Handleiding Skip Hop Dream & Shine Nachtlampje
Handleiding voor je Skip Hop Dream & Shine Nachtlampje nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.
Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.
Handleiding
Loading…
DREAM & SHINE
sleep trainer nightlight
185250-02
© 2019 Skip Hop, Inc.
50 W 23 ST, NY, NY 10010
In the US: 888.782.9548
www.skiphop.com
Made in China
Meets or exceeds applicable
safety standards.
OWNER’S MANUAL
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference recieved, including interference that may cause undesired operation. Changes
or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on,the user is encouraged to try and correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and the receiver.
— Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected.
— Consult the dealer or an experienced radio/TC technician for help.
FCC INFORMATION:
ICES-003 INFORMATION:
CAN ICES-3 (B)/NMB-3(B):
EC Rep:
Fox Williams
10 Finsbury Square
London EC2A 1AF, UK
CONTENTS:
NAP MODE:
SOOTHER & NIGHTLIGHT MODE:
CLEANING & CARE:
POWER SOURCE:
QUICK SETUP:
Read all instructions before use of the Sleep Trainer.
IMPORTANT! Keep instructions for future use.
USB Cord
Sleep Trainer
Unplug before cleaning. Clean with dry cloth only. To prolong the life of this product, remove batteries when toy is in storage.
Do not drop on hard surfaces or expose to moisture. Do not submerge in water.
Inserting the batteries:
Product requires 4 AA batteries, not included.
Using the USB Cord:
1. Loosen the
battery door screw
using a Phillips
head screwdriver.
The Sleep Trainer can be powered using batteries or by plugging it in using the included USB cord and a power adapter
(not included).
2. Open battery door compartment
and insert 4 new AA (1.5V)
Alkaline batteries into battery
box. Be sure to insert with
correct polarity.
3. Position the battery box
correctly into battery
compartment. Light
will flash to indicate
correct placement.
Perfect for training your little
one to go to bed on time, to
stay in bed until it is time to
get up—even at nap time—
and for use as a comforting
nightlight and soother.
4. Position the battery door
securely back into place and
tighten with a screwdriver.
*Batteries should be
replaced by an adult.
* Do not use without battery
door properly attached
.
Ensure USB cord is connected into item first before inserting
into power source. Connect to 5V output adapter (toy grade)
5.00 DC, 120mA (power adapter not included).
(when batteries or USB
cord are inserted for the
first time, the display will
read “12:00 AM”)
10 Minutes before it is okay to get
up in the morning, a warm yellow
light starts to fade in. When it is time
to get up, the light changes to green
and music plays for 2 minutes, while
the green light stays on for a total of
20 minutes, signaling that it is okay
to get out of bed. If volume is set to
L:00, no music will play.
3. Press to set
hour. Press again
to set minutes.
1. Press until
is under “TIME”
1. Press until
is under “WAKE”
2. Press
to adjust
Hours/
Minutes
At the end of product life, remove batteries from product by following the above battery replacement instructions. Always dispose of used
batteries properly. See section on safety and disposal information. • Batteries are to be inserted with the correct polarity. • Do not burn
batteries. • Non-rechargeable batteries are not to be recharged. • Rechargeable batteries are only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before being charged. • Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited. • Different types of batteries or new and used batteries are not to be mixed. • Do not mix
alkaline, standard (carbon-zinc), or rechargeable batteries.
CONSUMER INFORMATION: SAFETY AND DISPOSAL
At end of product life remove batteries from product by following the battery replacement instructions. Substances used in
batteries pose potential environmental and health effects. Do not mix waste batteries with other waste. Keep waste batteries
separate. Do not dispose of by landfill or by incineration. Return waste batteries to your point of purchase or recycle center. Recycle
all waste batteries per local regulation. Do not dispose of Waste Electrical Electronic Equipment (WEEE), including batteries, in
unsorted municipal waste; collect separately. Dispose of at WEEE collection sites per local regulation. WEEE contains chemicals
that are hazardous to the environment and human health. The end-user’s participation is critical to the success of WEEE collection.
Set the Time:
Set the Wake Time
BATTERY INFORMATION:
• In WAKE, SLEEP and NAP modes,
a melody will play automatically.
• For SOOTHER mode, you can
choose from three sounds.
Whichever volume is selected
will work for all modes. To disable
sound for all modes, set the
volume to L:00.
MODE
TIME
PM
WAKE SLEEP NAP SOUND
LIGHT
SET
1. Press until
is under “SOUND”
Volume settings:
• L:00 = Sound Off
• L:01 = Lowest Setting
• L:02 = Medium Setting
• L:03 = Loudest Setting
Soother sounds:
• Sd:01 = Lullaby
• Sd:02 = White Noise
• Sd:03 = Gentle Rain
2. Press to
select songs
and volume
level.
Note: If you do not choose a volume level, it will default
to the loudest setting. If you do not choose a song, it will
default to Lullaby.
Set the Sound and Volume
3. Press to set
sound. Press again
to set the volume.
EN
MODE
TIME
PM
WAKE SLEEP NAP SOUND
LIGHT
SET
MODE
TIME
PM
WAKE SLEEP NAP SOUND
LIGHT
SET
3. Press to set hour. Press again to set the minutes.
4. Press and hold to activate WAKE mode, indicated by “ ”
10 Minutes before it is okay to get
up from a nap, a warm yellow light
starts to fade in. When naptime is
over, the light changes to green and
music plays for 2 minutes, while the
green light stays on for a total of 20
minutes, signaling that it is okay to
get out of bed. If volume is set to
L:00, no music will play.
