Handleiding Troy-Bilt TB4516CC Kettingzaag

Handleiding

4

RULES FOR SAFE OPERATION

• Do not operate a chain saw that is damaged,

improperly adjusted, or not completely and securely

assembled. Be sure that the saw’s chain stops moving

when the throttle control trigger is released.

• Use extreme caution when cutting small-sized brush

and saplings because slender material may catch the

chain saw and whip towards you or pull you off

balance.

• When cutting a limb that is under tension, be alert for

springback so that you will not be struck when the

tension in the wood fibers is released

• Do not cut through nails, rods in the tree, railroad ties

or pallates. Inspect a tree that you are going to cut for

foreign objects that could cause injury or damage to

your chain saw.

• After striking a foreign object, stop the motor and

thoroughly inspect for damage. Repair as necessary.

• We do not recommend using the chain saw in a tree or

on a ladder.

• All chain saw service, other that the items listed in this

instruction manual maintenance instructions, should be

performed by competent chain saw service personnel.

• Use the right tool. Only use this chain saw for its

intended purpose, to cut wood.

• Do not overreach. Always keep proper footing and

balance.

• Always hold the unit with both hands when operating.

Keep a firm grip on all handles or grips.

• Apply chain brake prior to any repositioning of the

operator in the cutting area. As an additional safety

precaution, apply the chain brake prior to setting down

the saw.

• Never touch the chain or attempt to service the saw

while the motor is running. Make sure all moving parts

have stopped. Allow the chain saw to cool, as the

chain can be hot.

• Check the bar and chain at frequent intervals for

proper adjustment. Make sure the bar and chain are

properly tightened and sharpened. Visually inspect for

damage. Repair any damage before restarting or

operating the chain saw.

KICKBACK SAFETY PRECAUTIONS

• With a basic understanding of kickback, you can

reduce or eliminate the element of surprise. Sudden

surprise contributes to accidents. Be alert to the

potential for kickback at all times.

• Keep a good firm grip on the saw with both hands, the

right hand on the rear handle and the left hand on the

front handle, when the motor is running. Use a firm grip

with thumbs and fingers encircling the chain saw

handles. A firm grip will help you reduce kickback and

maintain control of the saw. Don’t let go.

• Make sure that the area in which you are cutting is free

from obstructions. Do not let the nose of the guide bar

contact a log, branch, fence, or any other obstruction

that could be hit while you are operating the saw.

• Always cut with the motor running at full speed. Fully

squeeze the throttle trigger and maintain a steady

cutting speed.

• Use only the correct original equipment manufacturer

replacement bars, chains and other parts and

accessories. These are available from your authorized

service dealer. Use of any unauthorized parts or

accessories could lead to serious injury to the user, or

damage to the unit, and will void your warranty.

• Follow the manufacturer’s sharpening and

maintenance instructions for the saw chain.

• Use only the replacement guide bars and low kickback

chains specified for your saw to avoid injury.

KICKBACK may

occur when the nose

or tip of the guide bar touches an object, or

when the wood closes in and pinches the

saw chain in the cut. Tip contact in some

cases may cause a lightning-fast reverse

reaction, kicking the guide bar up and back

towards the operator. Pinching the saw chain

along the top of the guide bar may push the

guide bar rapidly back toward the operator.

Either of these reactions may cause you to

lose control of the saw, which could result in

serious personal injury.

Do not rely exclusively upon the safety

devices built into your saw. As a chain saw

user, you should take several steps to keep

your cutting jobs free from accident or injury.

WARNING:

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Troy-Bilt TB4516CC Kettingzaag. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Troy-Bilt. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Troy-Bilt TB4516CC Kettingzaag in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Troy-Bilt Kettingzagen
Meer handleidingen voor Kettingzagen

Veelgestelde vragen over Troy-Bilt TB4516CC Kettingzaag

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Troy-Bilt TB4218CC Kettingzaag

Handleiding

Troy-Bilt TB4920CC Kettingzaag

Handleiding

Troy-Bilt TB4016CC Kettingzaag

Handleiding

Troy-Bilt TB4620CC Kettingzaag

Handleiding

Troy-Bilt TB3516 Kettingzaag

Handleiding

Stihl GTA 26 Kettingzaag

Handleiding

Parkside IAN 327520 Kettingzaag

Handleiding

Greencut OH650X Kettingzaag

Gerelateerde categorieën