Handleiding Vemer Klima 2 Thermostaat

Handleiding

User Manual

AMBIENT GAS MEMBRANE THERMOST

Read all the instruction carefully

■ This thermostat is designed for automatic regulation of heating and

conditioning systems in houses, hotels, schools, offices, workshops and many

other environments, both domestic and industrial. It is also ideal for heating

and air conditioning numerous industrial and civil applications.

SAFETY WARNINGS

■ During installation and operation of the device, it is necessary to comply

with the following instructions:

1) The device must be installed by a skilled person, in strict compliance with

the connection diagrams

2) Do not power on or connect the device if any part of it is damaged

3) After installation, inaccessibility to the connection terminals without

appropriate tools must be granted

4) The device must be installed and activated in compliance with current

electric systems standards

5) Before accessing the connection terminals, verify that the leads are not live

Code Model Contact Functions

VE018800 KLIMA 2 NA -

VE019600 KLIMA 3 NA + NC -

VE020400 KLIMA 3L NA + NC Power on warning lamp

VE021200 KLIMA SI NA + NC ON/OFF + Power on warning lamp

VE022000 KLIMA IN NA + NC ON/OFF

VE023800 KLIMA SW NA + NC Summer/Winter

VE024600 KLIMA 2V NA + NC 2 speed + Summer/Winter/OFF

VE268900 KLIMA 3V NA + NC 3 speed + OFF

TECHNICAL SPECIFICATIONS

• Free mounted single-pole mechanical thermostat

• Setting range: +5 / +30°C

• Differential: Δt ≤ 1°C

• Capacity of the contacts: 16(2,5)A 250V ~ for models KLIMA 2 e KLIMA 3

10(1,5)A 250V ~ for models KLIMA 3L, KLIMA SI, KLIMA IN,

KLIMA SW, KLIMA 2V, KLIMA 3V

• Thermal gradient: 1°C / 15 min.

• Sensitive element: vapour expansion lung

• Class I equipment

• Protection degree: IP20

• Type of action: 1B

• Silver contacts 1000/1000

• Break or switching contacts

• Pollution degree: 2 (normal)

• Voltage pulse: 4kV

• Operating temperature: 0 ÷ 40°C

• Operating humidity: 20 ÷ 90 %RH noncondensing

INSTALLATION

■ You are advised to position the thermostat as far as possible in a place that reflects the

average temperature of the whole area. Avoid positioning it near doors, windows, sources

of heat and in places where there is too much or too little ventilation.

The thermostat should be fitted at approximately 1.5 m from the ground.

1) The thermostat can be fitted to the flush-mounting box of the electric system (centre

distance 60 mm) or directly to the wall (centre distance 60 mm);

2) Remove the knob, unscrew the screw of the cover and remove it as shown in the drawing;

3) a) fix the base to the wall

b) connect the thermostat earth by using the terminal marked with the earth symbol

c) follow the wiring diagram inside the cover; fix the flexible inseparable wires to the

relative screw terminals

d) replace the cover, screws and knob.

USER’S GUIDE

1) Set the temperature required by turning the knob;

2) To limit the setting field:

a) Isolate the power supply line

b) Remove the knob

c) Insert the limit markers in the housing

under the knob (17°C ÷ 23°C

d) Return the knob to its housing.

REFERENCE STANDARDS

Conformity with EU directives:

2014/35/EU (LVD)

2014/30/EU (EMCD)

is declared with reference to the following standard:

■ EN 60730-2-9: Automatic electric command devices for household and similar use.

Part 2: particular provisions for thermosensitive command devices.

ISCOM004-1604

Mod. KLIMA

DIMENSIONS

INSTALLATION

CONNECTIONS

Vemer S.p.A.

I - 32032 Feltre (BL) • Via Camp Lonc, 16

Tel +39 0439 80638 • Fax +39 0439 80619

e-mail: info@vemer.it - web site: www.vemer.it

KLIMA 2

T

+°C

16(2,5)A 250V~

N

L

KLIMA 3

T

+°C

16(2,5)A 250V~

N

L

KLIMA 3L

T

+°C

10(1,5)A 250V~

N

L

KLIMA IN

ON OFF

T

+°C

N

L

10(1,5)A

250V~

KLIMA SI

ON OFF

T

+°C

N

L

10(1,5)A

250V~

KLIMA SW

T

+°C

N

L

10(1,5)A

250V~

KLIMA 2V

OFF

I

II

T

+°C

N

L

10(1,5)A

250V~

KLIMA 3V

T

+°C

III

OFF

I

II

N

L

10(1,5)A

250V~

83,7

76,5

82,9

60

60

31

39

Note:

for “heating” operation

mode, remove the cable

terminal which is inside

the device from terminal

3 to teminal 2.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Vemer Klima 2 Thermostaat. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Vemer. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Vemer Klima 2 Thermostaat in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Vemer Thermostaten
Meer handleidingen voor Thermostaten

Veelgestelde vragen over Vemer Klima 2 Thermostaat

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.