Set Nightlight Brightness
(you only have to do this once, it will remember your choice next time)
1. Press until
is under “LIGHT”.
The light will
come on at
full brightness.
2. Press to
change
brightness
level (0, 30%,
60%, 100%)
MODE
TIME
PM
WAKE SLEEP NAP SOUND
LIGHT
SET
3. Press to set (you will hear a beep). If you
press and hold, the light will stay on for
20 minutes at this setting indicated by “ ”
Activate Soother/ Nightlight: Press the Sun Button to toggle through the following choices:
• 1st press: Your chosen sound Plays (unless volume is set to L:00).
• 2nd press: Light comes on while sound is playing
• 3rd press: Sound turns off, light stays on
• 4th press: Light turns off
Light and/or sound stays on for 30 minutes.
WAKE MODE:
USB
Direct current power input connector on Sleep Trainer. The positive
connector is internal and the negative connector is exterior.
The power adapter is a class ll electrical device.
Dispose of in accordance with local law.
Separate collection for WEEE.
EU Compliance
AS/NZS RCM
Transformer Toy
Product is for indoor use only.
Direct current only.
Please read all instructions.
Rating Label is located on the bottom of the product.
Sun Button
To activate Wake Mode, press “MODE” until arrow is under WAKE.
Press and hold until a line appears under WAKE.
Wake time defaults to 7am.
To activate Sleep Mode, press “MODE” until arrow is under SLEEP.
Press and hold until a line appears under SLEEP.
Sleep time defaults to 8pm.
To begin a nap anytime, press and hold the Sun Button.
Nap duration defaults to 60 minutes.
To turn on the Nightlight/Soother, press the Sun Button.
Light and/or sound stays on for 30 minutes.
Wake Mode:
Sleep Mode:
Nap Mode:
Nightlight/
Soother:
SLEEP MODE:
When it is time to go to bed at night,
music plays for two minutes (unless
volume is set to L:00) while a yellow
light animation plays. When the
music ends, the light turns red and
stays on for 20 minutes, signaling
that it is bed time.
1. Press until
is under “SLEEP”
2. Press
to adjust
Hours/
Minutes
Set the Sleep Time
MODE
TIME
PM
WAKE SLEEP NAP SOUND
NIGHT
LIGHT
SET
3. Press to set hour. Press again to set the minutes.
4. Press and hold to activate SLEEP mode, indicated by “ ”
Light & Sound:
• Brightness defaults to
highest level (3)
• Sound defaults to
Sound 1 (Lullaby)
• Volume defaults to
highest level (3)
Set Nap Duration
3. Press to set
nap duration
1. Press until
is under “NAP”
2. Press to adjust
NAP TIME
Duration
(30 min-2hr)
MODE
TIME
PM
WAKE SLEEP NAP SOUND
LIGHT
SET
Activate Nap Mode: Nap mode can be activated at any time. Press and hold the Sun
Button for 2 seconds until you hear a beep. To cancel nap time, press and hold again.
FCC
2. Press to adjust
Hours/ Minutes
Adult Assembly Required.
IWARNING: This is an electric lamp, not a toy. To avoid risk of fire, burns, electric shock and injury, it should not be played with
or placed where small children can reach it. To reduce the risk of electric shock: always unplug the appliance from the electrical outlet
immediately after using and before cleaning; do not reach for an appliance that has fallen into water—unplug it immediately; do not place
or store appliance where it can fall or be pulled into a tub or sink; do not place in or drop into water or other liquid. To reduce the risk of
burns, fire, electric shock or injury to persons: close supervision is necessary when this appliance is used by or near children. Cord may be
a strangulation hazard. Keep out of reach of children. Do not use with extension cords. Always use with adult supervision. The product is
not to be connected to more than recommended number of power supplies. Do not leave infant unattended with product. Do not place
product in crib. Inspect product before each use and discard if damaged or worn. This product cannot be used without the battery door.
This product is not a toy. The transformer is not a toy. Products liable to be cleaned with liquids are to be disconnected from the
transformer before cleaning. The product shall only be used with a transformer for toys. The product is only to be connected to Class II
equipment bearing the symbol . Discard packaging materials properly. Please retain important information for future reference.
ICAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS: Ensure USB cord is connected into item first before inserting into power source. User should
connect to 5V output adapter (toy grade) 5.00 DC, 120mA. No serviceable or replacement parts inside. Misuse can cause electrical shock.
The ventilation should not be impeded by covering the product with items, such as newspapers, tablecloths, curtains, etc. No naked
flame sources, such as lighted candles, should be placed on the apparatus. Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire etc. The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus. Do not use if liquid has entered the product. Inspect entire product
frequently and discard at first sign of damage.
Direct current output from USB connector.
+ Positive terminal / - Negative terminal
Loading…
Beoordeling
Laat ons weten wat je van de Skip Hop Dream & Shine Nachtlampje vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.Meer over deze handleiding
We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Skip Hop Dream & Shine Nachtlampje. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Skip Hop. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Skip Hop Dream & Shine Nachtlampje in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.
Specificaties
| Merk | Skip Hop |
| Model | Dream & Shine |
| Categorie | Nachtlampjes |
| Bestandstype | |
| Bestandsgrootte | 0.22 MB |
Alle handleidingen voor Skip Hop Nachtlampjes
Meer handleidingen voor Nachtlampjes
Praat mee over dit product
Laat hier weten wat jij vindt van de Skip Hop Dream & Shine Nachtlampje. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.