Handleiding Winix AM80 Luchtreiniger

Handleiding

1

4

2

5

3

6

PACKAGE CONTENTS

FRONT BACK

Control Panel

Front Panel

Air Outlet

Vent

Handle

Power Plug

(1) Pre-Filter

(1) Washable AOC™ Carbon Filter

(1) True HEPA Filter

Unit User Manual

AM80

The product warranty is printed on the back of this guide.

This product is manufactured for use only in USA / CA.

This product is suitable for 120 V only.

WHERE TO USE

MODEL PART DIAGRAM

12~18 in

12~18 in

Allow 12 ~ 18 in. of space between TVs, radios, and other electronics

Electromagnetic interference from certain electronics may cause

product malfunction.

Place indoors away from direct sunlight

Direct exposure may cause product malfunction or failure.

Only place on hard, flat surfaces

Flimsy or slanted surfaces may result in abnormal noise and vibrations.

Allow 12 ~ 18 in. from walls for maximum air flow

01. Auto Mode Indicator

The LED "Auto" light will indicate when Auto Mode is

activated.

02. Air Quality Indicator

Color coded LED light indicates one of three levels of

Air Quality: Red (poor), Amber (fair), and Blue (good).

03. Fan Speed Indicator

Indicates the current fan speed.

Auto Mode Low Medium

High Turbo

04. PlasmaWave

®

Indicator

Indicates whether PlasmaWave

®

is enabled or

disabled.

05. Sleep Mode Indicator

When Sleep Mode is activated, the Air Quality

Indicator LED light is disabled.

Fan speed will automatically set to minimum speed

(lower than 'Low') which will be nearly silent.

When Sleep Mode is active, PlasmaWave

®

will be

disabled, but it can be turned back on.

06. Filter Replacement Indicator

LED light indicates when it is time to change the filter.

CONTROL PANEL

07. Filter Reset Button

After replacing the True HEPA Filter, use a small object

such as a paper clip, to press and hold the Filter

Reset Button for at least 5 seconds until the Filter

Replacement Indicator turns off.

08. Odor Sensor

Detects the amount of odorous gas in the

environment. When in Auto mode, the fan speed

adjusts according to the detected amount of gas.

09. Power Button

Turns the unit on or off. During the first 30 seconds

of powering up, the Air Quality Indicator will cycle

through Blue, Amber and Red colors.

•

Odor Sensor takes approximately 4minutes to

detect the air quality in the environment before

normal operation begins.

10. Mode Button

Press to cycle through to set the mode of operation

(Auto, Sleep). The unit will default to Auto with

PlasmaWave

®

enabled when first powered on.

Auto Mode:

•

Auto Mode automatically adjusts fan speeds

according to your indoor air quality. The fan speed

will adjust to low when air quality is good, medium

when fair, and to high when poor.

Sleep Mode:

When Sleep Mode is activated, the Air Quality

Indicator LED light is disabled.

•

Fan speed will automatically set to minimum speed

(lower than 'Low') which will be nearly silent.

•

When Sleep Mode is active, PlasmaWave

®

will be

disabled, but it can be turned back on.

11. PlasmaWave

®

Button

Press the Plasmawave

®

button when the unit is on to

enable or disable this feature. By default,

PlasmaWave

®

is enabled whenever the unit is

powered on.

"When the unit is running, you may hear a chirping

or buzzing sound. The sound is from large particles

passing through PlasmaWave

®

, it is normal and does

not signify product failure."

12. Light Sensor

Detects the amount of ambient light in the

environment. When in Auto Mode, the Light Sensor

detects when to put the unit into Sleep Mode.

When to Replace Filters

Filter Indicator Light When to Service When to Replace

Pre-Filter

none Clean once every 14 days Permanent

Washable AOC™

Carbon Filter

none Clean once every 3 months

Lasts Approx. 12 months

True HEPA Filter

Can NOT be WASHED

•

When the Check Filter Indicator LED is on, it is time to replace the True HEPA Filter and Washable AOC™ Carbon Filter.

•

Intervals between filter replacement may vary depending on environment.

MAINTENANCE

3

True HEPA Filter

2

Washable AOC™

Carbon Filter

4

PlasmaWave

®

Pre-Filter

1

4-STAGE AIR PURIFICATION

01. Pre-Filter

Designed to catch larger airborne particles found

indoors.

03. True HEPA Filter

Captures 99.97%* of airborne allergens including; pollen,

mold spores, dust, pet dander, microbes, and smoke

(*Particles as small as 0.3 microns in size.)

02. Washable AOC™ Carbon Filter

Reduces VOCs and household odors from cooking,

pets, and smoke.

04. PlasmaWave

®

PlamaWave

®

creates Hydroxyls which can help to

reduce the presence of airborne Bacteria, Viruses*

(*Based on independent

laboratory test conducted on

Influenza A Virus H3N2, E. coli, Pseudomonas aeruginosa,

Staphylococcus aureus, Salmonella typhimurium.)

INITIAL OPERATION

Latch

1.

Remove the front panel by grasping its upper

edge and gently pulling forward.

2.

Remove the Pre-Filter, then the bag of filters

behind it.

3.

Remove filters from protective plastic bag.

4.

Install the filters until they fit securely in place.

03. True HEPA Filter (back)

02. Washable AOC™ Carbon Filter (middle)

01. Pre-Filter (front)

Latch

5.

After filters are installed, close the front panel.

6.

Insert the power cord into an electrical outlet.

After replacing a filter,

press the Filter Reset Button

for at least 5 seconds.

REPLACING FILTERS

CLEANING CARE

Cleaning the Filters:

Use a vacuum cleaner or soft brush to clean the

Pre-Filter

•

If it is excessively soiled, rinse in room temperature water.

•

Do not use detergent or soap.

•

Allow the filter to dry for 24 hours or more before

using.

•

Intervals between filter cleaning may vary

depending on the air quality in the environment.

•

Do not use hot water over 104

o

F.

•

Do not use detergent or soap.

•

Allow the filter to dry for 24 hours or more before

using.

NOTICE

Do not use benzene, alcohol, or other volatile fluids,

which may cause damage or discoloration.

Cleaning the Exterior & Interior:

Wipe with a soft damp cloth using room temperature

water.

•

Afterwards, wipe it down with a clean, dry cloth.

Open the front panel and clean the interior with a

vacuum cleaner.

•

For optimal performance, clean every 1-2 months.

NOTICE

•

When cleaning the unit, always unplug the power cord

first and then wait until the unit has cooled down.

•

Never disassemble, repair, or modify this unit yourself.

•

Do not use flammable sprays or liquid detergents.

•

Do not allow children to clean or maintain the unit.

•

Before cleaning or maintaining, ensure unit is unplugged.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Winix AM80 Luchtreiniger. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Winix. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Winix AM80 Luchtreiniger in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Winix Luchtreinigers
Meer handleidingen voor Luchtreinigers

Veelgestelde vragen over Winix AM80 Luchtreiniger

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Winix WACU450 Luchtreiniger

Handleiding

Winix A231 Luchtreiniger

Handleiding

Winix T810 Luchtreiniger

Handleiding

Winix C535 Luchtreiniger

Handleiding

Winix 5500-2 Luchtreiniger

Handleiding

Winix AUS-1250AZPU Luchtreiniger

Handleiding

Winix 5300-2 Luchtreiniger

Handleiding

Winix WACP450 Luchtreiniger

Gerelateerde categorieën