Handleiding Truma Trumove T Caravanmover

Handleiding voor je Truma Trumove T Caravanmover nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

8
Installation instructions
Read the installation instructions prior to starting work and
follow them carefully!
Please ensure that no metal chips or other contaminants get
into the controller during installation.
In the case of screws with sealants, steps must be tak-
en to ensure that the thread is free of grease / oil.
Intended use
The Trumove S is designed for use on single-axle caravans
with a gross weight of up to 2000 kg,
and the Trumove T is designed for use on dual-axle caravans
with a gross weight of up to 2250 kg.
The Trumove S / T weighs approx. 33 kg.
Check the towing load of your vehicle and the gross weight of
your caravan in order to establish whether they are designed
for the additional weight.
Approval
The Trumove S / T satisfies other requirements stated in the
EC directives and standards (see declaration of conformity).
The technical and administrative regulations of the country in
which the vehicle is initially registered must be complied with
when the Trumove S / T is being installed.
Any modifications to the unit or the use of spare parts and
accessories that are important to the operation of the system
that are not original Truma parts and failure to follow the in-
stallation and operating instructions will cancel the warranty
and indemnify Truma from any liability claims. In addition to
this, the operational approval for the device will be cancelled.
Tools and facilities required
To install the unit you will need
13 mm, 17 mm socket wrench, ring spanner or
open-jawed spanner
Allen key 4
Torque wrench (5 – 50 Nm)
Cable cutter / Crimping tool
Power drill / screwdrivers / 25 mm hole cutter
Portable 2 tonne trolley jack and axle stands to suit
Appropriate lighting
Minimum installation dimensions
A distinction is made between L-profiled and U-profiled
chassis as shown in the illustration.
Caravan floor
L-profiile
U-profile
max. 20
Fig. 6
The equipment can only be fitted to caravans / trailers within
the following dimensions.
min.
170*
min. 1200 / max. 2000
min. 50 / max. 180
min. 25
min. 35 **
170
min. 2.8
Caravan floor
Fig. 7
All dimensions in mm.
* for a loaded vehicle with a max. allowed gross weight
** for U-profile
Measuring the frame height
A frame height of min. 170 mm is required about 340 mm
from the outer edge of the tyre at the height of the wheel
hub / centre.
340
min. 170
Fig. 8
Determining the installation type
1. Standard installation
Standard installation for chassis with a U or L-profile and a
frame height of min. 170 mm. No special accessories are
required.
2. Installation in a chassis with a U or L-profile and
frame height between 110 mm and less than 170 mm
The spacer set 30 mm (up to 140 mm frame height) or spacer
set 60 mm (less than 140 mm frame height) is required to
compensate for the height difference.
3. Installation with chassis with U-profiles or L-profiles
with frame height of less than 110 mm
A low chassis kit needs to be used to compensate for
the height difference for chassis with a height of less than
110 mm.
4. The AL-KO Vario III / AV installation kit must be used
with the AL-KO Vario III / AV chassis with a frame thickness of
less than 2.8 mm.
5. For attachment in front of the axle on the
AL-KOchassis M with adjustable beams
The AL-KO chassis M adapter set (part no. 60030-38600)
must be used in order to compensate for overlapping frame
edges
6. For attachment in front of the axle on the
AL-KOchassis M with continuous frame
The AL-KO chassis M adapter set (part no. 60031-02000)
must be used in order to compensate for overlapping frame
edges
7. Installation with Eriba Touring chassis
The Eriba Touring mounting set is needed for the
Eriba Touring chassis.
8. For attachment behind the axle on the
EribaTrollchassis
The Eriba Troll mounting set is needed for the Eriba Troll
chassis.
9. Installation on chassis with L-profile and with a lim-
ited amount of space
The short mounting system is required to compensate for
the height (30 or 60 mm) with substructures such as tanks.
Download de handleiding in het Nederlands en/of Engels (PDF, 3.63 MB)
(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Truma Trumove T Caravanmover. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Truma. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Truma Trumove T Caravanmover in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk Truma
Model Trumove T
Categorie Caravanmovers
Bestandstype PDF
Bestandsgrootte 3.63 MB

Alle handleidingen voor Truma Caravanmovers
Meer handleidingen voor Caravanmovers

Beoordeling

Laat ons weten wat je van de Truma Trumove T Caravanmover vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Bent u tevreden over de Truma Trumove T Caravanmover?
Ja Nee
Beoordeel dit product als eerste
0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Truma Trumove T Caravanmover. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Handleiding Truma Trumove T Caravanmover

Gerelateerde producten

Gerelateerde categorieën