Handleiding Watts BT DPRF-01 Thermostaat

Handleiding

13

- Now your thermostat will propose you to adjust the

current time and date.

2.2 Time and Date adjustment

Each time a value blinks, you can adjust it with the

(-) and (+) keys, once the value is chosen, validate

it with the (OK) key. The thermostat will jump

automatically to the next value.

Note: you can always come back to the previous

value by pressing the escape key ().

List order of the time and date adjustments:

Time and day:

Adjustment of the hours,

Adjustment of the minutes

Adjustment of the day (1 = Monday)

Date:

Adjustment of the day number

Adjustment of the month number (01 to 12)

Adjustment of the year (Century)

Adjustment of the year

14

Then the message “Save” and blinking green LED

appears, press (OK) to validate the adjusted time

and date.

You can always reach the time and date

adjustments, by pressing and maintaining the

edition () key during 2 seconds in normal

operating modes.

2.3 RF installation

- First of all to configure your thermostat with the

receiver, you must put your receiver in « RF init ».

mode. (please refer to the receiver leaflet for this,

only the RF receiver of the same range are

compatibles)

- Now on the thermostat press and maintain the

edition key () during 10s, then the parameter «

ini » must be display.

15

The thermostat will send now the radio

configuration signal to the receiver.

- On the receiver check the good reception

(generally showed by a green LED blinking). Once

the configuration between the receiver and the

thermostat made, press on the escape key ( ) to

come back to the main screen.

- Now you can check the RF distance, go to the

room which must be regulated. Put your thermostat

on the final position (On the wall or table...), then

put the thermostat in Comfort mode (setting

temperature position 37°C). Close the door and go

to the receiver to check if the new status of the

16

thermostat has received. (The heating is generally

showed by a Red LED).

- Now return to the thermostat and switch off it.

Check on the receiver again if it’s also switched off

(The red LED must be turned off)

o If the RF signals were received correctly,

adjust your setting temperature as you want.

o If the RF signals weren’t received correctly,

check the installation (Receiver position,

distance...)

* To make the installation easier it will be better to

have the thermostat near to the receiver during the

configuration mode. (A minimal distance of >

1meter must be respected)

17

2.4 Starting

The thermostat is now ready to works.

The default working mode will be automatic

with a standard built-in program “P1”.

Monday to Friday

20°C

18°C

07:00 09:00 17:00 23:00

Saturday & Sunday

20°C

18°C

08:00 23:00

18

Note:

You can customise your program as you want, See

the next part “Working mode definition” chapter

“Program” for more explanation.

At any time, when the backlight is extinct, press the

(OK) key to lit-up the backlight,

and then press another time the (OK) key to show

the current setting temperature.

Curent stage

of the program

Curent time

Program

followed

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Watts BT DPRF-01 Thermostaat. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Watts. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Watts BT DPRF-01 Thermostaat in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Watts Thermostaten
Meer handleidingen voor Thermostaten

Veelgestelde vragen over Watts BT DPRF-01 Thermostaat

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Watts BT-DRF-02 Thermostaat

Handleiding

Watts BT 051 Chrono Battery Thermostaat

Handleiding

Watts BT-DPRF-02 Thermostaat

Handleiding

Watts BT 050 Chrono Battery Thermostaat

Handleiding

Siemens RDH100RF/SET Thermostaat

Handleiding

Olympia HT 430-23A Thermostaat

Handleiding

AlpicAir TH-1732C Thermostaat

Handleiding

Adax Multi Digital DT Thermostaat

Gerelateerde categorieën