Handleiding Whirlpool FFT M11 8X3 EE Wasdroger

Handleiding

PROGRAMMES

For choosing the appropriate programme for your kind of

laundry, always respect the instructions on the care labels

of the laundry. The value given in the tub symbol is the

maximum temperature possible for washing the garment.

Mixed (Μικτά)

For washing lightly to normally soiled resilient garments in cotton, linen,

synthetic bres and mixed bres.

White (Λευκά)

For washing normally to heavily soiled towels, underwear, table and bed

linen, etc in resilient cotton and linen. Only when the temperature is

selected at 90°C the cycle is provided with a prewash phase before main

washing phase. In this case it is recommended to add detergent both, in

the prewash and main wash section.

Cotton (Βαμβακερά)

Normally to heavily soiled and robust cottons .

Eco 40-60

For washing normally soiled cotton garments declared to be washable

at 40 °C or 60 °C, together in the same cycle. This is the standard cotton

programme and the most ecient in terms of water and energy

consumption.

Sport (Αθλητικά)

For washing lightly soiled sports clothing (tracksuits, shorts, etc.). For best

results, we recommend not exceeding the maximum load indicated in

the ‚‘‘PROGRAMME CHART‘‘. We recommend using liquid detergent , and

adding the amount suitable for half-load.

Duvet (Παπλώματα)

Designed for washing eiderdown padded items such as double or single

duvets, cushions and anoraks. It is recommended to load such padded

items in the drum with the edges folded inwards and not to exceed ¾ of

the drum’s volume. For optimal washing, we recommend using a liquid

detergent.

Steam Refresh (Φρεσκάρισμα με ατμό)

This programme refreshes garments by removing bad odours and

relaxing the bres (2 kg, roughly 3 items). Insert dry items only (that are

not dirty) and select programme “Steam Refresh”. Garments will be a

little damp at the end of the cycle and can be worn after a few minutes.

The “Steam Refresh” programme makes ironing easier.

! Not recommended for wool or silk garments.

! Do not add softeners or detergents.

Spin & Drain (Στύψιμο & Άντληση)

Spins the load then empties the water. For resilient garments. If you

exclude the spin cycle, the machine will drain only

Rinse & Spin (Ξέβγαλμα & Στύψιμο)

Rinses and then spins. For resilient garments.

Rapid 30’ (Γρήγορο 30’)

For washing lightly soiled garments quickly. This cycle lasts only 30

minutes, saving time and energy.

20 °C

For washing lightly soiled cotton garments, at a temperature of 20 °C.

Wool (Μάλλινα)

All wool garments can be washed using programme ‚“Wool“ even

those carryng the “hand-wash only “ label. For best results, use special

detergents and do not exceed max kg declaration of laundry.

Delicates (Ευαίσθητα)

For washing particularly delicate garments. Preferably turn garments

inside out before washing.

Synthetics (Συνθετικά)

For washing soiled garments made from synthetic bres (such as

polyester, polyacrylic, viscose, etc.) or cotton/synthetic blends.

FIRST TIME USE

To remove any manufacturing debris select the “Cotton” programme at a

temperature of 60°C. Pour a small quantity of detergent powder into the

main wash compartment of the detergent dispenser (maximum 1/3 of

the quantity the detergent manufacturer recommends for lightly soiled

laundry). Start the programme without adding any laundry.

DAILY USE

Prepare your laundry according to the recommendations in the “HINTS

AND TIPS” section. Load the laundry, close the door, open the water tap

and press the “ON/OFF” button to switch the wasching machine on,

the “Start/Pause” button ashes. Turn the programme selector to the

desired programme and select any option if needed. The temperature

and spin speed can be changed by pressing the “Temperature (Θερμ/σία)”

button or the “Spin (Αριθμός στροφών)” button. Pull out the detergent

dispenser and add the detergent (and additives/softener) now. Observe

the dosing recommendations on the detergent pack. Then close the

detergent dispenser and press the “Start/Pause” button. The “Start/

Pause” button will light up and the door will be locked.

