Handleiding Troy-Bilt TB4516CC Kettingzaag

Handleiding

10

STARTING/STOPPING INSTRUCTIONS

Never operate the saw

without the bar and

chain properly installed.

WARNING:

1. Fill the oil tank with correct chain and bar oil (Fig. 3).

Use a funnel, wipe up any spills and make sure no dirt

gets into the tank.

NOTE: The saw chain requires lubrication when in use to

minimize friction with the guide bar. The oil tank

holds 4.5 ozs of oil, enough to lubricate the chain

for 12-15 minutes of sawing. We recommend

using original equipment manufacturer Bar and

Sprocket Oil, which contains additives to reduce

friction wear and reduce resin residue formations.

NOTE: Your chain saw is equipped with an Automatic

Oiler system and is the ONLY source of

lubrication for the bar and chain.

2. Be certain the Chain Brake® is disengaged before

starting unit (Fig. 4). Disengage it by pulling backward

toward the motor.

3. Hook the extension cord to the extension cord retainer

(A) (Fig. 5) that is built into the rear handle. This will

prevent the cord from pulling out of the handle. Double

the extension cord, about a foot from the end, and

insert it into the end of the handle. Hook the loop

formed by doubling the cord over the tab. Gently tug

on the cord to ensure that it is firmly retained in the

saws handle. Plug the receptacle end of the extension

cord into the tool’s power supply cord.

4. Grip the saw with both hands, left hand holding the

front /handle (DO NOT HOLD CHAIN BRAKE®) and

the right hand holding the rear handle. Thumbs and

fingers should encircle both handles (Fig. 6).

5. With your right thumb, depress the LOCK/OFF button

(C) on the top of the rear handle, and at the same

time squeeze the trigger. To stop the saw, release the

trigger (Fig. 7).

NOTE: It is not necessary to maintain pressure on the

LOCK/OFF button once the trigger is squeezed

and the motor is running. The LOCK/OFF button

is a safety device to avoid accidental starting.

STOPPING INSTRUCTIONS

The saw motor will automatically stop when the trigger is

released. To restart the motor, you will have to depress

the LOCK/OFF button and squeeze the trigger.

STARTING INSTRUCTIONS

The oil tank level

should be frequently

checked during operation to avoid starving

the bar and chain of lubrication.

CAUTION:

Ensure the extension

cord is of the proper

size and type for your saw.

WARNING:

Make sure the

extension cord does

not come in contact with the guide bar and

saw chain.

WARNING:

Oil Cap

Oil Tank

Inspection Spot

A

C

Fig. 3

Fig. 5

Fig. 4

Fig. 6

Fig. 7

A

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Troy-Bilt TB4516CC Kettingzaag. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Troy-Bilt. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Troy-Bilt TB4516CC Kettingzaag in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Troy-Bilt Kettingzagen
Meer handleidingen voor Kettingzagen

Veelgestelde vragen over Troy-Bilt TB4516CC Kettingzaag

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Troy-Bilt TB4218CC Kettingzaag

Handleiding

Troy-Bilt TB4920CC Kettingzaag

Handleiding

Troy-Bilt TB4016CC Kettingzaag

Handleiding

Troy-Bilt TB4620CC Kettingzaag

Handleiding

Troy-Bilt TB3516 Kettingzaag

Handleiding

Stihl GTA 26 Kettingzaag

Handleiding

Parkside IAN 327520 Kettingzaag

Handleiding

Greencut OH650X Kettingzaag

Gerelateerde categorieën