Handleiding Sony SEL70200GM2 Objectief
Handleiding voor je Sony SEL70200GM2 Objectief nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 1 veelgestelde vraag, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.
Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.
Handleiding
Loading…
交換レンズ
Interchangeable Lens
Objectif interchangeable
取扱説明書
Operating Instructions
Mode d’emploi
Manual de instrucciones
FE 70-200mm
F2.8 GM OSS Ⅱ
E-mount
SEL70200GM2
https://www.sony.net/
©2021 Sony Corporation
Printed in Thailand
5-027-300-02(1)
–1
(1) (2)
–2
–3
(1)
(3)
(2)
(1)
(1)
(3)
(2)
(2)
(3)
a
電気製品は、安全のための注意事項を守らな
いと、人身への危害や火災などの財産への損
害を与えることがあります。
使用上のご注意
フラッシュ使用時のご注意
周辺光量について
各部のなまえ
レンズの取り付けかた／取りはず
しかた
取 り 付 け か た（ イ ラ ス ト
–
参照）
1
レンズリヤキャップとカメラのボディ
キャップをはずす。
2
レンズとカメラの白の点（マウント標点）を
合わせてはめ込み、レンズを軽くカメラに押
し当てながら、時計方向に「カチッ」とロック
がかかるまでゆっくり回す。
3
レンズフロントキャップをはずす。
取りはずしかた
1
レンズフロントキャップを取り付ける。
2
カメラのレンズ取りはずしボタンを押した
まま、レンズを反時計方向に回してはずす。
（イラスト
–
参照）
三脚を使う
縦位置・横位置の変更
三脚台座の取りはずしかた/取り付けかた
取りはずしかた（イラスト
（3）参照）
1
レンズをカメラから取りはずす。
2
台座固定ノブを反時計方向に回してゆるめ
る
。
3
台座取りはずしレバーを押しながら
、三 脚
台座を矢印の方向に取りはずす
。
取り付けかた
1
三脚台座を三脚リングの取り付け部に
「カチッ」というまで差し込む。
2
台座固定ノブを時計方向に止まるまで回し
て三脚台座を固定する。
レンズフードを取り付ける
レンズフードの赤線をレンズの赤線（レンズ
フード指標）に合わせてはめ込み、レンズフード
の赤点とレンズの赤線が合って「カチッ」という
まで時計方向に回す（1）。
取りはずしかた
レンズフードのフード取りはずしボタンを押し
ながら、反時計方向に回してはずす。
ズームする
ズームリングを回して、希望の焦点距離（ズーム
の位置）に合わせる。
ピントを合わせる
A F（ オ ー ト フ ォ ー カ ス ）／ M F（ マ ニ ュ ア ル
フォーカス）の切り替え
レンズ側の設定
フォーカスモードスイッチを、AFまたはMFの
いずれか設定したいほうに合わせる（1）。
AF/MFコントロールボタンを装備したカメラをお
使いの場合
手ブレ補正を使用する
手ブレ補正スイッチ
手ブレ補正モードスイッチ
フォーカスホールドボタンを使用
する
フォーカスレンジ（AF駆動範囲）を
切り替える
フォーカスレンジ切り替えスイッチで、撮影距
離範囲を選択する。
絞りを調節する
IRISLOCKスイッチ
ご注意
-a
主な仕様
商品名
（型名）
FE 70-200mm
F2.8 GM OSS Ⅱ
(SEL70200GM2)
焦点距離（mm）
70-200
焦点距離イメージ*
1
（mm）
105-300
レンズ群一枚
14-17
画角1*
2
34°-12°30’
画角2*
2
23°-8°
最短撮影距離*
3
（m）
0.40-0.82
最大撮影倍率（倍）
0.3
最小絞り
F22
フィルター径（mm）
77
外形寸法（最大径×長さ）（約：mm）
88×200
質量（約：g）（三脚台座別）
1 045
手ブレ補正機能 あり
This instruction manual explains how to use
lenses. Precautions common to all lenses such
as notes on use are found in the separate
“Precautions before using”. Be sure to read both
documents before using your lens.
This lens is designed for Sony α camera system
E-mount cameras. You cannot use it on A-mount
cameras.
The FE 70-200mm F2.8 GM OSS Ⅱ is compatible
with the range of a 35mm format image sensor.
