Handleiding Westinghouse WHG954SC Kookplaat

Handleiding

13GAS CONNECTION

OPERATION ON N.G./S.N.G.GAS CONNECTION

WARNING

CAUTION

This appliance is supplied for use with Natural Gas.

However, it can be converted for use with LPG.

Refer to LP conversion on pages 12 and 13.

Supply pipe sizing

The total hourly gas consumption for the appliance is

shown on the data label. The required supply pressure

(i.e. at inlet to appliance regulator) for each gas type

is shown on the data label, and given in Technical Data

table. Use this information in conjunction with the length

of run, number of elbows, tees and bends, the available

service pressure and the supply requirements of other

installed appliances to determine a suitable pipe size. For

assistance in this matter refer to the appropriate section

of AS/NZS 5601.1 or AS/NZS 5601.2.

An AGA certified class B or D flexible connection may be

used to connect the cooktop in accordance with AS/

NZS 5601.1, in particular section 5.9 and clause 6.10.1.8,

or AS/NZS 5601.2, in particular section 2.11. Where

a hose assembly is used and the cooktop is in the

installed position, the hose assembly shall be suitable

for connection to a fixed consumer piping outlet located

at a point 800 – 850mm above the floor and in the

region outside the width of the appliance to a distance

of 250mm. The point of connection to consumer piping

must be accessible with appliance installed.

Elbow positioning

It is possible to reposition the elbow if required by

loosening the locking nut and elbow by using two

spanners. Re-tighten the entire assembly after the elbow

has been repositioned. When fitting elbow to appliance,

ensure that the sealing washer is fitted.

Regulator

An appliance regulator is provided. The regulator must be

positioned so that the pressure test nipple is accessible

when the appliance is installed. Connect the gas supply to

the ” B.S.P. internal thread inlet of the regulator. Refer to

‘bench cutout’ (Figure 4) for connection point position.

Assembly of Regulator

The assembly of the regulator to the cooktop manifold

is achieved via the elbow union and sealing washer

supplied, refer to figure 9 (page 11).

The

” parallel thread connects to the manifold,

and the sealing washer is placed between the

manifold end and the flat face on the elbow.

The

” tapered thread connects to the outlet of the

regulator, and is sealed on the thread using approved

thread sealing tape or approved thread sealing

compound.

The inlet of the regulator is a

” parallel thread and

is connected to consumer piping or hose assembly.

Regulators are supplied pre-adjusted and configured

by the component maker for use with Natural Gas.

The appliance installer is not required to make an

adjustment to obtain the correct outlet pressure setting.

An arrow on the base of the regulator indicates the

direction of gas flow when the inlet and outlet of the

regulator is orientated correctly. When the regulator

has been fitted check for leaks from the connections

with soapy water.

Checking the gas supply

1. Check the manometer zero point is correct.

2. Connect the manometer to the cooktop pressure

point. This is located on the regulator.

3. Turn on the gas supply and electricity and try to

ignite the gas.

TIPS & INFORMATION

IMPORTANT

It will take additional time to light the gas for the first

time as air needs to be purged from the pipes.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Westinghouse WHG954SC Kookplaat. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Westinghouse. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Westinghouse WHG954SC Kookplaat in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Westinghouse Kookplaten
Meer handleidingen voor Kookplaten

Veelgestelde vragen over Westinghouse WHG954SC Kookplaat

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Westinghouse CHG956SB Kookplaat

Handleiding

Westinghouse WHC942BC Kookplaat

Handleiding

Westinghouse WHG953SC Kookplaat

Handleiding

Westinghouse WHI635BE Kookplaat

Handleiding

Westinghouse WHI954BA Kookplaat

Handleiding

Westinghouse WHG643SA Kookplaat

Handleiding

Westinghouse WHI634BA Kookplaat

Handleiding

Westinghouse WHS642WC Kookplaat

Gerelateerde categorieën