Handleiding Zanussi GPZ263LK Kookplaat

Handleiding

Liquid gas

Use the rubber pipe holder for liquid gas. Always

engage the gasket. Then continue with the gas

connection.

The flexible pipe is prepared for apply when:

• it can not get hot more than room temperature,

higher than 30°C;

• it is no longer than 1500 mm;

• it shows no throttles;

• it is not subject to traction or torsion;

• it does not get in touch with cutting edges or

corners;

• it can be easily examined in order to make sure

its condition.

The control of preservation of the flexible pipe

consists in checking that:

• it does not show cracks, cuts, marks of burnings

on the two ends and on its full length;

• the material is not hardened, but shows its

correct elasticity;

• the fastening clamps are not rusted;

• expired term is not due.

If one or more defects are visible, do not repair the

pipe, but replace it.

WARNING! When installation is

complete, make sure that the seal of

each pipe fitting is correct. Use a

soapy solution, not a flame!

INJECTORS REPLACEMENT

1. Remove the pan supports.

2. Remove the caps and crowns of the burner.

3. With a socket spanner 7 remove the injectors

and replace them with the ones which are

necessary for the type of gas you use (see

table in "Technical Data" chapter).

4. Assemble the parts, follow the same procedure

backwards.

5. Replace the rating plate (it is near the gas

supply pipe) with the one for the new type of

gas supply. You can find this plate in the

package supplied with the appliance.

If the supply gas pressure is changeable or different

from the necessary pressure, you must fit an

applicable pressure adjuster on the gas supply

pipe.

CONVERSION TO G20 13 mbar

For the G20 13 mbar conversion

please contact our Authorised Service

Centre.

ADJUSTMENT OF MINIMUM LEVEL

To adjust the minimum level of the burners:

1. Light the burner.

2. Turn the knob on the minimum position.

3. Remove the knob.

4. With a thin screwdriver, adjust the bypass

screw position (A).

A

5. If you change:

• from natural gas G20 13 mbar or natural

gas G20 20 mbar to liquid gas, fully tighten

the bypass screw in.

• from liquid gas to natural gas G20 13 mbar,

undo the bypass screw about 1/2 of a turn.

• from liquid gas to natural gas G20 20 mbar,

undo the bypass screw about 1/4 of a turn.

• from natural gas G20 13 mbar to natural

gas G20 20 mbar, tighten the bypass

screw about 1/4 of a turn.

• from natural gas G20 20 mbar to natural

gas G20 13 mbar, undo the bypass screw

about 1/4 of a turn.

WARNING! Make sure the flame does

not go out when you quickly turn the

knob from the maximum position to the

minimum position.

ELECTRICAL CONNECTION

• Make sure that the rated voltage and type of

power on the rating plate agree with the voltage

and the power of the local power supply.

• This appliance is supplied with a mains cable. It

has to be supplied with a correct plug which

can hold the load that the rating plate rates.

Make sure that you install the plug in a correct

socket.

• Always use a correctly installed shockproof

socket.

• Make sure that there is an access to the mains

plug after the installation.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• There is a risk of fire when the appliance is in

connection with an extension cable, an adapter

or a multiple connection. Make sure that the

ground connection agrees with the standards

and regulations.

• Do not let the power cable to heat up to a

temperature higher than 90° C.

7

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Zanussi GPZ263LK Kookplaat. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Zanussi. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Zanussi GPZ263LK Kookplaat in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Zanussi Kookplaten
Meer handleidingen voor Kookplaten

Veelgestelde vragen over Zanussi GPZ263LK Kookplaat

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Zanussi ZXE66X Kookplaat

Handleiding

Zanussi ZVE6004F Kookplaat

Handleiding

Zanussi ZGG566414C Kookplaat

Handleiding

Zanussi ZGLR646C Kookplaat

Handleiding

Zanussi ZVT64X Kookplaat

Handleiding

Zanussi ZGH62424XA Kookplaat

Handleiding

Zanussi ZGM64300X Kookplaat

Handleiding

Zanussi ZIFN633K Kookplaat

Gerelateerde categorieën