Handleiding Visioneer RoadWarrior Lite Scanner

Handleiding

PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE EXPRESSLY EXCLUDED. AS A RESULT, EXCEPT AS SET OUT ABOVE, THE PRODUCT IS SOLD

“AS IS” AND YOU ARE ASSUMING THE ENTIRE RISK AS TO THE PRODUCT'S SUITABILITY TO YOUR NEEDS, ITS QUALITY AND ITS PERFORMANCE.

IN NO EVENT WILL VISIONEER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY

DEFECT IN THE PRODUCT OR FROM ITS USE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

All exclusions and limitations in this warranty are made only to the extent permitted by applicable law and shall be of no effect to the extent in

conflict with the express requirements of applicable law.

RoHS and WEEE Compliance

This product is compliant with RoHS Regulations of the European Parliament and Council Directive on the Restrictions of the Use of Certain

Hazardous Substances in Electrical and Electronic Equipment (2002/95/EC), and with the Waste Electrical and Electronic Equipment (WEEE)

Directive (2002/96/EC).

FCC Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for the class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and if not installed, and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain

compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded

cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the

equipment without the approval of manufacturer could void the user's authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

E

NERGY STAR for the USA

Energy Program compliance

As an E

NERGY STAR® partner, Visioneer Inc. has determined that this product meets the ENERGY STAR guidelines for energy

efficiency.

The E

NERGY STAR and ENERGY STAR MARK are registered United States trademarks. The ENERGY STAR Imaging Equipment Program is a

team effort between the U.S., European Union and Japanese governments and the office equipment industry to promote

energy-efficient copiers, printers, fax, multifunction machine, personal computers, and monitors. Reducing product energy

consumption helps combat smog, acid rain and long-term changes to the climate by decreasing the emissions that result from generating

electricity.

Visual Display

Warning: This device is not intended for use in the direct field of view at visual display workplaces. To avoid incommoding reflections at visual

display workplaces, this device must not be placed in the direct field of view.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Visioneer RoadWarrior Lite Scanner. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Visioneer. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Visioneer RoadWarrior Lite Scanner in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Visioneer Scanners
Meer handleidingen voor Scanners

Veelgestelde vragen over Visioneer RoadWarrior Lite Scanner

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Visioneer Mobility Air Scanner

Handleiding

Visioneer Strobe 500 Scanner

Handleiding

Visioneer RoadWarrior 3g Scanner

Handleiding

Visioneer RoadWarrior 3 Scanner

Handleiding

Visioneer Mobility Scanner

Handleiding

Visioneer Patriot 430 Scanner

Handleiding

Medion Scanner (MD 90093) Scanner

Handleiding

HP Scanjet 7000 Scanner

Gerelateerde categorieën