supply.
Cooling air inlet filter blocked? aInstallation and maintenance
instructions, Page 9: Clean the air inlet filter
Thick multilayered textiles or textiles with thick fillings these
textiles easily dry on the surface, but not inside. This
equalization process may take longer. Please use time drying
programs to completely dry these kinds of textiles.
ʑ
A small amount of water is
observed dripping on the
dried laundry load when the
door is opened.
Drying time is shortened with a small load. Some residual
moisture may remain in the drying system. Opening the door
quickly creates a suction effect which pulls moisture from the
drying system.
Open the door slowly. Avoid jerking the door open.
ʑ
Drum interior light cant light. Call the customer service.
ʑ
If you cannot correct a fault yourself or a repair is required:
Turn the programme selector to Fra (Off) and pull the mains plug out of the socket.
Turn off the tap and call customer service.
Emergency release e.g. in the event of power failure
The programme will continue to run when the power is restored. However,
if the laundry has to be removed, the washer dryer door can be opened
as follows:
Risk of scalding.
The detergent solution and laundry may be hot.
If possible, leave it to cool down.
Do not open the washer dryer door if water can be seen through the
glass.
Set the programme selector to Fra (Off) and disconnect the mains plug.
Drain the detergent solution. aInstallation and maintenance instructions,
Page 8
Pull the emergency release with a tool and release.
The washer dryer door can then be opened.
What to do if ...
en
Read these instructions before switching on
the washer dryer. Also follow the separate
Installation and maintenance instructions.
Follow the safety
instructions on Page 11.
Washer dryer
Operating instructions
WD14H540DN
Loading…
Meer over deze handleiding
We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Siemens WD14H540DN Was-droog combinatie. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Siemens. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Siemens WD14H540DN Was-droog combinatie in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.
Specificaties
| Merk | Siemens |
| Model | WD14H540DN |
| Categorie | Was-droog combinaties |
| Bestandstype | |
| Bestandsgrootte | 2.28 MB |
Alle handleidingen voor Siemens Was-droog combinaties
Meer handleidingen voor Was-droog combinaties
Veelgestelde vragen over Siemens WD14H540DN Was-droog combinatie
Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.
Mijn was-droog combinatie maakt veel lawaai en/of trilt hard, wat kan ik hieraan doen? Geverifieerd
Het kan dat de was-droog combinatie niet goed gesteld is, dit is te verhelpen door de pootjes van de was-droog combinatie te verstellen, zodat deze waterpas komt te staan. Ook kan de was-droog combinatie lawaai maken als er teveel was in zit. Als dit niet de oorzaken zijn, neem dan contact op met de fabrikant.
Ik vind dit nuttig (1335) Lees meerMijn was-droog combinatie stinkt., wat kan ik hier aan doen? Geverifieerd
Er zijn was-droog combinaties met zelfreinigende functies. Als deze functies er niet zijn is het mogelijk om een 100ml natuurazijn of 100gr soda in de trommel te doen en de was-droog combinatie een programma can 90 ℃ te laten draaien.
Ik vind dit nuttig (628) Lees meerWat is het verschil in gebruik tussen een was-droog combinatie en een losse wasmachine en droger? Geverifieerd
Het grootste voordeel is dat een was-droog combinatie minder ruimte inneemt. Een losse droger zal echter meer kunnen drogen dan een was-droog combinatie. Daarnaast kost een was-droog combinatie relatief veel energie en neemt hij iets meer tijd in beslag.
Ik vind dit nuttig (355) Lees meerKan ik een was-droog combinatie aansluiten op een verlengsnoer? Geverifieerd
Apparaten die veel stroom gebruiken, zoals een was-droog combinatie, kunnen niet zomaar op elk verlengsnoer worden aangesloten. Bekijk wat het vermogen is van de was-droog combinatie, aangegeven in Watt, en of het verlengsnoer dit aankan. Er zijn verlengsnoeren met dikkere kabels die gemaakt zijn om grotere apparaten op aan te sluiten.
Ik vind dit nuttig (310) Lees meerBeoordeling
Laat ons weten wat je van de Siemens WD14H540DN Was-droog combinatie vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Praat mee over dit product
Laat hier weten wat jij vindt van de Siemens WD14H540DN Was-droog combinatie. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.