Handleiding Zelmer ZMB6000 Baardtrimmer

Handleiding voor je Zelmer ZMB6000 Baardtrimmer nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 1 veelgestelde vraag, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

WE WOULD LIKE TO THANKS YOU FOR CHOOSING ZELMER, WE WISH
THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.
WARNING
PLEASE READ THE INSTRUCTIONS FOR USE CAREFULLY PRIOR TO
USING THE PRODUCT. STORE THESE IN A SAFE PLACE FOR FUTURE
REFERENCE.
DESCRIPTION
1 - Blades
2 - On switch
3 - Digital display screen
4 - Limit comb 3mm(a)/6mm(b)/9mm(c)/12mm(d)
5 - USB charging cable
6 - Brush
7 - Lubricating oil
SAFETY INSTRUCTIONS
This device can be used by children aged 3
or over under supervision. This device can
be used by children aged 8 years and
above and persons with reduced physical,
sensory or mental abilities or lack of
experience and knowledge if they are
supervised or have received proper
instructions regarding use of the device in a
safe manner and understand the dangers
involved. Children must not play with the
device. Cleaning and maintenance
operations to be performed by the user
must always be supervised.
This device can only be connected with the
USB interface (5VDC, Output Max 1A).
Follow the DEVICE CHARGE instructions
in order to charge it.
Follow the device BATTERY REMOVAL
instructions for removal of the batteries from
the device.
This appliance is intended for use at a
maximum altitude of 2000m above sea
level.
IMPORTANT WARNINGS
This appliance is designed for home use and should never be used for
commercial or industrial use under any circumstances.
Do not use the device on wet hair.
Do not use connect or disconnect the device to the mains with your hands or
feet wet. Do not use any accessories other than those supplied.
Do not use this device near to bathtubs, showers, sinks or other tanks that
contain water.
The mains connection cable must not be tangled or wrapped around the
product during use. Do not pull on the cable to unplug it or use it to carry the
product.
Do not wrap the cable around the device.
Proceed according to the cleaning section of this manual for cleaning. Do not
use the product on animals.
Unplug the product immediately from the mains in the event of any breakdown
and contact an authorised Technical support service.
In order to prevent any risk of danger, do not open the device. Only qualified
technical personnel from the brand´s Official Technical support service may
carry out repairs or procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty
null and void. Only an authorised technical support service centre may carry out
repairs on this product.
B&B TRENDS SL. disclaims all liability for damages that may occur to people,
animals or objects, for the non-observance of these warnings.
CHARGING THE DEVICE
Before using your beard trimmer for the first time, charge for 2-3 hours, and
charge 2 hours regularly. Ensure the product is switched off. First insert the
plug on the end of the USB charging cable lead into the unit �(Fig. 1) and then
connect the USB charging cable to the USB interface. This appliance is suitable
for 5V DC Max 1A charger, computer and other power interface (Fig. 2). The
charging indicator icon will flash on the LCD display when it's charging and
when it's fully charged it will show 99. The display will always show the
remaining battery level.
Your hair clipper cannot be overcharged. However, if the product is not going to
be used for an extended period time (2-3 months), unplug it from the mains and
store. Fully recharge your hair clipper when you like to use it again.
To preserve the life of your batteries, let them run out every 2 months then
recharge for 2-3 hours again.
INSTRUCTIONS FOR USE
Prior to turning the device on, select the desired comb guide (a,b,c or d) fitting it
by pushing forward in a proper way (fig 3-4). If the hand combing needs to be
ZMB6000
INSTRUKCJA UŻYTKOWANIA
Trymer
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
Триммер
VOD K POUŽITÍ
Zastřihovač
ИНСТРУКЦИИ ЗА УПОТРЕБА
Тример за брада
VOD NA UOBSLUHU
Zastrihávač
ІНСТРУКЦІЯ ПО ЗАСТОСУВАННЮ
Тример
USER MANUAL
Beard Trimmer
BENUTZERHANDBUCH
Trimmer
HASZNÁLATI UTASÍTÁS
Trimmer
INSTRUCȚIUNI DE UTILIZARE
Trimmer
PL
EN
DE
CZ
SK
HU
RO
RU
UA
BG
ZMB6000
replaced, pull upwards by hand. Open the bottom end of the comb lock and
push forward (fig 5-6).
Choose between four levels of matching comb to cut hair of different lengths.
The length of the cut is indicated on each limit comb as follows:
HOW TO SWITCH ON/OFF THE LOCK
FUNCTION?
Long press for 3 seconds to lock the machine and then long press for 3
seconds to unlock. The display will show lock function icon when it's activated.
HOW TO TRIM BEARD
For different beard styling please refer from Fig.7 to Fig.12
MAINTENANCE AND CLEANING
After a continuous use of more than 15 minutes, the display will show washing
function icon as a reminder.
It will disappear if you turn off the machine and turn it on again.
You can rinse the blades under the tap and make sure to dry them properly.
Unplug the product when you do not intend to use it for an extended period of
time to prolong its shelf-life. Allow the device to cool down prior to storage.
Separate the tool head from the body and use the cleaning brush to remove
dust from the internal parts (Fig.13).
Apply a drop of oil on one of the edges of the blades for their maintenance, and
turn on the device for a few seconds to distribute it. This should be done when
you notice a certain amount of difficulty during the trimming operation (Fig. 14)
Ensure that the device is unplugged prior to cleaning it.
This device may only be cleaned with a damp cloth, and chemical products
must never be used for the same.
PRODUCT DISPOSAL
Download de handleiding in het Nederlands en/of Engels (PDF, 13.98 MB)
(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…

Beoordeling

Laat ons weten wat je van de Zelmer ZMB6000 Baardtrimmer vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Bent u tevreden over de Zelmer ZMB6000 Baardtrimmer?
Ja Nee
Beoordeel dit product als eerste
0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Zelmer ZMB6000 Baardtrimmer. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Zelmer ZMB6000 Baardtrimmer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Zelmer. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Zelmer ZMB6000 Baardtrimmer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk Zelmer
Model ZMB6000
Categorie Baardtrimmers
Bestandstype PDF
Bestandsgrootte 13.98 MB

Alle handleidingen voor Zelmer Baardtrimmers
Meer handleidingen voor Baardtrimmers

Veelgestelde vragen over Zelmer ZMB6000 Baardtrimmer

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Kan ik een baardtrimmer ook voor hoofdhaar gebruiken? Geverifieerd

Baardtrimmers hebben dunnere bladen dan tondeuses, en zijn hierdoor beter geschikt voor korte haren. Tondeuses zijn specifiek ontworpen om hoofdhaar bij te werken.

Ik vind dit nuttig (99) Lees meer
Handleiding Zelmer ZMB6000 Baardtrimmer