Home > Computers & Software > Floppydrives > Sony Floppydrives > Sony MPF920-Z Floppydrive

Handleiding Sony MPF920-Z Floppydrive

Handleiding voor je Sony MPF920-Z Floppydrive nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Specifications

Floppy disk drive

Compatible disks

3.5 in. 2HD (1.44 MB)

3.5 in. 2DD (720 KB)

Interface

34-pin signal interface

Operating and storage

environments

Temperature range

Operating temperature

5°C to 35°C (44°F to 95°F)

Miscellaneous

Power consumption

1.25 W (normal operation)

Mass

Approx. 430 g (0.95 lb.)

These specifications and the

appearance of the product are subject to

change without notice.

MPF920-Z Block Diagram

Signal

Interface

Connector

(34 pins)

Floppy Disk

Drive Logic

Spindle Motor IC

Spindle Motor

Read/Write

Block

Stepper

Driver

Stepper Motor

Read/Write

Head

MAIN IC

CXA8061Q

Dimensions

(Units: mm (in.))

101.6 (4.0)

144 (5.7)

FLOPPY DISK SLOT

21 (0.83)

60 (2.4)

90 (3.5)

3-M3 (0.12)

DEPTH 6 (0.24)

P.W.B

POWER

CONNECTOR

SIGNAL

INTERFACE

CONNECTOR

94 (3.7)

70 (2.8) 31 (1.22)

4-M3 (0.12)

DEPTH 5 (0.20)

Warranty Card & After Sales Service

Warranty Card

• A warranty card should be provided with this product at the place of

purchase.

• Please read the warranty card, fill in the specified information, and retain

it for future reference.

• The warranty period is one year from the date of purchase.

CAUTION

The warranty and technical support service are valid only in the countries or sales regions

specified on the warranty card.

After Sales Service

Repairs under warranty

We provide repair services as described in this guide and on the warranty

card. Please contact your supplier or repair service provider for details.

Repairs outside the warranty

If operation can be restored through repairs, we will repair the drive for a

charge.

Repair requirements

If the drive needs repairs, return it to the place of purchase or your repair

service provider.

• If you return the drive to the place of purchase or your repair service

provider because of damage resulting from misuse or other causes, you are

responsible for all repair-related expenses, including shipping, handling,

and product adjustments.

Troubleshooting

Before consulting your Sony representative, verify the following. If you are

still unable to identify or solve your problem, consult your retailer or Sony

representative.

Problem

The computer does not

detect the drive.

The floppy disk busy

indicator does not light

when reading or writing

data.

As soon as the computer is

turned on, the floppy disk

busy indicator lights and

stays lit.

The type of the drive is not

detected properly upon

startup.

Invalid media or bad Track

00 when formatting.

The same contents are

displayed for different

floppy disks.

Drive not ready error when

reading from drive X (where

X is the letter of the drive).

General failure error when

reading from drive X (where

X is the letter of the drive).

Sector not found error.

Cause/Solution

t Your computer and the drive may not be

properly connected. Disconnect the drive from

the computer and reconnect it.

t The floppy disk drive interface cable, power

cable may not be properly connected, or the

CMOS configuration incorrect. Verify the

connections and CMOS configuration.

t The floppy disk drive interface cable may be

connected in the wrong direction. Verify the

position of pin #1. If pin #1 is connected

properly, replace the cable.

t The CMOS configuration may be incorrect.

Verify the CMOS configuration for drive type: 3.5

in. 1.44 MB.

t You attempted to format an HD floppy disk at

720 KB or a DD floppy disk at 1.44 MB. Verify

the type of floppy disk in the drive.

t The CMOS configuration may be incorrect.

