Handleiding Sierra Designs Fire Storm Tent

Handleiding

S I E R R A D E S I G N S

SIERRA DESIGNS 2011 Cherry Street, Unit 202 Louisville, CO 80027 Phone: 303-262-3050 Fax: 303-262-3051 Toll Free: 800-635-0461

FIRE STORM TENT CONTENTS

Tent Body & Rainfly: 1 Line Tighteners: 2

Tent Poles: 3 Pitching Instructions: 1

Tent Stakes: 11* Stake Sack: 1

Guy Cord: 2 Pole Sack: 1

* Sierra Designs tents include stakes for pitching the body and fly under normal conditions.

Additional stakes may be required in severe conditons.

First Pitch

In order to familiarize yourself with your new tent,

we suggest that you “test pitch” it before embarking

on a wilderness trip.

Select a Site

At your campsite, look for an area that is protected

from the wind, in order to ensure sleeping comfort.

Clear the area of debris, such as sharp stones and sticks

which might abrade or puncture the tent floor. Choose

an area that will drain well when in rains.

Unfurl the Tent and Assemble the Poles

Unfurl the tent and lay the tent floor flat on the

ground. Carefully unfold the shock-corded pole sec-

tions and allow them to slide together. Do not allow

the poles sections to snap together. This can lead to

serious pole damage. Make certain that the insert of

each pole section is fully inserted into the next pole

section (Figure 1). You will have 5 poles all togeth-

er, 3 main body poles that will create the tent

structure (1 long pole, 2 short poles of equal length)

and two pre-bent poles, also of equal length that

will create the vestibules.

insert

incorrect

correct

Stake out the tent

Even though the Fire Storm is a free-standing tent we

recommend staking out the floor for greater pitching

ease, as well as, greater stability, especially in high

winds. First, stake out each of the webbing loops at

points C & D. Then move to the front of the tent,

pulling the webbing at points A & F until the floor is

semi-taut. Lastly, stake out points B & E.

Erect the Tent

Start with the two shorter poles. Insert the poles

tips into the stake loop grommets at points A-D, F-

C and attach the Clip-Loc at point G. Do not

engage the Clip-Locs at this time. Now attach the

remaining Swift Clips, designated by the grey web-

bing along both poles A-D, F-C. Take the

remaining long pole and insert the pole tips into the

grommets at points B & E, and attach the Clip-

Locs (Points H & I). Attach the remaining swift

clips along B-E pole, designated with orange web-

bing. Once all the clips are attached to the poles

you can engage the Clip Locs by wrapping the elas-

tic cord 2-3 times around the pole intersection.

Pass the beaded end of

the elastic through the

groove in the clip to

keep it taut.

FIRE STORM

Your Sierra Designs

FIRE STORM tent is very

easy to pitch and main-

tain. Follow these

instructions to pitch your

tent quickly, safely and

easily.

Figure 2: Tent Body (top view)

Figure 1: Correct Pole Assembly

A

B

C

D

E

F

G

H

I

Figure 3: Clip-Loc

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sierra Designs Fire Storm Tent. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sierra Designs. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sierra Designs Fire Storm Tent in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Sierra Designs Tenten
Meer handleidingen voor Tenten

Veelgestelde vragen over Sierra Designs Fire Storm Tent

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.