Handleiding Whirlpool OMK58RU0B Oven

Handleiding

Conventional position; if the oven is set to a dierent

temperature, the function will not start.

Please note: You can set the cooking time, cooking end time (only if

you set a cooking time) and a timer.

3. PREHEATING AND RESIDUAL HEAT

Once the function starts, an audible signal and a ashing icon

on the display indicate that the preheating phase has

been activated.

At the end of this phase, an audible signal and the xed icon

on the display will indicate that the oven has reached

the set temperature: at this point, place the food inside and

proceed with cooking.

Please note: Placing the food in the oven before preheating has

nished may have an adverse eect on the nal cooking result.

After cooking and with the function deactivated, the icon

may continue to remain visible on the display even after the

cooling fan has switched o to indicate that there is residual

heat in the compartment.

Please note: The time after which the icon switches o varies

because it depends on a series of factors such as ambient

temperature and function used. In any case, the product should be

considered to be o when the pointer on the selection knob is at

“0”.

4. PROGRAMMING COOKING

You will need to select a function before you can start

programming cooking.

DURATION

Keep pressing until the icon and “00:00” start ashing

on the display.

Use or to set the cooking time you require, then press

to conrm.

Activate the function by turning the thermostat knob to the

temperature you require: an audible signal will sound and the

display will indicate that cooking is complete.

Please note: To cancel the cooking time you have set, keep pressing

until the icon starts ashing on the display, then use to

reset the cooking time to “00:00”. This cooking time includes a

preheating phase.

PROGRAMMING THE END COOKING TIME/

DELAYED START

After a cooking time has been set, starting the function can be

delayed by programming its end time: press until the

icon and the current time start ashing on the display.

Use or to set the time you want cooking to end and

press to conrm.

Activate the function by turning the thermostat knob to the

temperature you require: the function will remain paused until

it starts automatically in time calculated based on selected

cooking end time.

Please note: To cancel the setting, switch the oven o by turning

the selection knob to

position.

Delay to start functionality is not available for Grill and Turbo

Grill functions.

END OF COOKING

An audible signal will sound and the display will indicate that

the function has nished.

Turn the selection knob to select a dierent function or to

to switch the oven o.

Please note: If the timer is active, the display will show “END”

alternately with the remaining time.

5. SETTING THE TIMER

This option does not interrupt or program cooking but

allows you to use the display as a timer, either during while a

function is active or when the oven is o.

Keep pressing

until the icon and “00:00” start ashing

on the display.

Use or to set the time you require and press to

conrm. An audible signal will sound once the timer has

nished counting down the selected time.

Notes: To cancel the timer, keep pressing

until the icon

starts ashing, then use to reset the time to “00:00”.

6. AUTOMATIC CLEANING FUNCTION – PYRO

Do not touch the oven during the Pyro cycle.

Keep children and animals away from the oven during

and after running the Pyro cycle, until the room has

nished airing.

Remove all accessories - including shelf guides - from the oven

before activating the function. If the oven is installed below

a hob, make sure that all the burners or electric hotplates are

switched o while running the selfcleaning cycle.

For optimum cleaning results, remove excessive residuals

inside the cavity and clean the inner door glass before using

the pyrolytic function.

Avoid activating the pyro cycle cleaning in the presence of

limescale residues.

We recommend only running the Pyro function if the

appliance contains heavy soiling or gives o bad odours

during cooking.

To activate the automatic cleaning function, turn the selection

knob and the thermostat knob to the

icon. The function

will be activated automatically, the door locked and the light

inside the oven switched o: The display will show the time

remaining to the end, alternating with “Pyro”.

Once the cycle has been completed, the door remains locked

until the temperature inside the oven has returned to a safe

level. Air the room during and after running the Pyro cycle.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Whirlpool OMK58RU0B Oven. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Whirlpool. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Whirlpool OMK58RU0B Oven in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Whirlpool Ovens
Meer handleidingen voor Ovens

Veelgestelde vragen over Whirlpool OMK58RU0B Oven

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Whirlpool W7 OM4 4S1 H Oven

Handleiding

Whirlpool W7 OM4 4S1 C Oven

Handleiding

Whirlpool OMK58CU1SX Oven

Handleiding

Whirlpool AKP 458/WH Oven

Handleiding

Whirlpool W7 OM4 4BPS1 P SE Oven

Handleiding

Whirlpool OA 2N8F D WH Oven

Handleiding

Whirlpool W6 OS4 4S2 P BL Oven

Handleiding

Whirlpool WOS11EM4EB Oven

Gerelateerde categorieën