A camera equipped with a 35mm format image
sensor can be set to shoot at APS-C size.
For details on how to set your camera, refer to its
instruction manual.
For further information on compatibility, visit the
web site of Sony in your area, or consult your dealer
of Sony or local authorized service facility of Sony.
For Customers in the U.S.A.
For question regarding your product or for the Sony
Service Center nearest you,
call 1-800-222-SONY (7669).
Supplier’s Declaration of Conformity
Trade Name : SONY
Model : SEL70200GM2
Responsible Party : Sony Electronics Inc.
Address : 16535 Via Esprillo, San Diego, CA 92127 U.S.A.
Telephone Number : 858-942-2230
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Notes on use
• Do not leave the lens exposed to the sun or a bright
light source. Internal malfunction of the camera body
and lens, smoke, or a fire may result due to the effect
of light focusing. If circumstances necessitate leaving
the lens in sunlight, be sure to attach the lens caps.
• When shooting against the sun, keep the sun completely
out of the angle of view. Otherwise, solar rays may
be concentrated at a focal point inside the camera,
causing smoke or a fire. Keeping the sun slightly out
of the angle of view may also cause smoke or a fire.
• When carrying a camera with the lens attached, firmly
grasp the body of the lens, such as the tripod collar.
• This lens is not water-proof, although designed with
dust-proofness and splash-proofness in mind. If using
in the rain etc., keep water drops away from the lens.
• If the lens alone is shaken or if a camera with the lens
attached is shaken while the camera is turned off,
an internal component of the lens may rattle. This,
however, does not indicate a malfunction.
In addition, while you carry around the lens, your
movement may cause the internal lens groups to
shake. This, however, does not affect the performance
of the lens groups.
Precautions on using a flash
• With certain combinations of lens and flash, the lens
may partially block the light of the flash, resulting in
a shadow at the bottom of the picture. In such a case,
adjust the shooting distance before shooting.
Vignetting
• When using the lens, the corners of the screen
become darker than the center. To reduce this
phenomena (called vignetting), close the aperture by
1 to 2 stops.
Identifying the Parts
1 Lens hood index 2 Focusing ring 3 Zooming ring
4 Focal-length index (gray) 5 Aperture ring
6 Aperture scale 7 Aperture index
8 Tripod collar ring index (gray) 9 Lens contacts*
10 Tripod collar ring 11 Focus-hold button
12 Focal-length scale 13 Focus-mode switch
14 Full-time direct manual focus switch
15 Focus-range limiter
16 Tripod collar ring index (gray) 17 Mounting index
18 Lens mount rubber ring
19 Tripod collar ring-locking knob
20 IRIS LOCK switch 21 SteadyShot mode switch
22 SteadyShot switch 23 Tripod collar (detachable)
24 Polarizing-filter window 25 Lens hood
26 Aperture click switch
27 Tripod collar release lever
28 Tripod collar-locking knob
29 Hood release button
* Do not touch the lens contacts.
Attaching and Detaching the Lens
To attach the lens
(See illustration
–
.)
1
Remove the rear lens cap and the camera
body cap.
2
Align the white index on the lens barrel
with the white index on the camera
(mounting index), then insert the lens
into the camera mount and rotate it
clockwise until it locks.
• Do not press the lens release button on the
camera when mounting the lens.
• Do not mount the lens at an angle.
3
Remove the front lens cap.
• You can attach/detach the front lens cap in two
ways, (1) and (2). When you attach/detach the lens
cap with the lens hood attached, use method (2).
To detach the lens
1
Attach the front lens cap.
2
While holding down the lens release
button on the camera, rotate the lens
counterclockwise until it stops, then
detach the lens. (See illustration
–
.)
Using the Tripod
When using a tripod, attach it to the tripod collar of
the lens, not to the tripod receptacle of the camera.
To change vertical/horizontal
position
Loosen the tripod collar ring-locking knob on
the tripod collar (1) and rotate the camera either
direction. The camera can be quickly switched
between vertical and horizontal positions while
maintaining stability when using a tripod.
• Gray dots (tripod collar ring indexes) are located at
90° intervals on the collar ring. Align a gray dot on
the tripod collar ring with the gray dot (tripod collar
ring index) on the lens to adjust the camera position
precisely (2).
