Handleiding Zanker KHB90460XA Afzuigkap

Handleiding

2

SAFETY WARNING

The minimum distance between the hob surface on which the pans

stand and the lower part of the hood must be 65 cm, unless otherwise

specifi ed in the installation instructions. If the hob installation instructions

specify a greater distance, it must be taken into account.

The air collected must not be conveyed into a duct used to blow off

smokes from appliances fed with an energy other than electricity (central

heating systems, thermosiphons, water-heaters, etc.).

Comply with the offi cial instructions provided by the competent autho-

rities in merit when installing the disposal duct. In addition, exhaust air

should not be discharged into a wall cavity, unless the cavity is designed

for that purpose.

The room must be well aerated in case a hood and some other heat

equipment fed with an energy other than electricity (gas, oil, coal heaters,

etc) operate at the same time.

In fact the intake hood, disposing of air, could create a vacuum in the

room. The vacuum should not exceed 0,04mbar. This prevents the gas

exhausted by the heat source from being intaken again. It is therefore

advisable to ensure the room contains air taps able to ensure a steady

fl ow of fresh air.

Check the data label inside the appliance; if the symbol (

) is printed,

read the following: this appliance has such technical particulars that it

belongs to class II insulation, therefore it must not be earthed.

Check the data label inside the appliance; if the symbol ( ) is NOT prin-

ted, read the following: ATTENTION: This appliance must be earthed.

When making the electrical connections, check that the current socket

has a ground connection.

When making the electrical connections, check that the voltage values

correspond to those indicated on the data plate inside the appliance

itself. In case your appliance is not fi tted with a supply cord and a plug

or with other means for disconnection from the supply mains having

a contact separation in all poles that provide full disconnection under

overvoltage category III conditions, that means for disconnection must

be incorporated in the fi xed wiring in accordance with the wiring rules.

If your unit features a power lead and plug, position this so the plug is

accessible.

Always switch off the electricity supply before carrying out any cleaning

or servicing operations on the appliance.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Zanker KHB90460XA Afzuigkap. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Zanker. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Zanker KHB90460XA Afzuigkap in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Zanker Afzuigkappen
Meer handleidingen voor Afzuigkappen

Veelgestelde vragen over Zanker KHB90460XA Afzuigkap

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Zanker KHB92650XA Afzuigkap

Handleiding

Zanker KHC62460XK Afzuigkap

Handleiding

Zanker ZKC6244X Afzuigkap

Handleiding

Zanker ZKC9141 Afzuigkap

Handleiding

Zanker KHV64750BA Afzuigkap

Handleiding

Zanker ZKC6141X Afzuigkap

Handleiding

Zanker ZKC9244X Afzuigkap

Handleiding

Zanker KHC62650XA Afzuigkap

Gerelateerde categorieën