Handleiding Topcom Protalker PT-1116 Walkie-talkie

Handleiding

4

Protalker 1116

6 Using a PMR 446 Mhz radio

To communicate between PMR devices they need to be set all on the same frequency +

sub-channel code and within receiving range (up to max. 10 km in ideal conditions).

Since the PT-1116 operates on licence free 446 MHz fre

quencies, all other licence free 446 MHz

PMR radio's will operate on the same radio frequencies. Therefore, privacy is not guaranteed.

Anybody with a PMR set to your radio frequency can overhear the conversation.

If you want to communicate (transmitting a voice sign

al) you need to press the PTT-button .

Once this button pressed, the device will go into transmit mode and you can speak into the

microphone. All other PMR devices in range , on the

same channel and in standby mode (not

transmitting) will hear your message. You need to wait until the other party stops transmitting

before you can reply to the message. To reply, just press the PTT-button and speak into the

microphone..

If 2 or more users press the PTT- button at the same time the receiver will

receive only the stongest signal and the other signal(s) will be supressed.

Therefore you should only transmit a signal (press PTT- button) when the

channel is free.

The range of radio waves is strongly affected by obstacles such as

buildings, concrete/metal structures, the unevenness of the landscape,

woodland, plants, humidity … This implies that the range between two or

more PMR's may in some extreme cases be restricted to a maximum of a few

tens of meters. You will soon notice that PMR works best when there is a

minimum of obstacles between users.

7 Included in the package

• 1 x Protalker PT-1116

• 1 x Beltclip

• 1 x Desktop Charger

• 1 x Power adapter

• 1 x Li-ion battery

• 1 x ECO User guide

8 Getting started

8.1 Installing the battery pack



Align the battery pack with the back of the PMR body. Press

the battery pack and PMR body firmly together until the

release latch locks up the battery.

8.2 Removing the battery pack







While pressing the release latch, pull the battery pack away

from the PMR body

8.3 Installing the belt clip







Remove the screw on the back of the radio, put the clip

button on, and fix it with the screw.

Match the grooves of the belt cli

p with the button, push the

belt clip downwards until it is locked.

8.4 Removing the belt clip







Push the spring of the belt clip supporter downwards and

push the belt clip puwards to remove it from the radio.

8.5 Installing the hand strap







Slide the small loop of the hand strap through the strap hole

on the upper rear of the PMR body.

Pull the entire hand strap through the small loop to secure

the hand strap in place.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Topcom Protalker PT-1116 Walkie-talkie. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Topcom. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Topcom Protalker PT-1116 Walkie-talkie in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Topcom Walkie-talkies
Meer handleidingen voor Walkie-talkies

Beoordeling

Gerelateerde producten

Handleiding

Topcom Twintalker 3700 Walkie-talkie

Handleiding

Topcom Twintalker 9500 Airsoft Edition Walkie-talkie

Handleiding

Topcom Twintalker RC-6411 Walkie-talkie

Handleiding

Topcom Twintalker RC-6410 Walkie-talkie

Handleiding

Topcom Twintalker 1302 Walkie-talkie

Handleiding

Topcom Twintalker 9100 Walkie-talkie

Handleiding

Topcom Twintalker 5400 Walkie-talkie

Handleiding

Topcom Twintalker 5010 Walkie-talkie

Gerelateerde categorieën