Home > Audio, TV & Foto > Receivers > Sony Receivers > Sony STR-DN1080 Receiver

Handleiding Sony STR-DN1080 Receiver

Handleiding voor je Sony STR-DN1080 Receiver nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

12) Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning

storms or when unused for long periods of

time.

14) Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

NOTE:

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses and

can radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is

encouraged to try to correct the interference by

one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the

equipment and receiver.

 Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

 Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

Properly shielded and grounded cables and

connectors must be used for connection to host

computers and/or peripherals in order to meet

FCC emission limits.

To reduce the risk of electric shock, the speaker

cable should be connected to the apparatus and

the speakers in accordance with the following

instructions.

1) Disconnect the AC power cord from the

MAINS.

2) Strip 10 to 15 mm of the wire insulation of the

speaker cable.

3) Connect the speaker cable to the apparatus

and the speakers carefully so as not to touch

the core of speaker cable by hand. Also

disconnect the AC power cord from the

MAINS before disconnecting the speaker

cable from the apparatus and the speakers.

This equipment must not be co-located or

operated in conjunction with any other antenna

or transmitter.

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment and meets the FCC radio frequency

(RF) Exposure Guidelines. This equipment

should be installed and operated keeping the

radiator at least 20 cm or more away from

person's body (excluding extremities: hands,

wrists, feet and ankles).

5.47 GHz – 5.725 GHz band is restricted to indoor

operations only.

Compliance with FCC requirement 15.407(c)

Data transmission is always initiated by

software, which is the passed down through the

MAC, through the digital and analog baseband,

and finally to the RF chip. Several special packets

are initiated by the MAC. These are the only ways

the digital baseband portion will turn on the RF

transmitter, which it then turns off at the end of

the packet.

Therefore, the transmitter will be on only while

one of the aforementioned packets is being

transmitted. In other words, this device

automatically discontinue transmission in case

of either absence of information to transmit or

operational failure.

Frequency Tolerance: ±20 ppm

For the customers in Canada

Properly shielded and grounded cables and

connectors must be used for connection to host

computers and/or peripherals.

This device complies with Industry Canada’s

licence-exempt RSSs. Operation is subject to the

following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference,

including interference that may cause undesired

operation of the device.

Beoordeling

Laat ons weten wat je van de Sony STR-DN1080 Receiver vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.

Bent u tevreden over de Sony STR-DN1080 Receiver?
Ja Nee

Beoordeel dit product als eerste

0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Sony STR-DN1080 Receiver. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sony STR-DN1080 Receiver. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sony. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sony STR-DN1080 Receiver in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.