- Air the room in which the appliance is located for several minutes, and
- Contact the Service Department for advice.
• The more coolant there is in an appliance, the larger the room it should be
installed in. In the event of a leakage, if the appliance is in a small room, there
is the danger of combustible gases building up. For every ounce of coolant at
least 325 cubic feet of room space is required. The amount of coolant in the
appliance is stated on the data plate on the back of the appliance. It is
hazardous for anyone other than an Authorized Service Person to carry out
servicing or repairs to this appliance.
• Take serious care when handling, moving, and using the appliance to avoid
either damaging the refrigerant tubing or increasing the risk of a leak.
• Replacing component parts and servicing shall be done by factory authorized
service personnel so as to minimize the risk of possible ignition due to
incorrect parts or improper service.
SAFETY PRECAUTIONS REGARDING ELECTRICAL MATTERS
1. Do not pull on the power cord when unplugging the machine. Grasp the plug
firmly and pull it straight out of the socket. Do not pull the plug with wet hands.
2. Keep the power cord at the back of the appliance to avoid tripping accidents or
damage to the cord.
3. If the power cord is damaged or frayed, it must be replaced by a qualified
service professional.
4. Use only a standard three-hole grounded power socket rated above 10A. The
socket should not be shared with other appliances.
5. Be sure the plug fits firmly into the socket and that the socket is grounded.
6. The use of an extension cord is NOT recommended.
7. The beer dispenser requires an AC power supply of 110~120V/60Hz and pulls
a current of over 10A. The fuse or circuit breaker should be rated at 15A.
8. If the leakage of a combustible gas is detected, turn off the gas valve and
open the doors and windows. To reduce the risk of fire caused by a spark, do
not pull out the plug of the beer dispenser or of any other electrical device.
SAFETY PRECAUTIONS REGARDING CO
2
(CARBON DIOXIDE) GAS
Always connect the CO
2
cylinder to a regulator! Failure to do so may cause an
explosion resulting in possible injury or death when the cylinder valve is opened.
Never connect the CO
2
cylinder directly to the product container.
Always keep CO
2
cylinders away from heat. Store extra cylinders in a cool place
(preferably below 70°F). Securely fasten cylinders with a chain in an upright
position when storing.
Never drop or throw a CO
2
cylinder.
Always check the D.O.T. (Department of Transportation) test date on the
cylinder neck before installation. If it has been more than 5 years, do not use.
Return the cylinder to your gas supplier.
Praat mee over dit product
Laat hier weten wat jij vindt van de Summit SBC635MTWIN Tapsysteem. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.