PAUSE A RUNNING PROGRAMME

To pause the wash cycle, press the “Start/Pause” ; the indicator light

will go o and the remaining time on display ash. To start the wash cycle

from the point at which it was interrupted press the button again.

OPEN THE DOOR, IF REQUIRED

After starting a programme, the “Door locked” indicator lights up to

show that the door can not be opened. As long as a wash programme is

running, the door remains locked. To open the door while a programme

is in progress, press the “Start/Pause” to pause the programme.

Provided the water level and/or temperature is/are not too high, the

“Door locked” indicator light goes o and you can open the door.

For example to add or remove laundry. Press the “Start/Pause” button

again to continue the programme.

PROGRAMME END

The “Door locked” indicator light goes o and the display shows

“End”. To switch o the washing machine after programme ends press the

“ON/OFF” button, the lights goes o. If you do not press “ON/OFF”

button, the washing machine will switch o automatically after about a

10 minutes. Close the water tap, open the door and unload the washing

machine. Leave the door ajar to allow the drum to dry.

OPTIONS

! If the selected option is incompatible with the programme set,

the incompatibility will be signalled by a buzzer (3 beeps) and the

corresponding indicator light will ash.

! If the selected option is incompatible with another previously set

option, only the most recent selection will remain active.

Clean+ (Καθαρά+)

Clean+ is an option working on 3 dierent levels (Intensive, Daily

and Fast) that are specially designed to set the right washing action,

depending on your cleaning needs:

Intensive : this option is designed for high levels of dirtiness,

removing most stubborn stains.

Daily : this option is designed to remove everyday stains.

Fast : this option is designed to remove lightly soiled stains.

Intensive rinse (Εντατικό ξέβγαλμα)

By selecting this option, the eciency of the rinse is increased and

optimal detergent removal is guaranteed. It is particularly useful for

sensitive skin. Press the button once, two or three times to select an

additional 1

+1

, 2

+2

or 3

+3

rinses after the standard cycle rinse and

remove all traces of detergent. Press the button again to go back to the

“Normal rinse” rinse type.

Start delay (Καθ/ρηση έναρξης )

To set the selected programme to start at a later time, press the button

to set the desired delay time. Symbol lights on the display when this

fuction is enabled. To cancel the delayed start, press the button again

untile the value ‚‘‘0‘‘ is shown on the display.

This option enhances washing performance by generating steam

to inhibit the proliferation of the main bad odour sources inside the

machine. After steam phase, the washing machine will perform gentle

tumbling through slow rotations of the drum. option starts after

the cycle ends for a maximum duration of 6h and you can interrupt it at

any time by pressing any button on control panel or turning the knob.

Wait around 5 minutes before door can be opened.

Temperature

Every programme has a predened temperature. If you want to change

the temperature, press the “Temperature (Θερμ/σία)” button. The value

appears on the display.

Spin

Every programme has a predened spin speed. If you want to change

the spin speed, press the “Spin (Αριθμός στροφών)” button. The value

appears on the display.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Whirlpool FFT M11 8X3 EE Wasdroger. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Whirlpool. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Whirlpool FFT M11 8X3 EE Wasdroger in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Whirlpool Wasdrogers
Meer handleidingen voor Wasdrogers

Veelgestelde vragen over Whirlpool FFT M11 8X3 EE Wasdroger

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Whirlpool FFT M22 9X2B EE Wasdroger

Handleiding

Whirlpool WGD6605MC Wasdroger

Handleiding

Whirlpool YWED5010LW Wasdroger

Handleiding

Whirlpool WCD3090JW Wasdroger

Handleiding

Whirlpool WGD5050LW Wasdroger

Handleiding

Whirlpool YWED6605MC Wasdroger

Handleiding

Whirlpool FFT M11 8X3BY EE Wasdroger

Handleiding

Whirlpool FFT M11 72 EE Wasdroger

Gerelateerde categorieën