Handleiding Wilderness Equipment Second Arrow Tent

Handleiding

Setting up the SPACE 1, SPACE 2 and SPACE 3

WE Space tent models use a unitary framework system with our unique

dihedral hubs. The inner tents are set up  rst and can be used with or without

the outer skin  tted. Outer tents can be set up without the inner if the ground

sheet option is carried. The small end of the Space models should face the

wind. The bigger Space 3 has an optional small end fairing to reduce wind

loading on the tent in fresh and stronger wind conditions.

1. Connect up all parts of the framework. With the inner tent laid out on the

ground (pre-pegging the  oor corners helps), insert the end-colour-coded

pole tips into their pole feet  ttings,  rst at one end of the tent, then the

other.

2. Clip the inner canopy up to the framework, starting at the hubs is best.

3. On Space 1 and 2 models  t the short cross pole OVER the main arch,

springing its ends into the webbing strap pockets. The eyelets also provided

on these straps are for the tips of your walking or ski poles, inverted and

adjusted to length. These give the tent incredible stability in strong wind

but it must be  rmly and reliably pegged so the poles can not dislodge. The

Space 3 model uses a full length transverse pole,  tted UNDER the frame.

4. All Space inner tents have an internal hub-to-hub tension system. Use this

adjustable cord to maintain and improve headroom, stability in strong

wind, resistance to snow accumulation and as a hanging line. Make sure it is

connected if you are going away from your tent for some time.

5. Now read the general ‘Inner-Pitch-First’ instructions but note that Space

1 and 2 outer tents have pockets under the ends of the cross ridge seam

that must be  tted over the cross pole ends (before other outer skin

connections).

6. Space tents have very effi cient vents. Space 1 and 2 vents zip down and the

fabric triangles can also be toggled back to the inner tent to de ect rain.

7. When folding Space frameworks start at the (overhead) mid-point/s. Hubs

must be fully disconnected from tubes for most compact folding. With the

4-hub Space 3 framework separate the short poles linking the hubs at each

end  rst, bring the two overhead poles together and start the folding, both

poles together in one action, from the mid-point.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Wilderness Equipment Second Arrow Tent. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Wilderness Equipment. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Wilderness Equipment Second Arrow Tent in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Wilderness Equipment Tenten
Meer handleidingen voor Tenten

Veelgestelde vragen over Wilderness Equipment Second Arrow Tent

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Wilderness Equipment Space Station Tent

Handleiding

Wilderness Equipment Space 1 Tent

Handleiding

Wilderness Equipment I-Shadow Tent

Handleiding

Wilderness Equipment Space 3 Tent

Handleiding

Wilderness Equipment I-Explore 3 Tent

Handleiding

Wilderness Equipment First Arrow Tent

Handleiding

Wilderness Equipment Space 1 Winter Tent

Handleiding

Wilderness Equipment Tectite 4 UL Tent

Gerelateerde categorieën