Verify the CMOS configuration for drive type: 3.5

in. 1.44 MB.

t The drive controller configuration may be

incorrect. Refer to the drive controller

documentation to verify its configuration.

t The drive controller may not be receiving the

signal indicating a change of floppy disk. Verify

the state of pin #34 and replace the floppy disk

drive interface cable, if necessary.

t If the cable is in good working order, the drive

may be malfunctioning. Contact your local Sony

Technical Support Center.

t There is no floppy disk in the drive. Insert a

floppy disk and try again.

t Verify the floppy disk drive interface cable.

t The drive motor may not be spinning. Contact

your local Sony Technical Support Center.

t The floppy disk in the drive is not formatted or

not formatted correctly. Use an appropriate

floppy disk.

t The drive may be out of alignment or otherwise

in need of servicing. Contact your local Sony

Technical Support Center.

t The floppy disk in the drive is not formatted or

not formatted correctly. Use an appropriate

floppy disk.

t The drive may be out of alignment or otherwise

in need of servicing. Contact your local Sony

Technical Support Center.

Write-enable

position

Write-protect

position

About Floppy Disks

Compatible floppy disks

The following floppy disks can be used with the drive.

CAUTION

• Do not use floppy disks that are incompatible with the drive, as it may damage the drive.

• If you use preformatted floppy disks, make sure that they are compatible with your OS.

Protecting data on floppy

disks

To prevent accidental loss of

important data, use the write-

protect switch on floppy disks.

When you slide the switch to the

write-protect position, you can read

data on floppy disks, but it is

impossible to write or delete data.

Back of the floppy disk

• Do not place floppy disks close to strong magnetic fields such as those generated by

speakers or televisions, as this could cause loss of data.

• Do not place floppy disks close to heat sources or in direct sunlight as this may warp the

floppy disk, making it unusable.

• Do not open the floppy disk shutter or touch the disk surface. Dirt or scratches on the disk

surface may make reading and writing impossible.

• Avoid dropping liquids on floppy disks.

• To protect important data, remove floppy disks from the drive and store them in a case

when they are not being used.

Handling notes

Make sure that you take the following precautions when handling floppy disks to ensure the

safety of your data.

Technical Support

Please consult the above sources before calling with questions about using

MPF920-Z, or with technical questions about the drive or the supplied

software. If using telephone or e-mail support, please have the following

information available:

• Model number: MPF920-Z

• Serial number

• Date and place of purchase

• Computer maker and model number

• Computer specifications

(CPU speed, memory size, OS version, etc.)

Local technical support is available only in the following

sales regions:

For Customer in the USA (Sony Electronics Inc):

• Free telephone support is offered for 90 days from your first call.

USA Technical Support only: Web based technical support is free of

charge and is available 24 hours a day, 7 days a week.

Web site: http://sony.storagesupport.com/

• Toll free: 1-800-588-3847

Monday to Saturday 8:00 a.m.- 8:00 p.m. CT

For Products purchased in Australia or New Zealand (Sony Australia Limited):

• Web site: http://www.sony.com.au

• Toll free: 1300-13-7669 or International 61-2-9887-6666

Monday to Friday 8:30 a.m.- 7:00 p.m. EST

• Microsoft, MS, MS-DOS, and Windows are registered trademarks of

Microsoft Corporation.

• Other system and product names used herein are registered trademarks or

trademarks of their respective manufacturers, although the ™ and ® marks

are not used in the text.

Before using this device, be sure to read the end user license agreements for

the software provided with your computer.

❑ Our product guarantee is valid only when the supplied accessories

(including software) are used in the specified or recommended system

environment, in accordance with this User’s Guide, and applies only

to this floppy disk drive. Our customer service and user support apply

only under these product guarantee conditions.

❑ Please note that we cannot accept responsibility for failure of the

computer or other devices, incompatibility with special hardware,

operating problems caused by improper installation of software, loss

of data, discs or other accidental or incidental damage that might

occur when using this product.

❑ The guarantee and user support for this product are valid only within

the countries or sales regions specified on the warranty card.

❑ Copyright laws prohibit the copying of all or part of the User’s Guide,

without obtaining permission of the copyright holder.

Beoordeling

Laat ons weten wat je van de Sony MPF920-Z Floppydrive vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.

Bent u tevreden over de Sony MPF920-Z Floppydrive?
Ja Nee

Beoordeel dit product als eerste

0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Sony MPF920-Z Floppydrive. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sony MPF920-Z Floppydrive. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sony. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sony MPF920-Z Floppydrive in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.