Handleiding Sony ICF-C1iP Wekkerradio

Handleiding

Setting the clock

for the first time

This unit is preset to the current date and time at the

factory, and is powered by the back up battery. All

you need to do the first time is just plug it in and

select your time zone.

1 Plug in the unit.

2 Press TIME ZONE for more than two

seconds.

Area number “3” appears in the display.

If you live in the Western European Time zone,

you do not need to adjust the area setting.

3 Press TIME SET + or – repeatedly until

the desired number appears.

4

Press TIME ZONE to complete the setting.

Note

• During the shipment and your first use, a clock error

may occur. In this case, refer to “Setting the clock

and date” to set the correct time.

•The area number is set to 3 at the factory, but if the

unit is reset, the area number is changed to 2. When

you use the unit in a Western European time zone,

change the area number to 3. And set the time again

(see “Setting the clock and date”).

When daylight saving time

(summer time) begins

This model employs the Automatic Daylight Saving

Time/Summer Time adjustment. The DST indicator in

the display appears in the display at the beginning of

the daylight saving time (summer time), and

disappears at the end of it.

Automatic DST/Summer Time adjustment is based on

GMT (Greenwich Mean Time).

• Summer time begins at: 1:00 AM on the final

Sunday of March.

• Standard time begins at: 2:00 AM on the final

Sunday of October.

To deactivate the Automatic

DST/Summer Time adjustment

during the daylight saving time

(summer time) period.

The Automatic DST/Summer Time adjustment can be

cancelled.

Press CLOCK and TIME ZONE/ALARM

DISPLAY for more than two seconds. The Automatic

DST/ Summer Time adjustment will be cancelled. To

active the Automatic DST/Summer Time adjustment

again, repeat the same operation.

Setting the clock

and date

To change the setting manually, follow the procedure

from step 1.

1 Press CLOCK for more than 2 seconds.

The year will start to flash in the display.

2 Press TIME SET + or – until the correct

year appears in the display.

3 Press CLOCK.

4 Repeat steps 2 and 3 to set the month, day

and time.

After setting the minute the clock starts from

0 seconds. But if you do not set “Minute”, the

clock does not start from 0 second flat.

•

Pressing and holding

+ or –

changes the year,

month, day or time rapidly.

• While setting the clock, you must perform each step

within about 65 seconds, or the clock setting mode

will be cancelled.

To display the year and date

Press CLOCK once for the date, and within

about 5 seconds press it again for the year.

The display shows the date or year for about

5 seconds and then changes back to the current time.

Setting the brightness

of the display

Three levels of brightness are available by

pressing SNOOZE/BRIGHTNESS.

High (default) t Middle t Low

To

Turn off the iPod

Pause playback

Go to the next

track

Go back to the

previous track

Locate a point

while listening to

the sound

Locate a point

while observing

the display

Go back to the

previous menu

Select a menu

item or a track

for playback

Execute the

selected menu or

the playback

Press

OFF, or press and hold u

N/X

To resume play, press it again.

>

.

> (forward) or .

(backward) while playing and

hold it until you find the point.

> (forward) or .

(backward) in pause and hold it

until you find the point.

MENU*

R/r*

ENTER*

Troubleshooting

Should any problem occur with the unit, make the

following simple checks to determine whether or not

servicing is required.

If the problem persists, consult your nearest Sony

dealer.

The clock displays “AM 12:00” due to a

power interruption.

•The battery is low. Replace the battery. Remove the

old battery and install a new one.

When daylight saving time begins, the clock

does not employ the daylight saving time

automatically.

• Make sure the clock is set correctly.

•Press and hold CLOCK and TIME ZONE/ALARM

DISPLAY simultaneously for at least two seconds

to employ the DST function.

The alarm does not sound at the preset alarm

time.

• Has the desired alarm been activated? (i.e., Does the

ALARM A (or B) indicator light up?)

The radio or iPod alarm is activated but no

sound comes on at the preset alarm time.

• Has VOLUME been adjusted?

There is no sound from the iPod.

• Make sure the iPod is securely connected.

• Adjust the VOLUME.

The iPod cannot be operated with this unit.

• Make sure the iPod is securely connected.

The iPod cannot be charged.

• Make sure the iPod is securely connected.

Specifications

Time display

12-hour System

Frequency range

Band Frequency Channel step

FM 87.5 – 108 MHz 0.05 MHz

AM 531 – 1 602 kHz 9 kHz

Speaker

Approx. 5.1 cm (2 inches) dia., 12 Ω

Power output

3 W + 3 W (at 10% harmonic distortion)

Power requirements

230 V AC, 50 Hz

For clock backup: 3 V DC, one CR2032 battery

Dimensions

Approx. 300 × 130 × 139 mm (w/h/d)

(11

13

/16 × 5

1

/8 × 5

1

/2 inches) incl. projecting parts

and controls

Mass

Approx. 1.9 kg (4 lb 3.02 oz) incl. CR2032 battery

Supplied accessories

Remote commander (1)

Audio connecting cable (1)

AM loop aerial (1)

Design and specifications are subject to change

without notice.

