Home > Audio, TV & Foto > Cassetterecorders > Sony Cassetterecorders > Sony M-729V Cassetterecorder

Handleiding Sony M-729V Cassetterecorder

Handleiding voor je Sony M-729V Cassetterecorder nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

English

As you read, refer to the illustrations in the Japanese corresponding text

(labeled with A, B, etc.)

z Getting Started

Preparing a Power Source

Choose one of the following power sources.

Dry Batteries B-a

Make sure that nothing is connected to the DC IN 3V jack.

1 Open the battery compartment lid.

2 Insert two size AA (R6) batteries (supplied) with correct

polarity and close the lid.

To take out the batteries B-b

To attach the battery compartment lid if it is accidentally

detached B-c

Attach as illustrated.

Battery life (Approximate hours)

Recording

Sony alkaline LR6 (SG) 19

Sony R6P(SR) 5.5

We recommend to use long-life alkaline batteries.

Notes

• Do not charge a dry battery.

• Do not use a new battery with an old one.

• Do not use different types of batteries.

• When you do not use the unit for a long time, remove the batteries to avoid any

damage caused by battery leakage and subsequent corrosion.

• Dry batteries will not be expended when another power source is connected.

When to replace the batteries H

Replace the batteries with new ones when the BATT (battery) lamps go off

and the i lamp flashes.

The BATT lamps change as illustrated.

Notes

• The unit will play back normally for a while, even after the i lamp flashes.

However, replace the batteries as soon as you can. If you do not, the playback cannot

be made with normal sound, noise may be recorded and the recorded sound will not

be loud enough.

• In the following cases you do not need to replace the batteries:

– if the BATT lamps flash with the playback sound when you turn up the volume.

– if the i lmap lights momentarily when the tape starts running or at the end of

the tape.

– if the i lamp flashes during FF (CUE/0) or REW ()/REVIEW).

• In some cases when the unit is used with rechargeable batteries (not supplied), only

one BATT lamp will light even though the batteries have been fully charged.

House Current

Connect the AC power adaptor to DC IN 3V and to

the wall outlet. Use the AC-E30M (in Japan) or AC

-E30HG (in other countries) AC power adaptor (not

supplied). Do not use any other AC power adaptor.

z Operating the Unit

Recording

You can record the sound easily with the built-in microphone.

1 Press wp (eject/stop) to open the cassette compartment lid.

2 Take out any slack in the tape and insert the cassette with the

side to start recording facing the lid. C-a

3 Close the cassette compartment lid.

4 Set VOR to L , H or OFF. For details, see “VOR (Voice Operated

Recording)”. C-b

5 Select the desired tape speed. C-c

6 Press r (record). C-d The REC lamp lights.

Recording starts. The REC lamp flashes depending on the

strength of the sound.

To Press or slide

Stop recording wp (eject/stop)

Pause recording Slide C PAUSE in the direction of the arrow.

The REC and BATT (or i) lamps go off.

To resume recording, slide C PAUSE in the opposite

direction of the arrow.

Take out a cassette wp (eject/stop)

Note

Select the 2.4 cm tape speed for recording, if you play back the recorded tape with

another unit. Otherwise, the sound quality may be changed.

Playing a Tape

1 Open the cassette compartment lid.

2 Insert a cassette with the side to start playing facing the lid. D-a

3 Close the cassette compartment lid.

4 Select the tape speed to the same speed as that used for

recording. D-b

5 Press 9 (play) then adjust VOL (volume). D-c

To Press or slide

Stop playback/stop fast wp (eject/stop)

forward or rewind*

Pause playback C PAUSE in the direction of the arrow.

The BATT lamp(s) goes off.

To resume playback slide C PAUSE in the

opposite direction of the arrow.

Fast forward Slide CUE/0•)/REVIEW toward CUE/0**.

during stop*

Rewind during stop* Slide CUE/0•)/REVIEW toward

)REVIEW**.

Search forward during Keep CUE/0•)/REVIEW pushed toward

playback (CUE) CUE0 during playback and release it at the point

you want.**

Search backward during Keep CUE/0•)/REVIEW pushed toward

playback (REVIEW) )REVIEW during playback and release it at the

point you want.**

* If you leave the unit after the tape has been wound or rewound, the batteries will

be consumed rapidly. Be sure to depress wp (eject/stop).

** The tape moves faster in the )/REVIEW mode than in the )/CUE mode.

Note

If the tape is completely rewound while searching backward during playback

(REVIEW), the CUE/0•)/REVIEW switch may not return to the center position

when you release the switch. In this case, push back the switch to the center to start

playback.

To increase the playback speed

Slide the FAST PB switch in the direction of the arrow. The playback speed

will be increased.

To return to the original speed, slide the FAST PB switch to the original

position.

Using Various Functions E

Tape counter

Before recording, press the reset button of the TAPE COUNTER to return to

000. It is useful to find the beginning of the recording.

Tape speed

Select the desired tape speed using TAPE SPEED.

2.4 cm for optimum sound (recommended for normal use): A 60-minute

recording can be made using both sides of the MC-60 microcassette.

1.2 cm for longer recording time: a 120-minute recording can be made using

both sides of the MC-60 microcassette.

Note

• Play back a tape with the same tape speed as that used for recording. If you are

going to play back the recorded tape using another unit, select the 2.4 cm tape speed

for recording. Otherwise, the sound quality may be changed.

VOR (Voice Operated Recording)

Set VOR to L or H. Press r (record), and the unit automatically starts

recording the sound and pauses when there is no sound (you can save tapes

and batteries).

H: To record at meetings or in a quiet place.

L: To record for dictation or in a noisy place.

When you use this system in a noisy place the unit stays in the recording

mode. If the sound is too soft, on the contrary, the unit will not start

recording. Set VOR to L (low) or H (high) depending on the conditions.

When you do not use this function, set VOR to OFF.

Polarity of the plug

Beoordeling

Laat ons weten wat je van de Sony M-729V Cassetterecorder vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.

Bent u tevreden over de Sony M-729V Cassetterecorder?
Ja Nee

Beoordeel dit product als eerste

0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Sony M-729V Cassetterecorder. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sony M-729V Cassetterecorder. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sony. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sony M-729V Cassetterecorder in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.