Handleiding Summit SBC56GBINKADA Tapsysteem

Handleiding

14

d.

Place the CO

2

tank and CO

2

regulator

valve

component into the cabinet and fix the

CO

2

tank

with tank bracket and retainer

(See Figure 8).

3. Install the beer keg:

Note: This unit can hold two one-sixth

barrel kegs, but not a full-size keg.

Place the beer keg into the cabinet and firmly

connect the keg’s opening to the connection

port of the mixed

ball valve.

Note: To place a keg into the cabinet, use the keg handle to move the keg to the

front of the open beer

dispenser, then carefully tip the keg so that the raised

bottom edge contacts the edge of the cabinet.

Finally, lift the keg handle to

raise the keg to the level of the floor of the cabinet and push the keg into

place.

4.

Install tap handle and beer tap:

Screw the tap handle clockwise into the beer tap to make a firm connection. Then

connect the tap to the beer

tower components and tighten with a wrench (See Figure

9).

Notes:

• When replacing the beer keg, first turn off the safety switch on the CO

2

regulator

valve and remove the

mixed ball valve to take out the keg.

• When replacing the CO

2

gas cylinder, remember to turn off the main switch of the

CO

2

gas cylinder and

the safety switch on the CO

2

regulator valve. Afterwards,

use a wrench to loosen the hexagonal nut port

connecting the CO

2

regulator valve

with the CO

2

tank. Then, using a wrench, remove the fixed bolt of the

CO

2

tank to

take out the CO

2

tank.

• During the installation process, be sure that all parts are connected tightly and that

there are no gas

leaks.

• When connecting the hose to the connection port, you can dip the ends into warm

water to make the

connection easier.

• If the high-pressure compressed gas in the CO

2

tank is not handled properly, it

could be dangerous:

o Make a note of the D.O.T. testing date on the cylinder neck before installation. If

it is more than 5 years old, don’t use the product. Return it to the gas supplier.

o Keep gas cylinder away from heat sources. Unused cylinders should be placed

upright in a cool, ventilated place (preferably at 70ᵒF).

A Note about Freestanding Installation

If you decide to install your beer cooler in a freestanding position (rather than built-in)

you will need to order a special kit, which includes a guard rail and a set of casters. Call

our Customer Help Line at 1-800-287-8799 weekdays between 8:30am and 5:00pm ET.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Summit SBC56GBINKADA Tapsysteem. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Summit. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Summit SBC56GBINKADA Tapsysteem in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Summit Tapsystemen
Meer handleidingen voor Tapsystemen

Beoordeling

Gerelateerde producten

Handleiding

Summit SBC58BLBIIFADA Tapsysteem

Handleiding

Summit SBC635M7SSHV Tapsysteem

Handleiding

Summit SBC635M7NKSSHH Tapsysteem

Handleiding

Summit SBC56GBICSSADA Tapsysteem

Handleiding

Summit SBC635MBI7NKSSTB Tapsysteem

Handleiding

Summit SBC635MBI7SSTBTWIN Tapsysteem

Handleiding

Summit SBC635MBI7NK Tapsysteem

Handleiding

Summit SBC635M7NKSSHV Tapsysteem

Gerelateerde categorieën