Time zone

Eastern European Time/Eastern

European Summer Time

Central European Time/Central

European Summer Time

Western European Time/Western

European Summer Time

Area number

1

2

(default)

3

Operating the iPod

You can enjoy iPod audio by connecting this unit. To

use an iPod, refer to the user’s guide of your iPod.

Compatible iPod models

The compatible iPod models are as follows. Update

your iPod to use the latest software before you use it.

Notes

• The connector of the unit is for sole use for iPod.

When you use the devices do not match with the

connector, connect it to the AUDIO IN terminal of

this unit with the supplied audio connecting cable.

• Sony cannot accept responsibility in the event that

data recorded to iPod is lost or damaged when using

an iPod connected to this unit.

1 Put the iPod into the unit’s connector.

Adjust the rear support forward or backward

checking the back of the iPod fits snugly against

the rear support to protect the connector.

2 Press N/X.

The iPod begins to play automatically.

You can operate the connected iPod by the unit or

iPod buttons.

*These operations are available only when using the

supplied remote commander.

Notes

•When placing or removing the iPod, keep it straight

and parallel with the rear support.

• Do not carry the unit with an iPod set on the

connector. Doing so may cause a malfunction.

•When placing or removing the iPod, brace the unit

with one hand and take care not to press the controls

of the iPod by mistake.

• Do not pull on the rear support strongly as it cannot

be detached from the unit and may cause a

malfunction.

•To use an iPod, refer to the user’s guide of your

iPod.

• Before disconnecting the iPod, pause playback.

Tip

Apple’s iPod Universal Dock Adapter can be used

with this unit.

To use the unit as a battery

charger

You can use the unit as a battery charger.

The charging begins when the iPod is placed on the

connector.

The charging status appears in the iPod display. For

details, see the user's guide of your iPod.

On copyrights

•iPod is a trademark of Apple Inc., registered in the

U.S. and other countries.

• All other trademarks and registered trademarks are

of their respective holders. In this manual, ™ and ®

marks are not specified.

Operating the radio

—Manual tuning

1 Press RADIO ON to turn on the radio.

The display shows the band and frequency.

2 Press RADIO ON repeatedly to select the

desired band.

Each press changes the band as follows:

FM1

FM2

AM

FM1 and FM2 are the same frequency bands.

3 Use TUNING + or – to tune into the

desired station.

The FM frequency advances or reverses in

0.1 MHz channel steps and the AM frequency in

10 kHz channel steps.

4 Adjust volume using VOLUME.

To turn off the radio, press OFF.

Improving the

reception

FM: Extend the FM wire aerial fully to

increase reception sensitivity.

AM: Connect the supplied AM loop aerial to

the unit. Rotate the aerial horizontally for

optimum reception.

Keep away iPod from the AM loop aerial or the FM

wire aerial, as this may lead to interference of

reception.

Tip

If the FM broadcast is noisy, press

FM MODE on

the remote commander to turn off “STEREO” in the

display. The radio becomes clearer although the sound

becomes monaural.

Presetting your

favourite station

—Preset tuning

You can preset up to 10 stations in FM (5 stations in

FM1, 5 stations in FM2), and 5 stations in AM.

Presetting a station

1 Follow steps 1 to 4 in “Operating the

Radio” and manually tune into the station

you wish to preset.

2 Press and hold the desired PRESET

TUNING button for more than two

seconds for registration.

After the preset has finished, the preset number

appears on the display.

Example: To preset AM 1 260 kHz onto preset

2 button.

a few seconds after

v

To preset another station, repeat these steps.

To change the preset station, tune into the desired

station and hold down the PRESET TUNING 1

to 5 button. The new station will replace the

previous station on the preset button.

Tuning into a preset station

1 Press RADIO ON to turn on the radio.

2 Press one of the PRESET TUNING

buttons where the desired station is stored.

3 Adjust volume using VOLUME.

Setting the alarm

The dual alarm function allows you to set two alarm

programs (ALARM A and ALARM B).

The alarm time can be set for each program and the

alarm sound is selectable from RADIO, BUZZER or

iPod.

Notes

• Before setting the alarm, make sure to set the clock

(see “Setting the clock and date”).

•The factory setting alarm time is “AM 12:00”.

•To set the radio alarm, first tune in to a station

(see “Operating the radio”).

To set the alarm time

To set ALARM A

1 Press ALARM SET A for a few seconds.

2 Press TIME SET +/– to set the desired

hour, and press ALARM SET A.

3 Press TIME SET +/– to set the desired

minute, and press ALARM SET A.

4 Press TIME SET +/– to set the desired

alarm mode (RADIO, BUZZER or iPod)

and press ALARM SET A.

5 If you select the RADIO or iPod, press

TIME SET +/– to set the wake up

volume and press ALARM SET A.

To set ALARM B, follow the same steps above using

ALARM B instead of ALARM A.

To change the display between ALARM TIME A and

ALARM TIME B, press TIME ZONE/ALARM

DISPLAY.

When using iPod touch

To use music stored in an iPod touch to wake up, put

the iPod touch into the unit first, follow the steps

above to set alarm time, and then select the desired

music.

