Handleiding SilverCrest IAN 103115 Headset

Handleiding

11/2014 – V 1.2

Trademarks

The Bluetooth

®

word mark and logos are registered trademarks of Bluetooth SIG,

Inc. (Special Interest Group).

USB is a registered trademark.

Other names and products may be the trademarks or registered trademarks of their

respective owners.

Introduction

Thank you for purchasing a SilverCrest product. The SilverCrest Bluetooth

®

headset

SBH 3.0 A1, hereinafter referred to as headset, allows operation with compatible

mobile phones.

Intended use

This headset is a consumer electronic device which allows you to make phone calls

with a compatible mobile phone without having to hold the phone. The device is

operated via a multifunction button. The headset can be worn very comfortably

either on the left or right ear due to the adjustable ear hook. The headset may only

be used privately and not for industrial or commercial purposes. Furthermore,

the device may not be used in tropical climates. The manufacturer does not accept

any liability for any resulting damage or faults in the event of unauthorised

modifications to the headset. Please observe the regulations and laws in the country

of use.

Supplied items

A Ear hook (mounted)

B Ear tip – medium (mounted)

C SilverCrest Bluetooth

®

headset SBH 3.0 A1

D Ear tip – small

E Ear tip – large

F USB charging cable

G These instructions (symbolic representation)

Technical data

Dimensions (W x H x D) approx. 43 x 26 x 18 mm

Weight approx. 10g (including ear hook)

Operating voltage 5V

Power consumption 500mA max. via USB

Battery Lithium polymer 85mAh

Talk time up to 4 hours

Standby time up to 100 hours

Charging time approx. 3 hours

Bluetooth

®

V3.0

Bluetooth

®

range up to 10 metres

Profile support HSP, HFP

Storage temperature -20°C to +45°C

Operating temperature +5°C to +35°C

Air humidity (rel. air humidity) max. 85%

The technical data and design may be changed without notification.

Safety instructions

Before using this headset for the first time, please read the following instructions

carefully and take note of the safety warnings, even if you are familiar with the use

of electronic devices. Store these instructions in a safe place for future reference. If

you sell the headset or pass it on, always include these instructions. They are an

integral part of the device.

Explanation of the hazard symbols used in these

instructions

DANGER! This symbol in conjunction with the "danger" note indicates

an imminent dangerous situation which, if not prevented, could result in

serious injury or even death.

WARNING! This symbol in conjunction with the "warning" note

indicates important information for safe operation of the device and the

safety of the user.

DANGER! Radio interface

Turn the headset off in aircraft, hospitals, operating rooms or in the vicinity of

medical electronic systems. The transmitted radio waves can impair the functionality

of sensitive devices. Keep the headset at least 20cm away from any pacemakers or

implantable cardioverter defibrillators because the proper functioning of the

pacemaker can be impaired by radio waves. The transmitted radio waves can

cause interference in hearing aids. Do not place the headset in the vicinity of

flammable gases or in a potentially explosive environment (e.g. paint shop) when

the radio components are switched on because the transmitted radio waves can

cause an explosion or a fire. The range of the radio waves is dependent on

conditions in the surrounding environment. In the event of data traffic via a wireless

connection, it is also possible for unauthorised third parties to receive data. Targa

GmbH is not responsible for radio or television interference caused by unauthorised

changes to this device. In addition, TARGA assumes no responsibility for the

replacement or exchange of connecting lines and devices not indicated by TARGA

GmbH. Only the user himself is responsible for the elimination of interference

caused by such unauthorised changes and for the replacement or exchange of the

devices.

DANGER! Risk of explosion!

The headset must not be thrown into a fire because the built-in battery may explode.

WARNING! Ensure that

 no direct heat sources (e.g. heating) can affect the headset

 no direct sunlight or bright artificial light reaches the headset

 any contact with splashed and dripping water and corrosive liquids is avoided

and the headset is not operated in the vicinity of water. In particular, the headset

should never be submerged in liquid; do not place any vessels filled with liquid,

e.g. vases or drinks, on or near the headset

 no fire sources (e.g. burning candles) are placed on or near the headset

 no foreign objects penetrate the device

 the headset is not in the immediate vicinity of magnetic fields (e.g. speakers)

 the headset is never subjected to extreme temperature fluctuations as this could

result in condensation and electrical short circuits. If the headset was subjected to

extreme temperature fluctuations, however, wait (approx. 2 hours) until the

headset has reached ambient temperature before use

 the headset is never subjected to excessive shocks and vibrations

 connected cables are always laid in such a manner that nobody can step on

them or trip over them. There is a risk of injury

 cables are never pulled on directly, but are always handled by the connector

Never place furniture or other heavy objects on the cable and take care that the

cable is not kinked, especially near the plug and connection sockets. Never tie a

knot in a cable and do not tie cables together.

DANGER! Children and persons with

disabilities

This headset can be used by children aged 8 and older and by persons with

reduced physical, sensory or mental abilities or lack of experience and knowledge

if they are supervised or have been instructed on the safe use of the headset and

understand the resulting risks. Children must not play with the headset. Cleaning

and user maintenance must not be carried out by children without supervision.

Always keep plastic packaging away from children.

It poses a suffocation risk!

WARNING! Cleaning / maintenance

It is necessary to repair the headset if it has been damaged in any way, for

example, if the housing is damaged, if liquid or objects have penetrated the device

or if the product has been exposed to rain or moisture. Repair work is also required

if the device is not working properly or has been dropped. If smoke is produced, or

there are any unusual sounds or smells, switch the headset off immediately. In these

cases, the headset should not be used until it has been inspected by authorised

service personnel. Only have the device repaired by qualified personnel. Never

open the housing of the headset. Only use a clean, dry cloth to clean the headset

and never use any corrosive liquids. Use a slightly moistened cloth and a mild

cleaning agent to remove stubborn dirt. Never try to open the housing of the

headset as this would void your warranty.

Overview

1 Multifunction button

2 LEDs (blue/orange)

3 Charging socket

4 Ear piece

First use

Charging the battery

Before the first use or when the built-in battery is empty, you charge it as follows:

 Connect the supplied USB charging cable (F) to the charging socket (3) and a

free USB socket of your computer when it is switched on or a USB power supply

(not supplied).

 The orange LED (2) lights up while the battery is being charged. Once the battery

is fully charged, the orange LED (2) goes out and the blue LED (2) lights up.

Never cover the headset while it is charging as it can become heated.

The orange LED (2) flashes when the battery is low.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je SilverCrest IAN 103115 Headset. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met SilverCrest. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van SilverCrest IAN 103115 Headset in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor SilverCrest Headsets
Meer handleidingen voor Headsets

Veelgestelde vragen over SilverCrest IAN 103115 Headset

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

SilverCrest IAN 306134 Headset

Handleiding

SilverCrest IAN 270819 Headset

Handleiding

SilverCrest IAN 293954 Headset

Handleiding

SilverCrest SGH 32 A1 Headset

Handleiding

SilverCrest SBH 3.0 C1 Headset

Handleiding

SilverCrest SGH 7 A1 Headset

Handleiding

SilverCrest IAN 313582 Headset

Handleiding

SilverCrest IAN 321165 Headset

Gerelateerde categorieën