Handleiding Whirlpool ART 480/R-LH Koel-vries combinatie

Handleiding

N C

M Y

ENVIRONMENTAL HINTS

Packing

Ù

Do not throw the packing into the garbage: first sort out

the different materials (i.e.: steel, cardboard, polystyrene)

following local regulations.

Conformity declaration

This appliance incorporates parts intended to come into

contact with foodstuffs in compliance with EEC direc-

tive 89/09/CEE.

Information

This appliance is free of CFC’s (refrigerant circuit contains

R34a) or free of HFC’s (refrigerant circuit contains R600a -

Isobutane). For more details, please refer to the rating

plate on the appliance.

For appliances with Isobutane (R600a)

The refrigerant is a natural gas of high e nvironmental com-

patibility but which is inflammable. Therefore, it is essential

to ensure that the ducts of the refrigerant circuit do not

get damaged.

KNOW YOUR FROST-FREE APPLIANCE

The main advantage of your refrigerator/freezer with fan cir-

culation is the total absence of frost and ice forming on the

compartments walls, thanks to the process described below.

The cold air is produced by an evaporator and is circulated by

means of a fan into the compartments.

The air, having been circulated, is again passed to the evapora-

tor. This keeps the humidity low. In this way, there will be no

frost formation on the compartment walls, as in a traditional

appliance. The moisture in the air is retained by the evaporator,

transformed into frost and then into water, this automatically

flows into a tray where it evaporates. The “ventilated cold” sys-

tem ensures a better storage of foods by maintaining their ori-

ginal condition for a longer period of time.

Besides these characteristics, which are typical of the FROST

FREE system, the 0

o

C special compartment offers the addi-

tional advantage for the storage of delicate and perishable

foods in the low temperature compartment.

DESCRIPTION OF THE APPLIANCE (Fig. )

!

Light control button

"

Refrigerator compartment control button

a

Refrigerator compartment

b

Adjustable grid plates

c

Glass plate

d

Crisper drawers

e

Low temperature compartment to store meats, fish or

particularly delicate or deteriorable foods

§

Low temperature compartment control button (sit-

uated inside the compartment, on the rear wall)

f

Inner door liner with adjustable compartments

$

Fast freeze switch (yellow light)

%

Mains switch (green light) - operation

&

Freezer compartment control knob (adjustable by

means of a coin)

g

Freezer compartment

h

Frozen foods storage baskets

i

Freezing-in basket

l

Acoustic alarm of freezer door open (if provided)

m

Plinth.

INSTALLATION (Fig. 2)

Please check your appliance and ensure that it is undamaged:

any transport damage must be reported to your dealer within

24 hours of receipt. The appliance should not be installed close

to heat sources such as cookers, central heating boilers, direct

sunlight, etc. It must however be located in a well ventilated

dry space, and in a housing following the separate instructions

supplied. The housing has to be provided with a front and rear

ventilation gap. The rear ventilation gap has to remain free: do

not cover it with any object or sheet of paper

(Fig. 3)

.The

door support (if provided)

(Fig. 4)

is for transport purpose

only. After installation of the appliance into the housing, fit the

plinth

(Fig. )

and clean the interior with a sponge dampened

in a solution of lukewarm water and vinegar.

We suggest you reheat slightly the door gaskets

(Fig. 5) to

reestablish their original elasticity.

Attention

Please ensure that the supply socket is accessible after in-

stallation, in case the appliance requires a prompt discon-

nection. If not possible, connect the appliance to a double-

pole switching device with contact separation of at least 3

mm placed in a accessible position even after installation.

ELECTRICAL CONNECTION AND

OPERATION

This appliance has been designed, built and marketed in

compliance with.

- the safety targets of the “Low Voltage” EEC Directive

73/23;

- the protection requirements of the “EMC” EEC Direc-

tive 89/336 amended by EEC Directive 93/68.

Please check that the voltage indicated on the rating plate

situated inside the compartment (Fig. 8) corresponds to

the voltage in your home (Fig. 9).

The earthing of this appliance is compulsory by law.

The manufacturer will accept no liability for injury to

persons or damage to objects arising from the non- ob-

servance of this requirement.

English

5

ELECTRICAL INFORMATION

For Great Britain only

“WARNING - THIS APPLIANCE MUST BE EARTHED”

Fuse replacement.

If the mains lead of this appliance is

fitted with a BS 1363A 13 amp

fused plug, to change a fuse in this

type of plug use an A.S.T.A. appro-

ved fuse to BS 1362 type and pro-

ceed as follows:

1. Removethefusecover(A)and

fuse (B).

2. Fit replacement 13A fuse into

fuse cover.

3. Refit both into plug.

IMPORTANT:

The fuse cover must be refitted when chang-

ing a fuse and if the fuse cover is lost the plug must not be

used until a correct replacement is fitted. Correct replace-

ments are identified by the colour insert or the colour embos-

sed in words on the base of the plug. Replacement fuse cov-

ers are available from your local electrical store.

CONNECTION TO A REWIREABLE PLUG

If the fitted plug is not suitable for your socket outlet, then

it should be cut off and disposed of in order to avoid a

possible shock hazard should it be inserted into a 13A so-

cket elsewhere. A suitable alternative plug should then be

fitted to the cable. The wires in this mains lead are coloured

in accordance with the following code:

BLUE - “NEUTRAL” (“N”)

BROWN - “LIVE” (“L”)

GREEN AND YELLOW - “EARTH” (“E”)

1.

The GREEN AND YELLOW wire must be connected to the

terminal in the plug which is marked with the letter “E” or by

the Earth symbol

4

or coloured green or green and yellow.

2. The BLUE wire must be connected to the terminal

which is marked with the letter “N” or coloured black.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Whirlpool ART 480/R-LH Koel-vries combinatie. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Whirlpool. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Whirlpool ART 480/R-LH Koel-vries combinatie in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Whirlpool Koel-vries combinaties
Meer handleidingen voor Koel-vries combinaties

Veelgestelde vragen over Whirlpool ART 480/R-LH Koel-vries combinatie

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Whirlpool WRT313CZLW Koel-vries combinatie

Handleiding

Whirlpool WRF535SWHW Koel-vries combinatie

Handleiding

Whirlpool W9 821D OX H Koel-vries combinatie

Handleiding

Whirlpool W9 931D IX H 3 Koel-vries combinatie

Handleiding

Whirlpool W7 811O OX Koel-vries combinatie

Handleiding

Whirlpool WTE31132 TS Koel-vries combinatie

Handleiding

Whirlpool WTNF 82O MX Z H Koel-vries combinatie

Handleiding

Whirlpool WRB119WFBM Koel-vries combinatie

Gerelateerde categorieën