Notes

• When you use the radio alarm, the timed alarm

sounds with the last broadcasting station tuned to

before the power went off. When you set the radio

alarm, select the desired broadcasting station before

turning the power off.

• The ALARM A (or B) indicator flashes in the

display when the

alarm

sounds.

•

If a second alarm sounds during a first (or the

SNOOZE function is active), the second alarm takes

priority.

•

The alarm function works as usual at the beginning

and end day of the daylight saving time (summer

time). While the Automatic DST/Summer Time

adjustment is set, as a result, if the alarm is set at a

time skipped when the daylight saving time (summer

time) begins, the alarm is skipped, or if the alarm is

set at a time overlapped when the daylight saving

time (summer time) ends, the alarm sounds twice.

• If the same alarm time is set for both alarm

(ALARM A and B), the ALARM A takes priority.

To activate the alarm

After setting the alarm time, follow these steps:

To activate the ALARM A, press ALARM

SET A to display ALARM A.

To activate the ALARM B, press ALARM

SET B to display ALARM B.

Notes

•The alarm sounds at the set time even if the unit is

on.

• Make sure the iPod is installed correctly after

setting the iPod alarm.

Notes on using iPod touch

• If you set the iPod alarm while iPod touch music is

playing, and then turn the unit power off, when the

alarm time comes on, the alarm music will resume

from the point where the power was turned off.

•Even if the iPod alarm setting is complete, if you

turn the iPod touch power off before the unit, the

iPod alarm will not work.

To doze for a few more minutes

Press SNOOZE/BRIGHTNESS.

The sound turns off but will automatically come on

again after about 5 minutes.

The maximum length of the snooze time is 40 minutes.

To stop the alarm

Press OFF to turn off the alarm.

The alarm will come on sound again at the same time

the next day.

If OFF is not pressed, the buzzer alarm sounds

continuously for about 3 minutes, and then it stops

automatically.

The RADIO and iPod sound continuously until OFF

is pressed.

To deactivate the alarm

Press ALARM SET A (or B) to turn off the

ALARM A (or B) indicator from the display.

Note on alarm in the event of a power

interruption

• When the alarm sound is set to RADIO or iPod, it

will change to BUZZER automatically.

• If the backup battery is exhausted, the alarm will not

work in the event of power interruption. Replace the

battery periodically.

Setting the sleep

timer

You can fall asleep to the sound using the built-in

sleep timer that turns off the unit automatically after a

preset duration.

1 Press SLEEP while the unit is turned on.

SLEEP appears in the display.

2 Press SLEEP to set the sleep timer

duration.

Each time you press SLEEP, the duration

changes as follows:

90 60 30 15

OFF

The display returns to clock mode five seconds

after you have finished setting the duration setting

and released SLEEP, and then the sleep timer

starts.

The unit will play for the duration you set, and

then shut off.

To turn off the unit before the

preset time

Press OFF.

To use both sleep timer and

alarm

You can fall asleep to the radio and also be awakened

by the radio or buzzer alarm at the preset time.

1 Set the alarm. (See “Setting the alarm”.)

2 Set the sleep timer. (See “Setting the sleep

timer”.)

Other useful functions

To get the MEGA Xpand effect

Press MEGA Xpand. “MEGA Xpand” appears in

the display. You can get the effect of expansion of the

sound field. To return to normal sound, press the

button again.

Connecting

external equipment

To listen to sound

1 Connect the AUDIO IN jack of the unit to

the line out jack or headphone jack of the

external equipment using the audio

connecting cable (supplied).

Audio connecting cable

(supplied)

To external

equipment

2 Press AUDIO IN to display “AUDIO IN”.

3 Play the equipment connected to the

AUDIO IN jack.

4 Adjust the volume using VOLUME.

To return to the radio

Press RADIO ON.

The frequency is shown in the display.

To return to the iPod

Press N/X.

To stop listening

Press OFF,

and stop playback on the connected unit.

iPod touch

iPod mini

iPod 4th

generation

iPod 5th

generation (video)

iPod nano 1st

generation iPod 4th generation

(color display)

iPod nano 2nd

generation

(aluminum)

iPod classic

iPod nano 3rd

generation (video)

iPod nano 4th

generation

(video)

iPod touch 2nd

generation

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sony ICF-C1iP Wekkerradio. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sony. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sony ICF-C1iP Wekkerradio in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Sony Wekkerradio's
Meer handleidingen voor Wekkerradio's

Veelgestelde vragen over Sony ICF-C1iP Wekkerradio

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Sony ICF-C211 Wekkerradio

Handleiding

Sony ICF-CD853L Wekkerradio

Handleiding

Sony ICF-C211L Wekkerradio

Handleiding

Sony ICF-C160L Wekkerradio

Handleiding

Sony ICF-CD814 Wekkerradio

Handleiding

Sony ICF-C295 Wekkerradio

Handleiding

Sony ICF-CD831L Wekkerradio

Handleiding

Sony ICF-C115 Wekkerradio

Gerelateerde categorieën