Handleiding Taylor 13989 Weegschaal

Handleiding

Measuring Tips

1. Select a consistent time of day to measure body fat. Early morning is not recommended

because the body is often dehydrated after a night’s sleep.

2. For more accurate measurement, urinate prior to testing. Refrain from diuretics, caffeine,

alcohol and other substances affecting normal hydration. Biological factors including

menstrual cycles, disease and illness may affect accuracy. Avoid taking measurements

during these times.

3. Monitoring body fat twice a month is recommended. Checking body fat too frequently is

not beneficial as changes are not noticeable. Knowing your body fat percentage helps

you set weight loss and exercise goals to achieve a healthier lifestyle.

4. This product is not

recommended for pregnant women and individuals with

pacemakers or implanted medical devices.

Care and Maintenance:

1. Do not disassemble the unit other than to replace the battery; it contains no user

serviceable parts. Damage to the unit may occur as a result of improper handling.

2. Remove battery when the unit is not used for a prolonged period of time.

3. When cleaning the unit, use only a slightly damp cloth. To remove stains, use a mild

soap. Never use detergents, excess water, treated cloths, harsh cleaning agents, or

sprays. Do not attempt to open casing (other than battery compartment) as this will

void your warranty.

4. Although your handheld body fat analyzer is designed to be maintenance-free, it

contains sensitive electronic parts. Avoid rough treatment. Do not drop, kick or

submerse the unit into liquids.

For service or repair – Do not return this unit to the retailer. Contact Customer Service

at 1-800-466-3342.

Trouble Shooting:

Display shows “LOW” - Replace the battery.

Display shows “ER. 1” - Contact error. Make sure your thumbs are positioned on the

contact bars correctly. Repeat.

Display shows “ER. 2” - Impedance cannot be measured correctly. Thumbs maybe too dry

or not enough contact to act as a conductor. Moisten thumbs and repeat.

To Recall Settings from Memory:

1. Simply press the Power button “ ” to turn the unit on.

2. Press the (▲ / ▼ ) buttons to select the memory location you wish to use.

3. Once you have selected the correct data from memory, simply press the “G”. The

display will blink “- - -“ and is ready to begin taking a body fat reading.

4. Hold the unit as described above in the “INSTRUCTIONS FOR USE” section.

To Clear Memory Settings- Simply over-write new data into the memory location following

instructions 1-6 in the “Getting Started” section.

To Turn off the Unit- Simply press the Power button “ ” to turn the unit off. The LCD

display will confirm your selection. (Note: If no buttons are pressed, the unit turns off

automatically after 60 seconds).

Battery Information

Your hand held Body Fat Analyzer has a lithium battery (3V CR2032) installed that will

provide up to 2000 readings when used in a typical fashion.

To Select Metric Setting:

1. Press the power button “ ” to turn the unit on.

2. Press both the power button “ ” and the “G” button at the same time.

3. While holding down the “G” button, remove finger from the power button “ ”.

The No. 2 will be shown on the screen.

4. Remove finger from the “G” button. You will see that the weight measurement has

changed from “lb” to “kg”.

5. The unit is now in “metric” setting.

Battery Replacement

1. Use a 3V CR2032 lithium battery only (installed).

2. Using a small coin, open the battery compartment on the bottom of the unit by turning to

the right to the “OPEN” position. Remove the cap.

3. Remove the old battery and place the new battery with “+” sign up.

4. Replace the cap and using a small coin, turn it to the left until the arrow on the cap is in

line with the arrow on the bottom in the “CLOSE” position.

Model#13989-A_IB_eng 10/7/04 3:06 PM Page 7

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Taylor 13989 Weegschaal. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Taylor. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Taylor 13989 Weegschaal in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Taylor Weegschalen
Meer handleidingen voor Weegschalen

Veelgestelde vragen over Taylor 13989 Weegschaal

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Taylor 7356 Weegschaal

Handleiding

Taylor 2020B Weegschaal

Handleiding

Taylor 4832B Weegschaal

Handleiding

Taylor 2004B Weegschaal

Handleiding

Taylor 7407 Weegschaal

Handleiding

Taylor 7556 Weegschaal

Handleiding

Taylor 5573FT Weegschaal

Handleiding

Taylor 5704 Weegschaal

Gerelateerde categorieën