16 17USING YOUR OVENUSING YOUR OVEN
Setting the cooking duration
1. Select the desired oven and
. The oven indicator light will appear and the
heating source will switch on.
2. Press until the indicator symbol
begins flashing.
3. Set the cooking duration by using or
symbols while the
indicator symbol
is flashing.
4. After 5 seconds from the last change, the
indicator symbol will stop flashing,
and the time of day will be displayed.
NOTE: Do not forget to add pre-heating time if necessary.
Setting the cooking end time
1. Select the desired oven and .
2. Press
until the indicator symbol
begins flashing.
3. Enter the time of day to finish cooking by pressing
or
symbols while the indicator symbol
is flashing.
4. After 5 seconds from the last change, the
indicator symbol
will stop flashing and the current
time of day will be displayed.
Setting the delayed start cooking time
1. Program the and as described in
the relevant sections. Once both the
and
have been set, the and
indicators will stop flashing and the current time of
day will be displayed.
NOTE: Do not forget to add pre-heating time if necessary.
To check or cancel settings settings
1. To check your settings, press until the indicator
symbol flashes next to the mode ( ,
etc) that you want to display. After 5 seconds from
the last change, the indicator will stop flashing and
the time of day will be displayed.
2. To cancel “delayed start”, press
until the
indicator symbol flashes next to . Press and
hold and symbols together until the current time
of day is displayed.
3. To cancel a setting, press “Mode” until the indicator
symbol flashes next to the setting to be cancelled.
Press and hold
and symbols together until the
setting is cleared.
On completion of cooking
When the set time has elapsed, the oven will turn off,
the timer will beep and the and/or
indicators will flash.
1. Turn the
and controls to the off
position.
2. Press
or symbols or to stop the clock from
beeping.
Switching the clock display ON and OFF
1. Press together and symbols for 3 seconds to
switch off the display.
2. Press together
and symbols for 3 seconds to
switch the clock display on again.
NOTE: If a timer mode is set, then it is not possible to
switch the display off.
Operating the Electronic Clock (WVEP615)
General features
The oven is equipped with an electronic clock that can
be used to turn the oven on and off automatically. The
function automatically turns the oven off after
a set amount of time. The function is used to
set the time of day you want the cooking cycle to finish.
A “Delayed start” is possible by combining the
and features to switch the oven on and off at a
specific time during the day.
Setting the time of day (after electrical connection):
1. After the appliance has been electrically connected,
“12” and the “Set Clock” symbol
will flash.
2. To set the time of day “Hours” press the
or
buttons while the “Set Clock” symbol
is flashing.
3. Press the
button and the time of day “Minutes”
will flash and can be set in the same manner.
4. After 5 seconds from the last change, the clock
display will stop flashing, confirming the time is set.
NOTE: The clock has a 24-hour display.
Changing the time of day
1. Press button until the “Set clock” symbol
begins to flash on the clock display.
2. To set the time of day “Hours” press the
or
buttons while the “Set Clock” symbol
is flashing.
3. Press the
button and the time of day “Minutes”
will flash and can be set in the same manner.
4. After 5 seconds from the last change, the clock
display will stop flashing, confirming the time is set.
NOTE: The clock has a 24-hour display.
USING YOUR OVEN (CONTINUED)
5. After 5 seconds from last change, the symbol
will stop flashing confirming the cooking end time
is set.
6. The “Cooking end time” will be shown on the display.
7. When the set time has elapsed, a signal will sound
and the oven will turn off. To stop the signal, press
any button on the clock and then turn the oven
selector to “Off”.
NOTE: Cooking end time cannot be set for the Rapid Heat
function. The cooking duration can be cancelled at any
time by turning the “Function” selector to “Off”.
Setting the delayed start cooking time
1. Program the and as described in
the relevant sections. Once both the
and
have been set, the and
indicators will stop flashing and the “Set temperature”
will be displayed.
NOTE: Do not forget to add pre-heating time if necessary.
Delayed start cooking time cannot be set for the Rapid
Heat function. The delayed start cooking time can be
cancelled at any time by turning the “Function” selector
to “Off”.
Setting the minute minder
1. Press the button and the “Minute minder” symbol
begins to flash.
2. Set the countdown time “Seconds” by using
and
buttons while the minute minder symbol
is flashing.
3. Press the
button and the countdown time
“Minutes” will flash and can be set in the same
manner.
4. Press the
button and set the countdown time
“Hours” will flash and can be set in the same manner.
5. After 5 seconds from the last change, the “Minute
minder” symbol
will stop flashing confirming it has
been set.
6. Once the set time has elapsed, a signal will sound for
1 minute. The time indication “0.00” and a flashing
“Minute minder” symbol
will appear on the display.
7. To stop the signal, press any button on the clock.
8. To cancel the minute minder, press the
button and
the display will flash. Then press and hold and
buttons together until the minute minder
is cleared.
NOTE: This feature has no effect on the oven operation.
With the oven “Off’ and minute minder operating, the time
of day cannot be displayed.
Elapsed time
When an oven function is selected (other than pyrolytic
clean), after 5 seconds the “Elapsed time” is displayed.
1. To reset the “Elapsed time”, press and hold both the
and buttons until the timer is reset.
Setting the oven function
1. Turn the oven selector clockwise to select
the desired oven function. The default temperature
for that function will be shown on the display.
2. After 5 seconds from the last change, the oven will
begin heating and the “Elapsed time” commences on
the display.
Changing the oven temperature
1. Toggle the selector left ( ) or right ( ) as
required to set the desired cooking temperature. The
temperature setting changes in increments
of 5°C.
2. The set temperature is displayed for 5 seconds from
the last change.
NOTE: The temperature can be adjusted at any time.
Oven temperature cannot be changed for the Defrost or
Pyro function.
Setting the cooking duration
1. Select the desired oven function and cooking
temperature.
2. Press “Clock” button until the
symbol
appears flashing.
3. Set the desired cooking duration “Minutes” by using
or buttons while the symbol
is flashing.
4. Press the
button and the cooking duration
“Hours” will flash and can be set in the same manner.
5. After 5 seconds from the last change, the
symbol will stop flashing confirming the cooking
duration is set.
6. A countdown of the “Cooking time remaining” will be
shown on the display.
7. When the set time has elapsed, a signal will sound
and the oven will turn off. To stop the signal, press
any button on the clock and then turn the oven
selector to “Off”.
NOTE: Do not forget to add pre-heating time if necessary.
Cooking duration cannot be set for the Rapid Heat
function. The cooking duration can be cancelled at any
time by turning the “Function” selector to “Off”.
Setting the cooking end time
1. Select the desired oven function and cooking
temperature.
2. Press
button until the symbol
appears flashing.
3. Set the desired time of day “Hours” to finish cooking
by pressing
or buttons while the symbol
is flashing.
4. Press the
button and the time of day “Minutes”
to finish cooking will flash and can be set in the same
manner.
Praat mee over dit product
Laat hier weten wat jij vindt van de Westinghouse WVE607S Oven. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.