• Tighten the tripod collar-locking knob firmly after the
camera position is set.
• The tripod collar ring may hit the camera body or
accessory when rotated, depending on the camera
or accessory model. For more information on
compatibility with cameras and accessories, visit the
web site of Sony for your area.
Detaching and attaching the tripod
collar
Detaching the tripod collar
(See illustration
(3))
The tripod collar can be detached from the lens
when not using a tripod.
1
Remove the lens from the camera.
• See “
Attaching and Detaching the Lens” for
details.
2
Rotate the tripod collar-locking knob
counterclockwise to loosen it
.
3
While pressing the tripod collar release
lever
, detach the tripod collar in the
direction of the arrow
.
• If you detach the tripod collar without removing
the lens from the camera, the tripod collar may hit
the camera body or accessory. We recommend you
remove the lens from the camera before detaching
the tripod collar.
• When removing the tripod collar from the tripod collar
ring, the tripod screw holes become exposed on the
tripod collar ring. Do not attach a tripod or monopod
to the tripod screw hole. If you do that, you will
damage the screw hole. Then you will not be able to
attach the tripod collar to the tripod collar ring.
Attaching the tripod collar
1
Slide the tripod collar to the mount of the
tripod collar ring until it clicks.
2
Rotate the tripod collar-locking knob
clockwise firmly to set it.
• Be sure that the tripod collar-locking knob is set
firmly. If the tripod collar-locking knob is not set
firmly, the lens may fall off the tripod collar.
Attaching the Lens Hood
It is recommended that you use a lens hood to
reduce flare and ensure maximum image quality.
Align the red line on the lens hood with the
red line on the lens (lens hood index), then
insert the lens hood into the lens mount and
rotate it clockwise until it clicks into place
and the red dot on the lens hood is aligned
with the red line on the lens (lens hood
index) (1).
• Be sure to rotate the lens hood until it clicks into place
to prevent its disengagement from the lens.
• The polarizing-filter window can be opened (2) to
allow the polarizing filter (sold separately) to rotate
without having to remove the lens hood. Close the
window when shooting.
• When using an external flash (sold separately),
remove the lens hood to avoid blocking the flash light.
• When storing, fit the lens hood onto the lens
backwards (3).
To remove the lens hood
While holding down the hood release button
on the lens hood, rotate the lens hood
counterclockwise.
Zooming
Rotate the zooming ring to the desired focal
length.
Focusing
• The focus-mode switch of this lens does not function
with some camera models.
For further information on compatibility, visit the web
site of Sony in your area, or consult your dealer of
Sony or local authorized service facility of Sony.
To switch AF (auto focus)/MF
(manual focus)
The focus mode can be switched between AF and
MF on the lens.
For AF photography, both the camera and lens
should be set to AF. For MF photography, either or
both the camera or lens should be set to MF.
To set the focus mode on the lens
Slide the focus-mode switch to the
appropriate mode, AF or MF (1).
• Refer to the camera manuals to set the focus mode of
the camera.
• In MF, turn the focusing ring to adjust the focus (2)
while looking through the viewfinder, etc.
• With the full-time direct manual focus switch slid to
ON, the focus mode automatically switches to MF
when the focusing ring is rotated, regardless of the AF
mode setting and the focus adjustment (3).
To use a camera equipped with an AF/MF
control button
• By pressing the AF/MF control button during AF
operation, you can temporarily switch to MF.
• Pressing the AF/MF control button during MF
operation lets you temporarily switch to AF if the lens
is set to AF and the camera to MF.
Using SteadyShot
SteadyShot switch
• ON: Compensate for camera shake.
• OFF: Does not compensate for camera shake. We
recommend setting the SteadyShot switch to
OFF when shooting with a tripod.
SteadyShot mode switch
Set the SteadyShot switch to ON, and set the
SteadyShot mode switch.
• MODE1: Compensate for normal camera shake.
• MODE2: Compensate for camera shake when panning
moving subjects.
• MODE3: Compensate for camera shake to minimize
framing disturbances. This helps you to keep
up with fast and irregularly moving subjects
for photography, for example, in sports
games.
Using focus-hold buttons
• The focus-hold button of this lens does not function
with some camera models.
For further information on compatibility, visit the web
site of Sony in your area, or consult your dealer of
Sony or local authorized service facility of Sony.
