Location of controls
Tape compartment
CD compartment
6 OPEN/CLOSE
Speaker
Display window
VOLUME
TONE
FUNCTION
TUNE
2 (headphones)
OPR/BATT
Playing a CD
1 Set FUNCTION to CD.
Listening to the radio
Playing a tape
1 Set FUNCTION to TAPE
(CD/RADIO OFF).
Use TYPE I (normal) tape only.
To Do this
Adjust the volume Turn VOLUME.
Adjust the tone Turn TONE.
Stop playback Press p6 .
Fast-forward or rewind the Press ) or 0 for
tape the side facing
upward
Pause playback Press P.
Press the button again
to resume play after
pause.
Eject the cassette. Press p6.
Recording
Use TYPE I (normal) tape only.
With the side you want to
record on facing upward.
2 Press 6OPEN/CLOSE down to open
the CD compartment and place a CD
on the CD compartment.
With the label side up
3 Close the compartment.
4 Press ^.
The player plays all
the tracks once.
Display
Track number
To Do this
Adjust the volume Turn VOLUME.
Adjust the tone Turn TONE.
Stop playback Press p.
Pause playback Press ^.
Press again to resume
play after pause.
Go to the next track Press +.
Go back to the previous track Press =.
Locate a point while listening Press + (forward) or
to the sound = (backward) while
playing and hold down
until you find the point.
Remove the CD
Press 6 OPEN/CLOSE.
Turn off the player Set FUNCTION to
TAPE (CD/RADIO
OFF).
1 Set FUNCTION to FM or AM.
For FM For AM
2 Turn TUNE to tune in a radio staton.
If the received FM stereo is too weak, the
reception becomes monaural.
To Do this
Adjust the volume Turn VOLUME.
Adjust the tone Turn TONE.
Turn off the radio Set FUNCTION to
TAPE (CD/RADIO
OFF).
To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself
for AM.
2 Press p6 to open the tape compartment
and insert a recorded tape. Close the
compartment.
With the side you want to
play on facing upward.
3 Press (.
1 Insert a blank tape.
2 Select the program source you
want to record.
To record from the CD player, set
FUNCTION to CD and insert a CD.
To record from the radio, set
FUNCTION to FM or AM and tune
in the station you want.
3 Press r (( is depressed automatically.)
To Press
Stop recording p6
Pause recording P
Press the button again
to resume recording
after pause.
Tips
•Adjusting the volume or the tone will not affect the
recording level.
•If the AM program makes a whistling sound after you’ve
pressed r in step 3, set the FM MODE/ISS (Interference
Suppress Switch) at the rear to the position that most
decreases the noise (only for the models equipped with
FM MODE/ISS selector at the rear).
•For best results, use the AC power as a power source for
recording.
•To erase a recording, proceed as follows:
1 Set FUNCTION to TAPE (CD/RADIO OFF).
2 Press r.
Notes on cassettes
•Break off the cassette tab from side A or B to prevent
accidental recording. If you want to reuse the tape for
recording, cover the broken tab with adhesive tape.
•The use of a cassette with more than 90 minutes of play
time is not recommended except for long, continuous
recording or playback.
Dial scale
Tip
To receive an FM stereo program (only for the models
equipped with FM MODE/ISS selector at the rear)
Set the FM MODE/ISS selector at the rear to STEREO. If the
FM broadcast is noisy, set the selector to MONO and the
radio will play in monaural.
Side A
Tab for side B
Tab for side A
Praat mee over dit product
Laat hier weten wat jij vindt van de Sony CFD-910 Stereoset. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.