Handleiding Whirlpool FFT M11 82 SPT R Wasdroger

Handleiding

TROUBLESHOOTING EN

Before contacting the After-sales Service, refer to the table below. Often the malfunctions are minor and can be solved in few

minutes.

Malfunction Possible cause Solution

The drying

times are very

long.

An appropriate maintenance was not carried out.

Refer to the Cleaning & Maintenance section and perform the

operations described.

The garments are too wet.

Carry out a washing cycle with higher spin speed to remove as much

water as possible.

Room temperature.

The drying time may be longer if the room temperature falls outside

the 14–30°C range.

The programme, the time and/or the drying level

set are not suitable for the type and the amount

of load inserted into the dryer.

Refer to Programmes and Options sections to  nd the programme

and options most suitable for the type of load.

The dryer may be overloaded.

Refer to the Programmes section to check the max load for each

programme.

The tumble

dryer does not

turn on.

The "On/O " button was not pressed.

Press the "On/O " button.

The plug is not inserted into the socket.

Insert the plug into the socket.

The socket is faulty.

Try to plug another appliance in the same socket. Do not use

connecting electrical devices to the socket, such as adapters or

extensions.

A power failure occurred.

Wait for the power supply to be restored and switch the fuse on again

if necessary.

The tumble

dryer does not

start.

The door has not been closed properly.

Close the door.

A time delay was set to the start of the cycle.

For machines equipped with this function: wait for the set delay to

end or switch the machine o to reset it. Refer to the Options section.

The "Start/Pause" button was not pressed. Press the "Start/Pause" button.

The Key Lock function was enabled (for machines

equipped with this option).

If Key Lock was selected, disable it. Switching the machine o will not

disable this option. Refer to the Options section.

Garments are

wet at cycle

completion.

Small load.

The automatic programme has not sensed the required  nal moisture

so that the dryer completes the programme and stops. If this happens

simply select an additional short period of drying or select Extra Dry

option if available.

Large loads or heavier fabrics.

Dryness levels can be modi ed to the speci c dryness desired.

Extra Dry is recommended for ready to wear items.

The drying cycle was paused and then not

reactivated within 15 minutes, causing the

machine to shut down.

The drying cycle has to be set up once more and restarted.

A power failure might have occurred, causing the

machine to shut down.

The drying cycle has to be set up once more and restarted.

Lights on or  ashing

Water tank

The water tank is full. Empty the water tank. Refer to the Cleaning & Maintenance section.

Door  lter

Failure of the air  ow necessary for machine

operation.

Clean the door  lter and check whether air intake is free. Carrying out

these operations improperly may cause damages. Refer to Cleaning &

Maintenance section.

Bottom  lter*

The bottom  lter requires cleaning. Clean the bottom  lter. Refer to Cleaning & Maintenance section.

The presence

of wrench

symbol signals a

malfunction. The machine sensors detected a failure.

Switch the dryer o and unplug it. Open the door immediately and

pull laundry out, to allow the heat to dissipate. Wait for about 15

minutes. Reconnect the dryer to the power supply, load the laundry

and restart the drying cycle. If the problem still occurs, contact

the After-Sales Service Centre and communicate the letters and

digits  ashing on the display.

For instance: F3 and E2.

*Note: some models are auto-cleaning and not equipped with bottom  lter. Please refer to the Cleaning & Maintenance section.

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your product on

www.whirlpool.eu/register

Policies, standard documentation, ordering of spare parts and additional product information can be found by:

• Using QR code in your appliance

• Visiting our website docs.whirlpool.eu/docs and parts-selfservice.europeanappliances.com

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales

Service, please state the codes provided on your product's identi cation plate.

EN

Before using the appliance carefully

read the Safety Instruction.

PLEASE SCAN THE QR CODE ON YOUR APPLIANCE IN ORDER TO REACH MORE INFORMATION.

Quick guide

Before using the appliance carefully

read the Safety Instruction.

05/2024

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Whirlpool FFT M11 82 SPT R Wasdroger. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Whirlpool. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Whirlpool FFT M11 82 SPT R Wasdroger in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Whirlpool Wasdrogers
Meer handleidingen voor Wasdrogers

Veelgestelde vragen over Whirlpool FFT M11 82 SPT R Wasdroger

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Whirlpool WGD5720RW Wasdroger

Handleiding

Whirlpool YWED5605MC Wasdroger

Handleiding

Whirlpool FFT M11 9X2B BE R Wasdroger

Handleiding

Whirlpool WGD8127LC Wasdroger

Handleiding

Whirlpool WED5605MW Wasdroger

Handleiding

Whirlpool YWED6120HW Wasdroger

Handleiding

Whirlpool W6 D83WR BE Wasdroger

Handleiding

Whirlpool WGD6150PB Wasdroger

Gerelateerde categorieën