This lens has 3 focus-hold buttons.
Press the focus-hold button in AF to cancel AF.
The focus is fixed and you can release the shutter
on the fixed focus. Release the focus-hold button
while pressing the shutter button halfway to start
AF again.
Switching Focus Range
(AF range)
The focus-range limiter enables you to reduce the
AF time. This is useful when the subject distance is
definite.
Slide the focus-range limiter to select the
focus range.
• FULL: You can adjust the focus from the minimum
focusing distance to infinity.
• - 3m: You can adjust the focus from 3 m (9.8 feet)
to infinity.
Adjusting the Aperture
IRIS LOCK switch
• Lock: You can lock the aperture ring at “A” on the
aperture scale, or rotate it between f/2.8 and
f/22.
• Release:You can rotate the aperture ring between “A”
and f/2.8 on the aperture scale.
When you align “A” on the aperture scale to the
aperture index, the camera is set to auto iris mode
and the exposure is set by the camera. And you can
adjust the amount of light manually between f/2.8
and f/22 by rotating the aperture ring.
Notes
Set the aperture click switch to “OFF” when shooting
movies. (See illustration
-a.)
When the aperture click switch is set to “OFF,” the
sound of the aperture ring is reduced. (For movie
recording)
If you change the aperture value while shooting a
movie with the aperture click switch set to “ON,” the
sound of the aperture ring will be recorded.
Specifications
Name (Model name)
FE 70-200mm
F2.8 GM OSS Ⅱ
(SEL70200GM2)
Focal length (mm) 70-200
35mm equivalent
focal length*
1
(mm)
105-300
Lens groups-elements 14-17
Angle of view 1*
2
34°-12°30’
Angle of view 2*
2
23°-8°
Minimum focus*
3
(m (feet)) 0.40-0.82 (1.32-2.69)
Maximum magnification (×) 0.3
Minimum aperture f/22
Filter diameter (mm) 77
Dimensions
(maximum diameter × height)
(approx., mm (in.))
88 × 200
(3 1/2 × 7 7/8)
Mass (approx., g (oz.))
(excluding tripod collar)
1 045 (36.9)
SteadyShot Yes
For further information on compatibility with the
tele converter (sold separately) and specifications
used with the tele converter, visit the web site of
Sony in your area, or consult your dealer of Sony or
local authorized service facility of Sony.
*
1
This is the equivalent focal length in 35mm format
when mounted on an Interchangeable Lens Digital
Camera equipped with an APS-C sized image sensor.
*
2
Angle of view 1 is the value for 35mm cameras, and
angle of view 2 is the value for Interchangeable Lens
Digital Cameras equipped with an APS-C sized image
sensor.
*
3
Minimum focus is the distance from the image
sensor to the subject.
• Depending on the lens mechanism, the focal length
may change with any change in shooting distance.
The focal lengths given above assume the lens is
focused at infinity.
Included items
(The number in parentheses indicates the number
of pieces.)
Lens (1), Front lens cap (1), Rear lens cap (1), Tripod
collar (1), Lens hood (1), Lens case (1), Set of printed
documentation
Designs and specifications are subject to change
without notice.
and are trademarks of Sony Group Corporation.
Loading…
Beoordeling
Laat ons weten wat je van de Sony SEL70200GM2 Objectief vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.Meer over deze handleiding
We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sony SEL70200GM2 Objectief. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sony. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sony SEL70200GM2 Objectief in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.
Specificaties
| Merk | Sony |
| Model | SEL70200GM2 |
| Categorie | Objectieven |
| Bestandstype | |
| Bestandsgrootte | 0.82 MB |
Alle handleidingen voor Sony Objectieven
Meer handleidingen voor Objectieven
Veelgestelde vragen over Sony SEL70200GM2 Objectief
Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.
Waarvoor staat de "f" notatie bij objectieven? Geverifieerd
De f-waarde staat voor het diafragmagetal. Dit is de brandpuntsafstand gedeeld door de apertuur (opening). Een hogere f-waarde betekent zodoende een kleinere opening en dus minder licht in de lens.
Ik vind dit nuttig (18) Lees meer
Praat mee over dit product
Laat hier weten wat jij vindt van de Sony SEL70200GM2 Objectief. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.