Handleiding Vango Solero 500 Tent

Handleiding

IF YOU HAVE ANY PROBLEMS PLEASE CONTACT YOUR LOCAL RETAILER or

AMG Group Ltd., Kelburn Business Park, Port Glasgow, Scotland. PA14 6TD.

UK Consumer Hotline: 0844 811 0535 E-Mail: inf[email protected]o.uk

Calls to our Customer Hotline cost 5p per minute. Calls from mobile phones, cable networks or public payphones will generally cost more.

FLYSHEET FIRST PITCHING – the groundsheet is sewn-in

•

••

• Assemble poles and lay them parallel on the ground:

4 poles: 2 long poles for the main dome

1 medium pole for the bedroom

1 small brow pole.

The poles are colour coded to match

corresponding pole sleeve entry points.

•

••

• Open out flysheet and position in required direction.

•

••

• Insert the poles through the colour coded pole sleeves on

the outside of the flysheet.

•

••

• Locate one end of each pole on one side of flysheet, into

the metal pin system at the end of the pole sleeves.

Make sure poles locate into correct pin system (all poles

follow corresponding flysheet seams to pin system).

•

••

• To avoid excess strain on poles and tent material,

it is advisable to have assistance to hold diagonal

poles upright when forming arch.

•

••

• Push poles into an arch from opposite ends and locate

pole ends into corresponding metal pin.

•

••

• Clip all flysheet pole clips to inserted poles

•

••

• Start pegging out the tent using the main corners at the

rear of the tent using the steel v-channel pegs

•

••

• Pull the tent forward until taught and peg out the main

corners at the front of the tent, again with the steel v-

channel pegs

•

••

• The groundsheet should be flat and wrinkle free.

•

••

• Secure the tent using the pin pegs through the ring and

pin system – see diagram 2.

•

••

• Peg out flysheet fillets to tension flysheet.

•

••

• Peg out ALL guy lines using pin-pegs ensuring that

guy line fabric attachment points are evenly

tensioned.

•

••

• Inside the tent insert brow pole through white ring in

roof above door of inner.

•

••

• Locate pole ends in metal rings

INNER ATTACHMENT

•

••

• Open out inner tent inside flysheet and position

doorway to correspond with the living area.

•

••

• Starting from the rear corners of the tent, attach

the elasticated hooks on the groundsheet to

corresponding rings on the flysheet anchor

straps.

•

••

• Suspend the inner by attaching toggles of inner

tent through rings on inside of flysheet. Do the

rear first and work forward.

•

••

• Finally, connect the three parts of the pelmet

using the hook and loop tabs.

Figure 1. Figure 2.

Tent Pitching Instructions

–

Solero 500

Ring and Pin System

1. Locate one end of each pole onto the corresponding metal pin. The metal pin inserts into the hollow metal

ferrule on the end of each pole. (See Figure 1). Push the pole into a curve from the opposite side, one at a

time, and locate all pole ends onto the metal pins.

2. Peg the corners of the tent through the metal rings using pin-pegs. It is important to drive the peg into the

ground at a 45 degree angle to obtain the best grip. (See Figure 2).

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Vango Solero 500 Tent. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Vango. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Vango Solero 500 Tent in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Vango Tenten
Meer handleidingen voor Tenten

Veelgestelde vragen over Vango Solero 500 Tent

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.