Handleiding Tryton TMT810B Bandschuurmachine

Handleiding

4

INSTRUCTION MANUAL

BELT SANDER:

Original text translation

TMT810A, TMT810B

BEFORE YOU START USING THE MACHINE READ

THOROUGHLY THIS MANUAL.

Keep this document for future reference.

WARNING! Read all safety warnings marked with a

symbol and all operating safety instructions.

WARNING! General warnings regarding the use of

power tools.

Electric safety:

WARNING! General warnings regarding the use of

power tools.

Use and taking care of your power tool:

a) Do not overload your power tool. Use a power tool with

power adjusted to work being done. An appropriately chosen

power tool will allow you to work better and safer under load it has

been designed for.

b) Do not use a power tool when its power switch is out of order

(it does not switch it on or off). Any power tool with its power

switch out of order is dangerous and must be repaired.

c) Always disconnect the plug from the power source and/or

disconnect its battery before changing any settings,

performing replacement or storage. Such preventive measures

reduce the risk of accidental power tool start up.

WARNING! General warnings regarding the use of

d) Keep your power tool out of reach of children and do not

power tools.

allow unauthorized persons to use the power tool. Power tools

Personal safety:

in hands of untrained persons can be dangerous.

To limit the risk of fire, electric shock and injury while using the device,

follow all operating safety instructions and tips provided below.

Keep all work safety instructions and tips for future reference.

In warnings provided herein the expression “power tool” means a power

tool powered from the mains (with a power cord) or a battery powered

power tool (cordless).

WARNING! General work safety warnings for use of

the tool.

Workplace safety:

a) Keep your workplace tidy and well lit. Untidiness and bad lighting

result in higher accident rate.

b) Do not use the power tool in explosive environments, created

by flammable liquids, gases or dusts. The power tool generates

sparks that can ignite dust or vapors.

c) Keep children and unauthorized persons away from the place

where the power tools are used. Inattention may result in losing

control over your power tool.

a) Plugs used in power tools must match wall outlets. Never

modify the plug of your power tool. Do not use any extension

c ab les when o pe rating a power tool with a

grounding/earthing conductor (PE). Any modifications of plugs

and outlets increase the risk of electric shock.

b) Avoid touching earthed surfaces or grounded items like

pipes, heaters, central heating radiators and refrigerators.

Touching earthed or grounded surfaces increases the risk of electric

shock.

c) Do not expose your power tool to rain or damp environments.

Water penetrating the tool increases the risk of electric shock.

d) Do not damage the power cord. Never use the power cord to

carry, pull the power tool and do not pull by its power cord to

disconnect plug from the outlet. Keep the power cord away

from sources of heat, oils, sharp edges and moving parts.

Damaged or entangled power cords increase the risk of electric shock.

e) When your power tool is operated outdoors use extension cords

intended for outdoor use only. Using an extension cable intended for

outdoor use decreases the risk of electric shock.

f) When it is unavoidable to use your power tool in a damp

environment use an RCD (Residual Current Device) for

protection. The use of RCDs decreases the risk of electric shock.

a) This equipment is not intended for use by persons (including

children) disabled physically , mentally, sensorial or persons

with no experience and knowledge in operating the

equipment unless they operate the equipment under

supervision or follow user's instructions provided by persons

responsible for their safety.

b) It is necessary to predict steps, watch and keep common

sense when using power tools. Do not operate power tools

when you are tired, under influence of drugs, medicine or

alcohol. A moment of inattention while operating a power tool may

result in serious personal injury.

c) Use personal protective equipment (PPE). Always wear safety

goggles. Wearing personal protective equipment (PPE) including a

dust mask, anti-slippery footwear, a helmet and ear protection reduces

personal injury.

d) Avoid unexpected start up. Before connecting your power

tool to the mains and/or inserting a battery make sure its

power switch is in off position. Carrying your power tool with a

finger on its power switch or without disconnecting it from the mains

(switched on) may result in an accident.

e) Before starting your power tool remove any keys/wrenches.

Leaving a key/wrench in the rotating part of your power tool may result

in personal injury.

f) Do not lean forward too far. Always remain stable and

maintain balance. It will allow you to have a better control over your

power tool in unpredictable situations.

g) Wear appropriate clothing. Do not wear loose clothes or

jewelry. Keep your hair tied. Keep your clothes away from

moving parts. Loose clothes, jewelry or long hair may be caught by

moving parts.

h) If your power tool allows for using an external dust

extraction or collection system, make sure it is connected

and used properly. Using dust collectors may reduce dust

affected risks.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Tryton TMT810B Bandschuurmachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Tryton. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Tryton TMT810B Bandschuurmachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Tryton Bandschuurmachines
Meer handleidingen voor Bandschuurmachines

Veelgestelde vragen over Tryton TMT810B Bandschuurmachine

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Tryton TMT810A Bandschuurmachine

Handleiding

Lumber Jack EBS76 Bandschuurmachine

Handleiding

Clarke CAT 165 Bandschuurmachine

Handleiding

Greencut LJ400C Bandschuurmachine

Handleiding

Ryobi P450 Bandschuurmachine

Handleiding

Ryobi BD4601G Bandschuurmachine

Handleiding

Clarke CS 4-6D Bandschuurmachine

Handleiding

Clarke CS 4-8 Bandschuurmachine

Gerelateerde categorieën