Handleiding Skil 1082 AD Deltaschuurmachine

Handleiding

6

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

5) SERVICE

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR SANDERS

GENERAL

• This tool should not be used by people under the age of

16 years

• This tool is not suitable for wet sanding

• Never use the tool when cord is damaged; have it

replaced by a qualied person

• Do not work materials containing asbestos (asbestos

is considered carcinogenic)

• Alwaysdisconnectplugfrompowersourcebefore

making any adjustment or changing any accessory

ACCESSORIES

• SKIL can assure awless functioning of the tool only

when original accessories are used

• Do not continue to use worn, torn or heavily clogged

sanding sheets

BEFORE USE

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool (tools with

a rating of 230V or 240V can also be connected to a

220V supply)

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

• The noise level when working can exceed 85 dB(A); wear

ear protection

• Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wear a dust mask and work with a dust

extraction device when connectable

• Certain kinds of dust are classied as carcinogenic (such

as oak and beech dust) especially in conjunction with

additives for wood conditioning; wear a dust mask and

work with a dust extraction device when

connectable

• Follow the dust-related national requirements for the

materials you want to work with

• Wear protective gloves, safety glasses, close-tting

clothes and hair protection (for long hair)

• Secure the workpiece (a workpiece clamped with

clamping devices or in a vice is held more securely than

by hand)

• When sanding metal, sparks are generated; do not use

dust box/vacuum cleaner and keep other persons and

combustible material from work area

DURING USE

• Always keep the cord away from moving parts of the tool;

direct the cord to the rear, away from the tool

• Do not touch the moving sanding sheet

• In case of electrical or mechanical malfunction,

immediately switch o the tool and disconnect the plug

• If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

AFTER USE

• When you put away the tool, switch o the motor and

ensure that all moving parts have come to a complete

standstill

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut o the cord of this tool,

it must be disposed of safely and not left unattended

USE

• Mounting of sanding sheet 4

! disconnect the plug

! the dust suction requires the use of perforated

sanding sheets

! perforation in sanding sheet should correspond

with perforation in sanding foot

! replace worn sanding sheets in time

- always use the orange foam pad (which is subject to

wear and tear and as such excluded from the

warranty)

! always use the tool with the total sanding surface

covered with sanding paper

- knock the dust out of the VELCRO material on the

orange foam pad before mounting the sanding sheet

- mount VELCRO sanding sheet as illustrated

• Dust suction 5

- mount dust box A by sliding it onto tool as illustrated

until it snap-locks

- remove dust box A by pressing knob B and hold it in

that position while pulling dust box backwards

- empty dust box A regularly for optimal dust pick-up

performance

! do not use dust box when sanding metal

• On/o

- switch on/o the tool by pushing switch C 2 forward/

backwards

! before the sanding surface reaches the

workpiece, you should switch on the tool

! before switching off the tool, you should lift it

from the workpiece

• Speed control

For optimal sanding results on dierent materials

- with wheel D 2 you can set the desired sanding

speed

- before starting a job, nd the optimal speed and grit by

testing out on spare material

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Skil 1082 AD Deltaschuurmachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Skil. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Skil 1082 AD Deltaschuurmachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Skil Deltaschuurmachines
Meer handleidingen voor Deltaschuurmachines

Veelgestelde vragen over Skil 1082 AD Deltaschuurmachine

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Skil 7226 AC Deltaschuurmachine

Handleiding

Skil 3720 CD Deltaschuurmachine

Handleiding

Skil 7261 DA Deltaschuurmachine

Handleiding

Skil 7115 AA Deltaschuurmachine

Handleiding

Skil 7125 AA Deltaschuurmachine

Handleiding

Skil 7302-02 Deltaschuurmachine

Handleiding

Skil 7260 AA Deltaschuurmachine

Handleiding

Skil 3720 CB Deltaschuurmachine

Gerelateerde categorieën