Handleiding Sunphor BZ-R11 Thermometer

Handleiding

R11

Thank you for using the non-contact infrared

thermometer. This is a newly designed product that

is specialized in rapidly and accurately measuring

the forehead temperature. Within the product, there

are compensation function to ambient temper-

atureand self-detect function. By using this product,

human contact and the use of ear-cap are

unnecessary, thus eliminating the concern of cross

infection of ears.

1.Working Principles

Through light sensor, the infrared thermometer

can receive, collect and focus the infrared spectrum

from measured objects. Then this information will

betransferred as digital numbers by other circuits

and be shown on the screen.

2.Cautions

Please avoid the following sites while using the

product:

electro magnetic compatibility such as arc welder

and induction heater.Do not place this product to

areas with high temperature.

1)When using this product, point it to people’ s

forehead and then press the button. In order to

collect the accurate data, please make sure that this

product is close to the forehead.

2)Distance for measuring the temperature: it is

recommended that the distance between this

product and the forehead is 1cm to 10cm.

3)It is not recommended to use this product under

direct sunlight or near air vent.

4)If the forehead is sweaty, please wipe it and then

measure.

5)When the ambient temperature is changed,

please make sure that this product is used after

being placed in the new environment for at least

20 minutes.

3. Structure

IR sensor

Speaker

Battery

case

Model

selection

Measuring

Data view

4. Display content

5. Function

5.1 After power on, short press “M” key to switch

between surface model, that measuring non-

biological surface temperatures (earth logo on

display) and body model, that measuring

biological surface temperatures (female logo on

display).

5.2 After power on, short press “S” key to enter into

record data review(M on display), press “M” key

to scroll up, press “S” to scroll down.

5.3 After power on, long press “S” key into setting

up model while “F-1” showing on display, again

short press “S” key to switch among “F-2” “F-3”

“F-3”. Press “M” key to scroll up, press

“Measuring” key to scroll down.

5.4 Under power off, press “Measuring” key to

measuring temperature; Under record data

reviewing, press “Measuring” key to exit and into

measuring temperature.

5.5 F-1: Set up temperature unit, by press “M” and

“Measuring” key to switch the unit.

5.6 F-2: Set up fever alarm temperature, press “M”

to increase, press “measuring” key to decrease.

5.7 F-3: Set up temperature offset, press “M” to

increase, press “measuring” key to decrease.

5.8 F-4: Set up sound, by press “M” and “Measuring”

key to switch the sound.

6. Specification:

Measuring range: 32.0-43.0℃

Memory function: 32sets memory data

Battery: 2pcs AAA

Measuring time: About 1 second.

Measuring distance: 3~ 5cm

Measuring accuracy: ±0.2

Working temperature: 10℃ ~40

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sunphor BZ-R11 Thermometer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sunphor. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sunphor BZ-R11 Thermometer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Sunphor Thermometers
Meer handleidingen voor Thermometers

Veelgestelde vragen over Sunphor BZ-R11 Thermometer

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.